Added: 11 months ago
From: Flowmaster
Views: 35,226
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (66)

Sign In or Sign Up now to post a comment!
  • super 10's are the best sounding by far should have got them instead of my dnomax bullets

  • Awesome delta 44s for sure

  • good ole dronemasters

  • those HP2s sound nasty!! however, i would like to hear all of the mufflers w/an H pipe set up. x pipe gives the muffler a higher pitch. GREAT job though flowmaster! very entertaining & helpfull. HP2s who knew??

  • I choose the HP2

  • where's the rest of the car? lol

  • love the sound of the hp2 shorties

  • Orignal 40's are the Best..

  • OPEN HEADER BEST

  • Super 10 series !

  • keep your fuckin mufflers. GIMME THAT CHEVELLE

  • tem para gm six cilinder 250" ? model? 

  • ahhhhhh,the 10's sound good

  • are the 10s stret legal?

  • @sjpro1 lol keep them quiet yeah 

  • liked the first two,, would have liked to hear them all at an idle,, engine wont idle?

  • I had the 40 series and move into the super44's. I am now looking into the 10 series for my 2011 Silverado.

  • i would sit there all day doing that with open header

  • @fudgeman333 lol me too mee too...WAIT i doo hahahaha i gota 77 4x4 mud truck open headers i start up now and again..piss my neibors off lil pit.../...350 edelbrock eps intake edelb. carb camed up a lil bit...she loud

  • I like this vid because it is a mock up of a real exhaust set up and you can hear all the different series. Thanks this helps

  • flowmaster the best exhaust company!

  • did that small block eat a ricer and get the $#!%'s or what......

  • We couldnt hear the mufflers because the guy wouldnt let the motor idle!

  • THATU IS A FT ASS, EWWW!!

  • LONG TUBES ALL THE WAY FOOL!!!

  • Anyone know the average price for dual 40 series and installation?

  • yall should try it with a stock 350,& which 1 is the loudest?,aneybody

    

  • that flywheel is hypnotizing

  • Either rev the guts out of it or dont rev it at all. Seriously.

  • Let's have a real comparison, fire up that '67 Chevelle with the double fatty tires and see what it sounds like!!!

  • the best sound on a mustang SLP LOUDMOUTH 1

  • He barely reving the motor!!! I think this video should be made over with someone else!

  • @but199018 This is a customers brand new engine, so I didnt want to beat on it too much before he got to play with it. Watch the comparison video with the 3 inch, since that was my personal engine I winged it a little harder. It's never good to just free rev an engine without a load on it anyways.

  • flowmaster aint a bad muffler, but for the money you can't beat a magnaflow or borla, sure they cost more but they'll outlast the flowmaster and will produce more power. i always refer to the flowmaster mufflers more of the "noise" mufflers.

  • @dannyho69 glasspack all the way man... i personaly dont like any of the flowmasters

  • Ey so wats better dual flow master or a cherry bomb glass pack I want to install dem on a 1970 impala it has a 350 engine

  • @dannyho69 dual 50s

  • i loke the super 10

  • Still like the delta series muffliers.Both the 40 and 50 are on my cars.

  • open headers sounds the best

  • @DPense Open headers are for idiots. It's just noise, and not good noise either. Plus, you're losing a good bit of power.

  • @ESPViper5001 your opinion not mine and if you lose power why do drag cars run open headers

  • @DPense Because it's a drag engine. Big difference between something for the street and something for the strip. An engine with such power would benefit from no back pressure. The faster you get the air out of an engine with forced induction, the better. Why do you think there are guidelines for exhaust piping? You should only go above 3" if you're putting out 300-350+ hp and so on. There's a reason.

    Either way, do what you want, but it's not good for a street engine to be running open headers.

  • @ESPViper5001 again your opinion not mine and why do you care what i like

  • @ESPViper5001 Question and I'm not being a smartass here I'm being serious because I was thinking of running 3 inch pipes all the way, how is that not good for a street car pushing less than 350 hp? I have a stock 95 mustang gt, well somewhat stock it's only making 275 at the wheels for now, would it be bad to run 3 inch pipes all the way?

  • what is recommended for a 2010 altima? i wanted it to sound loud but not like a annoying sound.

  • @adrianz54 no ricers will sound alike.

  • Yeah hp shortys sound the best because they're almost like straight through mufflers..the rest just sound so hollow.

  • super 10's all the way... 3" inch exhaust headers back no cats is the best sounding exhaust out there..got it on my 355 :)

  • Thank y'all for making this video. This is a big help compared to the common camera under a bumper videos. I've never heard the hushpower shorties, and they are definately a possibility for my 67 stang. If you could get a video with the shorties on a 302, that would really help.

  • The shorties sounded the best for this motor IMO

  • I'm actually friends with some of the Flowmaster guys who do these particular videos and the reason this motor didn't get reved up higher is that the motor is brand new and it belonged to a customer. I wish everyone could hear all these mufflers in person, they sounded freakin awesome!!

  • Open headers sounded best.....HA!!!

    All joking aside,the super 10 and hp2 shortie sounded awesome.I have always been scared the hushpowers were to quiet but they sounded awesome! I have had a bad experience with flowmaster in the past but this vid changed my view,and I will be putting some flowmasters on my dodge project truck now,you can bet on it!

    Just me,(no disrespect) but next time rev her a little higher so we can hear it growl a little more!

    Keep up the good work guys!

  • I do have a suggestion, I don't want to sound rude or offensive in any way. "Flowmaster" should have broken-in all the mufflers. They sound much better after a few days of breaking in. All I all thank you very much for the comparisons.

  • Good job....I think I would of liked it rev d up a little more

  • For the people that like the video leave a comment or make a suggestion. I'm sure the guys that made it put alot of time into it. But for the people that wanna piss and moan about the video, go find something to do. You dont have to watch it but its helpful to others, so there is no point in tearing down people for doing something that doesn't meet YOUR expectations.

  • I agree with 05front, my lap top has ok spearkers but I hooked it up to my stereo to get all the tones and I think they sound as good as they can without being there in person. This is there second video and they are more helpful, informative and useful than some guy laying a 25 dollar video camera under the bumper of his mustang and reving the shit out of it.

  • to all who watch this

    1. it depends on your speakers, if you have a sub or not.

    2. the mufflers all have a "break in period"

  • i have the flowmaster super 10 on my dodge (360) and will blow these sounds away.. very bad comparison thumbs down and no stars!!!

  • @dodge2289 it sounds like crap cuz he lets off the throttle linkage as soon as he revs it, instead of revving it and letting off the linkage a bit slower.

  • @BeastGT87 also wit nothing on the flywheel like a torque converter or flywheel it revs up and down so fast it really does not sound like a normal car.

  • you guys need to fix something... they all sound like shit its either your camera or the pipes! most vehicles sound nothing like wut these sound like!!!

  • /watch?v=BmZJV113Zew&feature=c­hannel_video_title

    a-mazing sound. probably 10 series with no cats.

    flowmaster is superior to all..... hope to see vids of these mufflers at higher rpm!!

  • Comment removed

  • Comment removed

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more