Most likely the tail motor has burned out - a very common issue on helis like these. Before you buy a new motor though, check all the connections to it are OK.
it keeps spinning round even when the tail motor isnt moving? and do i tighten the main blades to max because at the moment i am using them how they came in the box just lining them up each time i crash? thanks
The tail rotor is there to control the spinning - if you can't stop the heli spinning round then the tail motor might be faulty. Does the tail rotor respond to the stick movements on the trasnmitter ok? Holding the stick over to the left should slow the tail rotor, putting it over to the right should speed it up.
how do i stop the heli from spinning around loads when i am about to take off i just started flyin oday and thanks for the website rcairplaneworl it helped me alot!
Practice ;-) Click on my web address to the right of the video box above, and have a look through the pages I've written about setting up the heli. Drifting to the left is normal, you just need to learn to control it before it happens. Keep at it, you'll get there.
How do you get im so stable??
Do you use the trim sticks or are you just a good pilot. I've got this helicopter to and it is a great helicopter!! Thanks
Flyingskill100 3 years ago
thanks because it was flying grate i set it down in a perfect landing went to take it off and no dice just spinning
bbking054 4 years ago
Most likely the tail motor has burned out - a very common issue on helis like these. Before you buy a new motor though, check all the connections to it are OK.
rcairplaneworld 4 years ago
my tail rotor is not working what might the problem be???
bbking054 4 years ago
It can also be that the tail rotor isn't hooked in with the tooth gear.
kennyvanweert 3 years ago
thanks i have fixed this problemb but how do i stop all the virbrations off the helicopter and how do istop it from drifting to the left
thanks foryour help
Beavis162 5 years ago
it keeps spinning round even when the tail motor isnt moving? and do i tighten the main blades to max because at the moment i am using them how they came in the box just lining them up each time i crash? thanks
Beavis162 5 years ago
The tail rotor is there to control the spinning - if you can't stop the heli spinning round then the tail motor might be faulty. Does the tail rotor respond to the stick movements on the trasnmitter ok? Holding the stick over to the left should slow the tail rotor, putting it over to the right should speed it up.
Glad to hear that my pages are helping you ;-)
rcairplaneworld 5 years ago
how do i stop the heli from spinning around loads when i am about to take off i just started flyin oday and thanks for the website rcairplaneworl it helped me alot!
Beavis162 5 years ago
Practice ;-) Click on my web address to the right of the video box above, and have a look through the pages I've written about setting up the heli. Drifting to the left is normal, you just need to learn to control it before it happens. Keep at it, you'll get there.
rcairplaneworld 5 years ago
Man how do you do that? I have the same helicopter but I can't lift off that good. With me it goes to the left and falls down.
KaizokuPim 5 years ago