PMDG Md11 full tutorial part1

[justtheguy27]

@marko071988 How do you find the airways ???

[DaveSull1994]

when i start up my md 11 the screens in the cockpit have black screens with Xs across them ? any help ?

[Youre1Garbage]

Over well you did pretty good, but I saw that you avoided some of the cockpit preparation procedures. Nice video though.

[abdulrahimify]

i have a question how do i set my stabilizers and full lap the computer in the aircraft keep call for it. please tell me how to set it thank you. My email is Abdulrahim1992@live.com

[metalskateboarder965]

ahhhhhhhh im confuzzled

[ItsMinecraftify]

why cant I confirm my Vspd´s??

[MrVal33680]

j'ai une question: comment fait on pour ajuster le "stab trim" dans le eicas comme vous faites à la fin de la video?

[marko071988]

@MrVal33680 Il faut assigner une touche speciale pour le compensateur; et donc aller dans option etc. Ca fait longtemps que je n'ai pas joué donc je ne pourrais pas te dire précisément, mais c'est dans le menu de choix des touches.

[MrVal33680]

@marko071988 Merci beaucoup d'ailleurs j'aimerai te remercier pour l'efficacité de tes tutoriels que j'utilise pour le 747-400 et le md11

[telmenka1]

This is very different than the 747



[FlyUPS767]

Capa380 you need to hit lsk # which says fmc-1 and that will take you to the fmc

[capa380]

everytime i connect the external power thro the FMC it tells me "NOT ALLOWED' can someone please help thank you :)

[cantollie324]

just a question do you always fly with 2d panel

[barti673]

@metalskateboarder965 cuz u have cracked md11 :S

[metalskateboarder965]

My panels are still black

[pilot9159]

but instrument do not light up doh wen i put on battery switch

[ItsMinecraftify]

@pilot9159 ´cause u have cracked md-11

[GreekLegend]

@ItsMinecraftify how the fuck does that answer the question retard?

[ItsMinecraftify]

@GreekLegend It answers ´cause they dont light up and will not light up if you wont buy it you fucking piracy asshole

[pilot9159]

but instrument do not light up doh



[Palestine787]

God, This extremely different from the 747

[bigsparrow1]

The PMDG MD-11 is a nice bird. And the tutorial does it justice.

It can be tough to fly the big iron solo though.

Try something called "Multi Crew Experience" voice control add-on for FSX & FS9, and get the virtual co-pilot to dial speed, altitude and heading flaps and other things for you, and experience the thrill of voice control.

Since a fully working downloadable Demo is available, all you need is a headset with working microphone. :-))

[FsxCaptainLukas]

What flight planner tool do you use to get the airways? I am using FSCommander 9 and I'm not getting any of those.

[TheFlyingLaurens]

I don't get my stabelizer to that position it doesn't activate i did everything you did

[ROTAX129]

How can you get the Correct waypoints for your flight?, with the standard FSX fligfhtplanning tool?

[77777718]

Hi. can you help with a problem. After takeoff i put my flaps up. But then it ignore my joystick throttle, so i can,t control my speed. I dont know why?

[flydynasty006]

@77777718 1. Read the manual 2. Its the auto throttle that has been connected automatically. If you dont want it to automatically connect, press the two white switches under the Autoflight button. This however, is VERY unrealistic. 3. You can disconnect the autothrottle by pressing the switch on the side of the throttle lever. Happy Flying

[77777718]

@flydynasty006 thank you so much :-D



[flydynasty006]

@77777718 Your welcome ;)

[danny3902]

how do i find out the airways

[HKS134]

How do you move the trim on lcd!!!!!at 8:23

[HKS134]

my lcd's wont start up why help plz I did exactly what you did

[HKS134]

how I can set that I start plane from cold and dark? because mine has that its auto started

[fxdesca]

merci pour le tuto, mais comment est ce que tu connais les ways points "SXC etc.", et les données que tu entre dans "airways" ?

[SlaterJordan007]

and why does it keep on saying the Flight Plan is not allowed

[SlaterJordan007]

Wait how did you set the trim to 5. whatever you just used a hotkey didnt you!?

[MassrOmelDonia]

Je me disais bien que il y a une pointe d'accent français legèrement imperceptible dans ton anglais :) confirmé après avoir vu le air france sur ton profil !

Super tutorial dude

Connais tu le forum aeronet par hasard ?? si oui quel est ton pseudo

[jlebesis]

Great tutorial! I have a question though, on mine..the FSX md11, it does not have that button in the main cockpit view under the pnl-flood switch to call up eicas etc. :( Does anyone else have this trouble in the fsx version? Many thanks!

[battisteSPV]

Thanks for this tutorial :)

Do I have to exit the flaps only on TO FLaps SEL ?

Big thanks for this 1st part ;)

[plpl1234able]

I cannot enter the weight. I did everything the same as you did.f

[plpl1234able]

I cannot enter the weight. I did everything the same as you did.

[soarhigh23]

thanks for that tutorial - was helping me a great deal getting my MD-11 airborne for the first time! :)

[xAwsomeSkitx]

marko071988, are you training people in FSX from the cockpit to? I would really appreciate if you could help me out from the cockpit in FSX. pls reply

[Stefan0n9]

@skaterkiviman Get yourself some charts! 

[baaaaaba94]

Nice tutorial man!! goog job! bon boulo

[hongkong57]

could still never get this :( dam

[leonels36]

why i keep pressing v1 vr v2 and nothing happen????? plus the trim?? how to use the trim setup, something is missing on the video

[leonels36]

why i keep pressing v1 vr v2 and nothing happen?????

[leonels36]

this is crazy, the PSS A320 you do the flight plan at the fs2004 and import from data at FMC, this pmdg M11 you have to fill yourself never works, spend hours to figure out how to fill FMC its too complicated, and you loose entuziasm from flying the airplane

[marko071988]

@MMorTTimer It's spelled "dude", not "dood". Anyways, thanks for your precious concern, but I have read the manual. Don't know what you're trying to prove here, but you should keep your big nose off these Md11 videos, being nosey really won't bring you far in life buddy, trust me!!

[madflyer1093]

@marko071988 these are some of the best tutorials on youtube, thanks for the time you have put into them

[kevster3000]

its a damn hard plane! but great!

[florian02091998]

nice video but how to set the battery on

[jorgealfredo71]

Gracias amigo, muy buenos videos explicativos!

[levelat350]

SPECIAL REQUEST:CAN YOU DO AN ATC TUTORIAL ON THIS AIRCRAFT?

[MrMeggi]

I'm wondring I should buy the pmdg md-11, but I have a questions.

my computer spec is : AMD athlon II 4X 620 processor, 3,00 GB RAM, ATI Radeon HD 5700. so. can I use the MD-11 with the scenery on high in FSX. without the FPS goes below 20?

PS. sry for my bad English, hope you understand.

[MrBoeingairbus]

when i press the external power switch there no change and the system doesn't work

[captainSanchez747]

can any one where can i download new textures to pmdg md11 please?

[captainSanchez747]

hi, can you send me the link of the page that you can take the fmc information (waypoints,airways,etc.)?

[sammerftw]

i still don't get where you get the flight pland from?? plz answer

(i mean this PEBLE3 SXC DINTY DUETS R576 DIALO R576 DRAYK R576 DENNS MAGGI3

[greendaylover12345]

@greendaylover12355 Well, now that I send it and look at the post, I guess I answered my own question. -_-

[greendaylover12345]

Why are E, N, S, and W boxed?

[GameNewbie]

hey man, nice vid. Lemme ask, in the Weight Init page when I click in the R1 (block) to auto configure the GW I got a error *not allowed" or something. I repeated a lot of times and I never can set the GW automatically, any tips? Thanks!

[MASfleet]

@GameNewbie u should right on the ZFW then left click it again! hope it helps

[oggybodoggy]

I know I have to configure a key to configure the stabilizer, but what is the name of the key thingy I have to set?

[progress4]

You can input your flight plan much easier. All you have to do i type in first waypoint and then airways only, FMC will add all intersection for you. It takes less time and you know that your route is up to date if you have current airac installed.

Other thing. You should set V2 at MCP, why? It is at which speed, following an engine failure at V1, the aircraft must be capable of climbing and retracting the gear.

[Maxpilot777]

You made flying this plane so easy.

[Pilotbrate6435]

@luislaurencio just delete space between ht tp that's all...sorry for my... english i use google translator :P

[aviationfreck]

i can 't get the gauges started up ( i use a crack of the pmdg Md-11 pleade help me 

[lucasguillen]

@aviationfreck buy the damn thing your noob

[luislaurencio]

@aviationfreck go ask on google but please dont say that u have a crack because they wont help you

[adrianskolka]

how can i change the trim at the confguration at the end of the video?

[oggybodoggy]

@adrianskolka Have you found out yet? If you do please share

[adrianskolka]

@oggybodoggy well on the throttles, there is on the left side a pretty intresting thing which u can move up and down, this is to move the stabolizor

[oggybodoggy]

@adrianskolka Thanks, I also found out that to move the stabilizer you could just hold in num 1 or num 7 with default settings :D

[Roquefortify]

I didn't like how you said FMC, sounded like you have lip lisp.

[Pilotbrate6435]

listen dude,you don't do that how need!!!Ok?see what you need to do....ht tp://w ww.youtube.com/watch?v=932wwGv­xG4I

[luislaurencio]

@Pilotbrate6435 what the name of the video ,,the link you put is wrong

[MacExpert]

lets say wind is 030 at 08 how would i enter that? im getting some format error, and out of range error

[winsun96]

hi marco,

i need help... when i try to fly the tutorial flight that comes with this plane... it tells me that i have to load the tutorial1 panel and then turn on the IRS... but when i do that, my systems remain black and i cant see anything... even the MCDU is black and i cant do anything

please help,

winsun

[FlyTraffic]

You can insert the first waypoint ,klick on airway and then insert the airways and the waypoints so you dont have to do so much work. But nice tut.

[mamn15]

dude i seriously need help with the autopilot... wherez the lnav and vnav?? and the nav hold buttons??

[marko071988]

@mamn15 I'm guessing you didn't watch the tutorial. There's no LNAV or VNAV, just NAV (kind of like LNAV) and PROF(profile, kind of like VNAV)

[mamn15]

@marko071988 im sorry... dude but i dont understand the route page..its just super huge...and bery confusing!!

[marko071988]

@mamn15 Well you need to have your flight plan ready. The enter the waypoints, then the airways, and the SID and STAR.

[mrLundby]

@marko071988 Do you have any webpages and so on to find all these specific information? :).. It's actually what keeps me from flying this bird, because I don't know where to find any useable information. Thanks anyways - very nice tutorial :)

[SlaterJordan007]

@marko071988 

[Beech165]

@mamn15 How do i pop up the EEFIS.?

[mamn15]

@Beech165 just click on it and it should pop up...

[walawalawingding]

stab-uh-lie-zer lol this is really comlicated

[mika2710]

Hi there, recently, the IRS is not working well:

I initialize it at the begenning in the FMC but after all the work, it says "align IRS" and i can t align it anymore...

So after i take off, the plane cannot flight ...

Can you help me please?

[marko071988]

@mika2710 Did you turn the switches to NAV, and then enter destination and departure airport, and then click on initialiez IRS?

[Flyglobespan93]

Nice tutorial Marko! 5/5*. Q-HOw did u get the FMS to enter the data manually at 1:26,cause with me i have to enter it all manually. ?

[marko071988]

You just need to click on the line select key like I did.

[Flyglobespan93]

@marko071988 I tried that but it only calculate the Block but you had the ZFWCG andZFW calculated

[marko071988]

That's odd, it should work...

[Flyglobespan93]

@marko071988 Its ok,alll i need to do is right click each one and it give me the data

[marko071988]

@Flyglobespan93 Normally a left click should do the trick

[mathmagic123]

when I takeoff, the throttle gets stuck at either idle or full, and the autothrottle isn't on. What am i doing wrong?

[marko071988]

Well normally you just arm the AT, and when the you push the thrust levers over 40% N1 (I think), the AT turns on by itself. But this doesn't explain your problem... Try doing the whole thing again.

[Bart9494]

how do you enter the trim setting

[marko071988]

You need to configure a key for that.

[oherregud]

This is hard, i cant gett my black screens to work OR my fmc, and i just bought this shit,.

[marko071988]

Try reinstalling, it sometimes works.

[Flyglobespan93]

@oherregud If it was not a pirate copy rhen got to Peter Dowsons webpage and download the latest FSUIPC for FS,it is 3.98(i thin im not sure).It does not have to be registered

[nick7728]

I "acquired" this plane but i cannot install any liveries, please help.

[marko071988]

What happens when you try do to so?

[nick7728]

i lose my FSX texture file

[marko071988]

Hum... never got that. Send a message to PMDG.

[oggybodoggy]

@nick7728 haha, that's because you downloaded it, and when you update it and it detects that it isn't valid they fuck up your FSX folder root

[Flyglobespan93]

@nick7728 If its just u cant see them run FS as administrator and that should fix ure problem

[oherregud]

I cant push my buttons! Is there like some patch or something you need to download? Nice video.

[marko071988]

Is it from a torrent?

[loploro]

TA/RA ON only when entering the runway.

[marko071988]

Didn't know that!

[TheGlobalflight]

Why dont you just enter all the airways in one, just continue on via (airway) again and to fix and via (airway) and so on....

[marko071988]

Because I hadn't flown this plane a lot, but you are absolutely right, it makes way more sense to do that.

[luv2phuk]

Marko knows everything about fsx plane.

[marko071988]

Ahah, maybe not EVERYTHING;)

[attilagregory]

Man .. why you did not put the ZOOM in fmc ??

Tutorial would be perfect!!!

[marko071988]

what?

[pogodapogoda]

Just view it in HD. Everything can be seen perfectly. 5 *

[arthurmee]

Gotta hand it you Mark, you have provided a great set of start up tutorials for FS beginners. Well done and thanks!

[ekanshfan]

Hey thakns for the great tutorial ***** ... just wanted to ask that when i am climbing whith this bird .... i get a warning cabin altitude ..and some fans ovrd ..somethin like that . ..n also my speed keeps decreasing even if i climb manualy like with the vertical speed ..please do help thanks !

[nikolasdominguesduis]

what button do you use for trim?

[AmericanFrenchM]

You need to configure a kkey in fs

[anteroa330]

helo man, i have a problem my MD-11 PMDG not have a complete overhead......but he is oficial ....

so you cold help me? sorry but my inglish is bad i'm from Brasil.....tanks

[marko071988]

Ask PMDG's customer service, I don't know anything to solve the product's problems.

[anteroa330]

but have somo config before the fligth? = A the b737 wilco in this aircraft you need config in wilco publishing.....

[marko071988]

what??

[anteroa330]

tanks i find the error......but now i turn bateri on,emergenci power,emergenci ligths and external foce but my efis stay cold and dark....it problem in my aircraft??

[Pvjinflight]

And it says not allowed also when im trying to select zero fuel weight...

[marko071988]

Torrent?

[Pvjinflight]

No, its legal. But i will try it again, maybe it will work then...

[marko071988]

Hum... yeah try again, i can't really help you, sorry.

[Pvjinflight]

When i select Initialize IRS, it says  Not Allowed...

[marko071988]

Weird...

[peddet]

Little help please :(

When i have turn on the batteries and everything, my screens will not work, do you know why?

[marko071988]

Nope I don't... did you get it from a torrent?

[peddet]

Nope, i bought it recently.

[marko071988]

Try reinstalling and if it doesn't work, contact PMDG.

[anush10]

cause you torrented it and didn't follow the directions

[JGthenumberone]

hey there is one more question i would like to ask? ok so i am filing a flight from klax to klas and the route is loop4 dag porte3 so i know the first one is a sid and the last one is a star but when i input the route do i just enter dag and then do the sids and stars?

[marko071988]

Yes, and delete the route discontinuity lines.

[JGthenumberone]

ok thanks!

[JGthenumberone]

hey how do you know what the wind is and what the temp is???

[marko071988]

Listen to the ATIS info

[JGthenumberone]

oh..

[JGthenumberone]

w8 i did that but what is the thing where u input something/something

[owner0007]

hey marko071988,

using the FMC is way nicer using the "KRD" button which allows you to tip by ur keyboard the necessery data (;

AT 0:50 ... nice tut thank you... happy landings

[marko071988]

I didn't know that! Thanks!

[owner0007]

no problem... we PMDG users are on familie lol

I bought the pmdg 5 days ago...

im reading all give information and fly on my left screen and listen to your downloaded HD Tutorial on my right screen..

(;

[parkboom27]

hi sir...i just want to ask if when i press the shit+2 panel will appear to me but the panel is only blank? its like no power but the plane is already turn on...pls sir help me in my problem.

[marko071988]

Did you try reinstalling or contacting PMDG?

[JeffMc]

It's because you downloaded it illegally.

[tmlmike]

The brightness setting for the panel screens are controlled by the scroll wheel on your mouse. Try that.

[FlyinRyanProductions]

this has to be the most realistic payware plane that i have ever owned not bought lol it is pirated aha

[trainmanlars]

me too mate. $79.99 is waay to expensive!

[FlyinRyanProductions]

yea i agree i looked on the website prior to instillation and i almost fell off my chair great aircraft though. the pirate bay is my best friend

[MORRIS153]

I did all of the steps to get the display up, but it dosn't work. :(

[marko071988]

Either you did something wrong, or your software is fucked up. Did you buy it??

[dukee155]

yo when i turn on the battery and nav the fmc doesnt go on can you help me

[marko071988]

Did you put STBY power on auto?

[dukee155]

ys i turned on the emergency power on the external power and gly power

[marko071988]

I don't know then... try doing the whole thing again.

[dukee155]

maybe reinstalling will help

[marko071988]

I guess so. It's hard for me to know wether it's a bug or if you're doing something wrong...

[dukee155]

okay well another thing is what does it mean when it says abs dissabled because i know a plane does not have anti lock brakeing systems

[marko071988]

It's Auto Brake System.

[blackdog0301]

It's called Altimeter in Canada, not QNH. Great video!