@DJelectfire OH sorry, it used to be omen reprise and then youtube changed it for me :/. I dont know the name of this one sorry, its one of youtubes audioswap options but i cant seem to find the name.
I tried making something similar to this, but only using 2 mirrors, and it doesn't work very well. Do the Mirrors need to spin in opposite direction, or at a certain speed?
my mirrors all spin in the same direction, and then i varied the speeds to get different patterns. when starting it up i first do 1 mirror, which makes a circle, then use a second mirror and it makes the standard spirograph shapes, and then the 3rd seems to make these move in strange ways, like the growing and contracting circle.
i think the speed itself isn't important, its the ratio between speeds on the mirrors, although they all need to keep the persistence of vision speed
thx, that helps alot, but i have run into another problem. The PC fans i got says 12V on their label, and i dont have/know where to get 12V battery's. What kind of battery's did you use, and does it need to be 12V?
for the purposes of this video, i actually over volted the fans, which will damage them. Batteries struggle to supply the current needed for 3 fans too.
I'm now using a PC power supply as a desk power supply. All you do is connect the green wire to ground to make it turn on, and then use the connections for the motherboard / hard drives. Just get any spare one, they're cheap as chips if you don't have one.
I happen to have a broken computer, and i took the power supply out, the only problem is that is has only black, red, white, blue, orange, brown,purple,yellow, and grey wires, so i dont know how to start it up (you said green-ground starts is up). Also, on the power supply case it says for output it has 3 outputs 50V at 18A, 1 output 5V at 10 amps, and 1 output 12V at 4 amps, do you know which one is best to use?
at the end of my video, when there is a shot of the 3 mirrors in action, you can see the image the 2nd mirror is making being projected onto the 3rd mirror.
it shouldn't matter, the point is that they split the current. the only thing that matters is the ratio between the 2 sides. the fan is connected in the middle, and high and low to either end.
the angle does not have to be a specific angle, i put 3 layers of some thick tape under 1 side of the mirror, then stuck it down, this must have made it tilt about 1 or 2 degrees
hi i looked this video I liked the scheme can give DIY Laser Show
please or site where the scheme took
ZHENEK0203 1 month ago
This has been flagged as spam show
puedes mandarme el esquema de como hacerlo ami correo samir_reyes@hotmail.com
samirx33 10 months ago
This has been flagged as spam show
puedes mandarme fotos de como hacerlo ami correo samir_reyes@hotmail.com
te lo agradeseria
samirx33 10 months ago
what is the name of the song?
DJelectfire 1 year ago
@DJelectfire omen reprise - prodigy :)
Splooshiba 1 year ago
@Splooshiba thanks!
DJelectfire 1 year ago
@Splooshiba I just checked- Is it a remix? cause the original doesnt match this one...
DJelectfire 1 year ago
@DJelectfire OH sorry, it used to be omen reprise and then youtube changed it for me :/. I dont know the name of this one sorry, its one of youtubes audioswap options but i cant seem to find the name.
Splooshiba 1 year ago
@Splooshiba Nope DC brush-less fans don't work that way. they have diodes in them that prevent reverse currents.
FireFoxConn 1 year ago
love the laser and the song- what is the song btw?
electfire 1 year ago
- @Splooshiba -
I suppose it would depend on the motor. Most brushless fans don't work that way though.
pmgodfrey 1 year ago
I tried making something similar to this, but only using 2 mirrors, and it doesn't work very well. Do the Mirrors need to spin in opposite direction, or at a certain speed?
Nice Vid btw
zzsseeffvv 2 years ago
my mirrors all spin in the same direction, and then i varied the speeds to get different patterns. when starting it up i first do 1 mirror, which makes a circle, then use a second mirror and it makes the standard spirograph shapes, and then the 3rd seems to make these move in strange ways, like the growing and contracting circle.
i think the speed itself isn't important, its the ratio between speeds on the mirrors, although they all need to keep the persistence of vision speed
Splooshiba 2 years ago
thx, that helps alot, but i have run into another problem. The PC fans i got says 12V on their label, and i dont have/know where to get 12V battery's. What kind of battery's did you use, and does it need to be 12V?
zzsseeffvv 2 years ago
for the purposes of this video, i actually over volted the fans, which will damage them. Batteries struggle to supply the current needed for 3 fans too.
I'm now using a PC power supply as a desk power supply. All you do is connect the green wire to ground to make it turn on, and then use the connections for the motherboard / hard drives. Just get any spare one, they're cheap as chips if you don't have one.
Splooshiba 2 years ago
I happen to have a broken computer, and i took the power supply out, the only problem is that is has only black, red, white, blue, orange, brown,purple,yellow, and grey wires, so i dont know how to start it up (you said green-ground starts is up). Also, on the power supply case it says for output it has 3 outputs 50V at 18A, 1 output 5V at 10 amps, and 1 output 12V at 4 amps, do you know which one is best to use?
Thanks
zzsseeffvv 2 years ago
il PM you, comment character limit is getting annoying.
Splooshiba 2 years ago
at the end of my video, when there is a shot of the 3 mirrors in action, you can see the image the 2nd mirror is making being projected onto the 3rd mirror.
Splooshiba 2 years ago
how many ohms are the potenciometers??100kohm or more?
djvanbeat 2 years ago
it shouldn't matter, the point is that they split the current. the only thing that matters is the ratio between the 2 sides. the fan is connected in the middle, and high and low to either end.
Splooshiba 2 years ago
sorry, they split the voltage*
Splooshiba 2 years ago
is that all mounted on a tupperware container?
very nice
laserpyro 2 years ago
indeed it is :P
its mounted on the lid, i cut a hole in the side of the Tupperware case so the laser can shine out, and then its all one contained unit
Splooshiba 2 years ago
what is the mirror angle?
recordmasta001 2 years ago
the angle does not have to be a specific angle, i put 3 layers of some thick tape under 1 side of the mirror, then stuck it down, this must have made it tilt about 1 or 2 degrees
Splooshiba 2 years ago
how much is the angle?
fdavpach 2 years ago