The same with a sound recording, as soon as the signal on both channels are equal the brain sees it as MONO, that's way Binaural is flat on the front area of the head. None time and amplitude differences, between ears, only give you a mono sensation.
Holophonics tm,mimics the anomalies between channels, engineered on billions of years of evolution, on MAN.
No microphone or Head has resolved the problem of such anomalies , because acousticians know SOUND as I know how to castrate MONKEYS, LOL
Tell me if I'm wrong my friend. The same sound heard by the left ear will sound different frequency at the right ear. An example of what I mean. Take a low frequency wave and a high one and compaire them both together. The high frequency has to be in a small area of the low one. Ok try 2 hoops of different size. the small hoop only fills a small area of the large hoop.This is my theory on direction on sound. Each ear hears it differently ?Just like angles, each wave has two direction jobs(depth)
The task of the Holophonics Tm speaker is to reproduce the signal without distortions, The holophonics Tm effect is a consequence of interpreting the codes inbred on the signal.
therefore the effect will be heard as far as the signal maintain integrity.
As you can see or hear on this video , the signal is pretty good at several hundred yards.
Enough to fill a mega concert with Holophonics Tm effects.
I have been experimenting with sound from my computer on to my stereo. I have managed to tune each frequency to sound like another frequency that it's not by arrival times. I have put a book between the speaker and me and it seems to sound the same. It don't matter what angle I listen from, it still sounds the same. My system isn't phase linear enough to relate properly but making the frequecys simular, made the differences the same so it can be heard simular. I mean the way vs the tone.
It's as if I tuned the distances together by altering the frequency and correcting it with the same frequency again but at the original frequency between them. Just like they are on the same level. I did a long time ago acheive full 3d sound from 2 speakers by adjusting an equalizer. I had an amazing transaural phantom image. Is there a way to simulate the effects on speakers with not very good equipment and using software ?
If there is not info, on the recording , any further manipulation , will not do.
Think how far you can twitch the controls of a black and withe monitor , to see in color???
If you think about it both monitors are sending your eyes, all the colors of the spectrum, except that the information , is scrambled differently.( I imagine you KNOW that withe is composed by all the colors).
Yes if it wasn't on the recording, it definately can't be there but I allways thought of it one way. We have 2 ears and 2 mics in recording. Some allways talk about crosstalk ruining the image. when recording, the left mic hears the sound shortly after the right mic does(vicaversa) but at a different time or (frequency) depending on the way the sound arrives. During playback the frequencys and arrivals are altered through crosstalk The sound is in 3d (stereo pictures are 2) but it's not in focus
I managed with an old system to alter the way of arrival to sound in focus to my ears. imagine you move something but you want it to sound from a different place than the speaker is in. I adjusted and acheived a crosstalk effect which ressembled the original frequencys at each ear. I could move to one side of both speakers and it would follow me as if I was the center. To achieve this I made different frequency levels arive to simulate a different tone on crosstalk but still in relavance.
Does it sound like it's full 3d at that distance. I remember hearing something possibly holophonic on speakers and it was truely amazing. Dear Hugo, What is the maxium distance that holophonics work if you read this. comment. Thanks
great job! i would love to fund your research!
MyNameisRichGreen 11 months ago
@MyNameisRichGreen I will be pleased to talk to you.
We can connect at zuccarelli@yahoo.com
Thanks.
hzuccarelli1 11 months ago
jaja mato las chicas preguntnado para que filmaba jajaja nose si se habran preocupado o que jajaj un abrazo hugo genial el trabajo en the final cut
joeykurt75 1 year ago
hugo orgullo me da esto.
panuelo87 1 year ago
As a genius you should make Holophonic speakers, headphones and recordings available to the world!
Also, what are your views on Psychic Tv's DREAMS LESS SWEET album? A very good example of holophonics?
Maybe you would do a video about that!
Greetings from Ireland!
AZUREGLIDE 2 years ago
@AZUREGLIDE I wish I could find the way to get my techs out!!!
We are looking for good people to help us, just to do that.
hzuccarelli1 11 months ago
Too bad, sorry!
chisatsu97 2 years ago
Que grande Zucarelli! por favor siga compartiendo mas sonidos holophonicos con nosotros, yo los tengo casi a todos.
matvalenzuela 2 years ago
The same with a sound recording, as soon as the signal on both channels are equal the brain sees it as MONO, that's way Binaural is flat on the front area of the head. None time and amplitude differences, between ears, only give you a mono sensation.
Holophonics tm,mimics the anomalies between channels, engineered on billions of years of evolution, on MAN.
No microphone or Head has resolved the problem of such anomalies , because acousticians know SOUND as I know how to castrate MONKEYS, LOL
hzuccarelli 2 years ago
Tell me if I'm wrong my friend. The same sound heard by the left ear will sound different frequency at the right ear. An example of what I mean. Take a low frequency wave and a high one and compaire them both together. The high frequency has to be in a small area of the low one. Ok try 2 hoops of different size. the small hoop only fills a small area of the large hoop.This is my theory on direction on sound. Each ear hears it differently ?Just like angles, each wave has two direction jobs(depth)
benjyboba 2 years ago
The task of the Holophonics Tm speaker is to reproduce the signal without distortions, The holophonics Tm effect is a consequence of interpreting the codes inbred on the signal.
therefore the effect will be heard as far as the signal maintain integrity.
As you can see or hear on this video , the signal is pretty good at several hundred yards.
Enough to fill a mega concert with Holophonics Tm effects.
Cheers and thanks , Hugo.
hzuccarelli 3 years ago
I have been experimenting with sound from my computer on to my stereo. I have managed to tune each frequency to sound like another frequency that it's not by arrival times. I have put a book between the speaker and me and it seems to sound the same. It don't matter what angle I listen from, it still sounds the same. My system isn't phase linear enough to relate properly but making the frequecys simular, made the differences the same so it can be heard simular. I mean the way vs the tone.
benjyboba 2 years ago
It's as if I tuned the distances together by altering the frequency and correcting it with the same frequency again but at the original frequency between them. Just like they are on the same level. I did a long time ago acheive full 3d sound from 2 speakers by adjusting an equalizer. I had an amazing transaural phantom image. Is there a way to simulate the effects on speakers with not very good equipment and using software ?
benjyboba 2 years ago
Sorry you cannot put the crap back in the horse.
If there is not info, on the recording , any further manipulation , will not do.
Think how far you can twitch the controls of a black and withe monitor , to see in color???
If you think about it both monitors are sending your eyes, all the colors of the spectrum, except that the information , is scrambled differently.( I imagine you KNOW that withe is composed by all the colors).
hzuccarelli 2 years ago
Yes if it wasn't on the recording, it definately can't be there but I allways thought of it one way. We have 2 ears and 2 mics in recording. Some allways talk about crosstalk ruining the image. when recording, the left mic hears the sound shortly after the right mic does(vicaversa) but at a different time or (frequency) depending on the way the sound arrives. During playback the frequencys and arrivals are altered through crosstalk The sound is in 3d (stereo pictures are 2) but it's not in focus
benjyboba 2 years ago
I managed with an old system to alter the way of arrival to sound in focus to my ears. imagine you move something but you want it to sound from a different place than the speaker is in. I adjusted and acheived a crosstalk effect which ressembled the original frequencys at each ear. I could move to one side of both speakers and it would follow me as if I was the center. To achieve this I made different frequency levels arive to simulate a different tone on crosstalk but still in relavance.
benjyboba 2 years ago
Does it sound like it's full 3d at that distance. I remember hearing something possibly holophonic on speakers and it was truely amazing. Dear Hugo, What is the maxium distance that holophonics work if you read this. comment. Thanks
benjyboba 3 years ago
really successful!
egegural 3 years ago