I did this with two 4x4 plates stacked 1/2 inch above each other hopeing the lower cell would excite the upper cell, looking in it created a neat draft where the lower cell was being pulled up into the top cell I called it the doubble pumper,it works pretty good,have fun,Dom.
Well you would be wrong..This perticular cell design that I call and S-Cell does not over heat and uses very little water, like in the last 1300 miles in my 96 Dodge Grand Caravan I have a 31 percent increase of miles per gallon and have only put distilled water in it once....I don't understand why it works so well and I dont care. It only uses 5 Volts and not many amps, it never gets hot and barely ever warm and I take trips of up to 2 hours long. I know there is something not understood here.
NOW the trick is to get the same effect using pure distilled water so you have a pure HHO output.. I'm sure it's not pure if you have chlorine and baking soda and everything else in there.. =)
Ok, I just got done doing a very cheezy amp test 15amp fuse stayed good. It is 5 volt 15 amp draw straight DC with 4 table spoons of baking soda and a half gallon + or -.
I let it run 8 hours last night and without a thermometer it was less than Luke warm! I am very impressed with this experiment and feel that I am onto something.
I would like some more test to try if any one can suggest something. I am going to do a cheap output test without vacuum tonight and will post tomarrow. Now this was two of what I am going to calls, I have 4 built and am going to see if I get more output without heat buildup and post as well..Thanks and sorry for the lack of info, I was at work uploading and could not do much more
What controls the amount of hydrogen produced. I heard that if the voltage is kept below 2v, the electrolyte molecules will not break apart.
Is the output controlled by the amp consumption? If so, how to you raise the amps?
capitalist4life 3 years ago
I did this with two 4x4 plates stacked 1/2 inch above each other hopeing the lower cell would excite the upper cell, looking in it created a neat draft where the lower cell was being pulled up into the top cell I called it the doubble pumper,it works pretty good,have fun,Dom.
Hollywoods7 2 years ago
way too much current dude
djahriman 3 years ago
i know this video is alittle old now, but can I ask what was the size of mesh you used?
tekkenm2000 3 years ago
I gotta try this, I've been using nichrome wire. That seems to work well. Ill bet a grid is even better.
cribcat1 3 years ago
great production bu i bet the amps are high as well and your water or baking soda as reached maximum temp not very effecient more energy in than out
theoneagain 3 years ago
Well you would be wrong..This perticular cell design that I call and S-Cell does not over heat and uses very little water, like in the last 1300 miles in my 96 Dodge Grand Caravan I have a 31 percent increase of miles per gallon and have only put distilled water in it once....I don't understand why it works so well and I dont care. It only uses 5 Volts and not many amps, it never gets hot and barely ever warm and I take trips of up to 2 hours long. I know there is something not understood here.
CSIROCKSUS 3 years ago
NOW the trick is to get the same effect using pure distilled water so you have a pure HHO output.. I'm sure it's not pure if you have chlorine and baking soda and everything else in there.. =)
Great work so far!! =)
klexn 4 years ago
Great work!
Can you show us how you made those plates? What
is in them? This is really neat data, please
just give us more info...
Thanks!
pikespeakhho 4 years ago
My latest video shaows how I made them and what I used and out put into bubbler...Thanks
CSIROCKSUS 4 years ago
Nice work CSIROCKSUS!
Where did you get the SS grill? thks
Casper886 4 years ago
what did you use for your plates? how are they put togeather?
cjhindma 4 years ago
My latest video shaows how I made them and what I used and out put into bubbler...Thanks
CSIROCKSUS 4 years ago
Looks interesting, but more data please! Whats the idea? Amps? electrolyte? pulsed or straight dc? gas production volume?
oystla 4 years ago
Ok, I just got done doing a very cheezy amp test 15amp fuse stayed good. It is 5 volt 15 amp draw straight DC with 4 table spoons of baking soda and a half gallon + or -.
CSIROCKSUS 4 years ago
I let it run 8 hours last night and without a thermometer it was less than Luke warm! I am very impressed with this experiment and feel that I am onto something.
CSIROCKSUS 4 years ago
I would like some more test to try if any one can suggest something. I am going to do a cheap output test without vacuum tonight and will post tomarrow. Now this was two of what I am going to calls, I have 4 built and am going to see if I get more output without heat buildup and post as well..Thanks and sorry for the lack of info, I was at work uploading and could not do much more
CSIROCKSUS 4 years ago
My latest video shaows how I made them and what I used and out put into bubbler...Thanks
CSIROCKSUS 4 years ago