yeh, it is good but if the batterie discharge at 7 volt? there won't be enought energie to charge normally... but i really likes your tutorial... if you want, plz see my video... it is electronic
@SuperGM98 yes it will work, it outputs five volts and just bout any new device charges off of five volts, i have asimilar setup, just a lil more complex and it works on my 3000 and my 1000 cept i made mine just for psp's
@SuperDmc92 why not just use a t805 five volt regulator from radio shack? and to capacitors between 100-1000 uf to keep the regulator from getting warm, i have never heard of a zener diode, i like urs but i also like mine XD i made mine for psp, but i changed it into a usb after i found me female usb end lol
Wall chargers are fucking shit. I'v been through 12 in the last year. Today my latest one broken. They only last for like 20 chargers before randomly deciding to stop working. I'm sticking with charging it on my computer!
@bestgoalie95 No this configuration doesn' t work at all with the ipod touch and iphone, because apple made a security or a trick to ablige buy a special charger from apple for ipod touch and iphone. For the charger works, you must add 4 resistor to make 2 voltage divider which they give a signal for the data pin of the usb to activate the ipod touch's charging. I made a 9v charger, and i will post a video about my charger, and of course the schematics for understand the functioning & make it!
@shortyjk95 Most phones/electronics charge at 3-6 volts, and so the diode only lets a certain amount of voltage through. The battery wouldnt charge properly at any other voltage.
It's a zener diode... zener diode do the work without problem. Wikipédia : Zener diodes are widely used as voltage references and as shunt regulators to regulate the voltage across small circuits.
Awfull music. Everything (picture) out of focus !!!
clarification007 3 weeks ago
god this song is everywhere! XD even let the bodies hit the floor
sasukejoshua 1 month ago
Thanks this video really helped me
darianmattadeen 1 month ago
Can i charge this battery on computer usb..?????
KaleemNiz 2 months ago
Heard the song, got upset, clicked on another video >.<
Moongazer980 2 months ago
Can you fully charge a smartphone with one 9V battery?
jvpernis1 2 months ago
mute button.....we meet again.
NCWC916 3 months ago 9
@NCWC916 nuh uh!! this is a good song!!!! :D
gojohnson48 2 months ago
i would suggest to put the 5v or 4.7v zener in parallel and make some resistor to protect the zener... i think so.. O.o
gemimile 3 months ago
yeh, it is good but if the batterie discharge at 7 volt? there won't be enought energie to charge normally... but i really likes your tutorial... if you want, plz see my video... it is electronic
tousisat1 4 months ago
You can find cheapo supplies at jameco.com
Or radioshack but they are much more expensive.
ProfessorTortoise 4 months ago
Ok i have everything but i dont have a solder. Can i use an other thing instead of a solder?
MrVegaman13 4 months ago
name of the song please
odysseas71 4 months ago
@odysseas71 Evanescence - Bring me back to life
Xtrell 3 months ago
i want ask something...where can i get the 5v zener diode???
n this work on psp 2000 (slim)
SuperGM98 5 months ago
@SuperGM98 yes it will work, it outputs five volts and just bout any new device charges off of five volts, i have asimilar setup, just a lil more complex and it works on my 3000 and my 1000 cept i made mine just for psp's
JusXstaR 4 months ago
@JusXstaR hey how can i find the diode zener 5.0 n resistor???plzz replay
SuperGM98 4 months ago
@SuperGM98 i get all my parts at radioshack,
JusXstaR 3 months ago
Comment removed
SuperGM98 5 months ago
Mute Button We Meet Again Add Real Music =3
ryoncooleo 5 months ago
Comment removed
ryoncooleo 5 months ago
was that a zeiner or blocking diode? looked like a 1N4001
carr869 5 months ago
is 9V not to high? I tought it must be 3.6V?
sonofpikaia 5 months ago
@sonofpikaia that's why there is the 5v zener diode
SuperDmc92 5 months ago
@SuperDmc92 why not just use a t805 five volt regulator from radio shack? and to capacitors between 100-1000 uf to keep the regulator from getting warm, i have never heard of a zener diode, i like urs but i also like mine XD i made mine for psp, but i changed it into a usb after i found me female usb end lol
JusXstaR 4 months ago
Wall chargers are fucking shit. I'v been through 12 in the last year. Today my latest one broken. They only last for like 20 chargers before randomly deciding to stop working. I'm sticking with charging it on my computer!
chelseaforever10 7 months ago
thumbs up higly for the music.
ashwinlit 8 months ago
U need a 330 ohm resistor and a 5.1v zener diode to do the charger thing and off course female usb and 9v connector
MegaMonstter 8 months ago
female usb?
TheUndertaker1850 8 months ago
does it work on iphone too?
ProtocolsMaster 9 months ago
Yo would this work with an ipod touch and is there a way to add a switch
bestgoalie95 9 months ago
@bestgoalie95 not sure .. mybe
yes you can add a switch
SuperDmc92 8 months ago
@bestgoalie95 No this configuration doesn' t work at all with the ipod touch and iphone, because apple made a security or a trick to ablige buy a special charger from apple for ipod touch and iphone. For the charger works, you must add 4 resistor to make 2 voltage divider which they give a signal for the data pin of the usb to activate the ipod touch's charging. I made a 9v charger, and i will post a video about my charger, and of course the schematics for understand the functioning & make it!
bigoud55800 8 months ago
@bestgoalie95 iPods generally use a lot more energy than a regular phone so probably, but you wouldn't get much of a charge
fox10169 6 months ago
@jayholley123 thank you I don't know y but I just love this somg
TheLegoipod 9 months ago
greate ...simple to understand...
thanks
ecigarroaki 11 months ago
What's this song?????
TheLegoipod 1 year ago
@TheLegoipod Bring Me To Life
jayholley123 9 months ago
evanescence bring me to life :D
davidXGX 6 months ago
ok anyone plz answer my question... what does the diode do? Doesn't it only let the power travel one way and resit some current?????
shortyjk95 1 year ago
@shortyjk95 Most phones/electronics charge at 3-6 volts, and so the diode only lets a certain amount of voltage through. The battery wouldnt charge properly at any other voltage.
wowflix1 1 year ago
the music is sooooo annyoing
TALK IN THE VIDEO
BROADCAST YOURSELF, not blury photos of your desk
TheWildKiwi 1 year ago
put a 330R resistor, to drop voltage to 5v, diode is here to not allow current to flow from a device battery to your battery
FODKV 1 year ago
thank you for making the only video out there without extra stuff that you don't really need and over complicated circuit board.
8787cole 1 year ago
man....that diode wont change 9v into 5v it only decrease 0,50 w man get a transistor not a diode ok?
SuperHackboy 1 year ago
@SuperHackboy no actually a voltage regulator
TamaN47 1 year ago
@SuperHackboy
It's a zener diode... zener diode do the work without problem. Wikipédia : Zener diodes are widely used as voltage references and as shunt regulators to regulate the voltage across small circuits.
madshiva 11 months ago
1 question.. if the battery is finished.. how can i change the battery??
keyday93 1 year ago
@keyday93 remove the screws from the cover
and put a new battery
SuperDmc92 1 year ago 3