Not only a nice layout but very good quality video. It's tiring trying to find model railroad videos consisting of more than one or two pixels recorded by someone having a seizure.
Do you know if this decoder works on DC>analog? I have had few factory equipped QSI locomotives, but I am not sure if they are the same as this decoder? Does the Revolution have the voice over programming for analog? I have too small a layout to bother with DCC expense, but I do want to equip my kitbashed atlas s4 with sound. So far I was stuck with maybe a MRC decoder which I know is inferior to these.
i notice the sound seems a bit high, if i reduced the volume from factory default 127 (from q2 upgrade) to 100 or 90, would that make the sound better, or do i need to use high bass speakers? overall...very nice video.
Sorry for my poor english. I having two questions to you. Where did you put the speaker inside the loco shell. Used the same speaker that comes with the QSI revolution or you put a different smaller?
@generalgp76 I used a 1 1/4 inch rectangular speaker and placed it face down in the cab, after taking out the interior detail. The inside of the cab acts as the speaker baffle
@JonGrant4472 thanks for the notes. I also have a Alco s1, (2 of them)with a MRC sound unit. I was able to keep the interiors and placed the speaker where the fuel tank was. If you search my vids I have a quick clip of one on my layout. They are great little switchers
@Lmackattack I used a 1 1/4 inch rectangular speaker and placed it face down in the cab, after taking out the interior detail. The inside of the cab acts as the speaker baffle
Agreed. I spotted the error shortly after sticking the film on here and have turned the turbo sound down to zero on the QSI Revolution decoder - the right sound is on my clip of the NYC Alco S1
I found out that the S1 and S3 were not turbocharged. I also found out how to turn the turbo sound off - both after this video was shot and have now corrected the error
Outstanding!!! You have just raise the bar about 10 noches for all of us trying to make decent model train videos. That was great!!! I enjoyed every minute of it! That was so real. One of (if not the) best on utube!
I have watched many of your videos, but this is the first time I am comenting on it. The detail on your layout and the perspective shots are perfect. Really fine modeling. Very impressed by the work you have done.
Not only a nice layout but very good quality video. It's tiring trying to find model railroad videos consisting of more than one or two pixels recorded by someone having a seizure.
olmecbones 1 month ago
@olmecbones Thanks for the kind words, mate
JonGrant4472 1 month ago
Comment removed
olmecbones 1 month ago
That is the mostrealistic model railroad I have eve seen, really a great job Jon. Thanks for posting the video. Pete
PeteM234 1 month ago
@PeteM234 Thanks mate, too kind
JonGrant4472 1 month ago
@PeteM234 I second that! By far the most realistic scene i've come across.
ocdaddvids 1 month ago
Do you know if this decoder works on DC>analog? I have had few factory equipped QSI locomotives, but I am not sure if they are the same as this decoder? Does the Revolution have the voice over programming for analog? I have too small a layout to bother with DCC expense, but I do want to equip my kitbashed atlas s4 with sound. So far I was stuck with maybe a MRC decoder which I know is inferior to these.
ghfakar 5 months ago
@ghfakar I think there is a DC option for QSI Revolution, but the decoder has now been discontinued pending the introduction of a newer version
JonGrant4472 1 month ago
this is a beautiful layout
trainguy3 5 months ago
Man, this railroad looks fantastic. Best city switch scene(s) ever.
Trolleymoose 6 months ago
wow thats a very nice layout where you at
chrisjct 7 months ago
@chrisjct Thanks, Chris. I'm English and am living in Northern England
JonGrant4472 7 months ago
i notice the sound seems a bit high, if i reduced the volume from factory default 127 (from q2 upgrade) to 100 or 90, would that make the sound better, or do i need to use high bass speakers? overall...very nice video.
WAYNE1980AA 9 months ago
Sorry for my poor english. I having two questions to you. Where did you put the speaker inside the loco shell. Used the same speaker that comes with the QSI revolution or you put a different smaller?
generalgp76 11 months ago
@generalgp76 I used a 1 1/4 inch rectangular speaker and placed it face down in the cab, after taking out the interior detail. The inside of the cab acts as the speaker baffle
JonGrant4472 11 months ago
@JonGrant4472 - Thank you very much for your fast reply Jon. Great job with this QSI in this loco, amazing sound!!! Best regards. Julio
generalgp76 11 months ago
@JonGrant4472 thanks for the notes. I also have a Alco s1, (2 of them)with a MRC sound unit. I was able to keep the interiors and placed the speaker where the fuel tank was. If you search my vids I have a quick clip of one on my layout. They are great little switchers
Lmackattack 10 months ago
Very nice layout and great videos. Thanks for posting.
rhelmod 1 year ago
sounds awesome!
esiegel76 1 year ago
where did you hide the speaker? that shell has barely the room for a decoder. I have 2 of the P2K S1 and they were "fun" fitting the ESU decoders!
Lmackattack 2 years ago
@Lmackattack I used a 1 1/4 inch rectangular speaker and placed it face down in the cab, after taking out the interior detail. The inside of the cab acts as the speaker baffle
JonGrant4472 11 months ago
Can we get the original video of this?
dcalcutt 2 years ago
Nice detail on the layout
muddshovel1 2 years ago
Beautiful Layout!
jwerren78 2 years ago
The s1 has no turbo so should have different sound, the s2 has a turbo.
tpvalley 2 years ago
Agreed. I spotted the error shortly after sticking the film on here and have turned the turbo sound down to zero on the QSI Revolution decoder - the right sound is on my clip of the NYC Alco S1
JonGrant4472 2 years ago
You can turn the turbo sound down!?
cool.
Lovely layout BTW.
tpvalley 2 years ago
I just ordered a h1--44 by proto, proto 2000 or something, how do u rate them? smooth?
tpvalley 2 years ago
Nice layout. Very nice layout! Can practically picture walking there in the 'city'.
DocLaw172 2 years ago
nice sound,nice layout,how can I get nice grass patches like you have next to tracks?
aerobee58 3 years ago
Look for a product called Silflor, or something similar available from Scenic Express, in Texas
JonGrant4472 2 years ago
Jon:
Ok, I've got some of these that I'd like to retrofit sound into. How did you do it?
Thanks,
John Loesch
vzjtothalo 3 years ago
excelente amigo el video...cool
GM22C 3 years ago
Incredible, well done!
Toytrainsontracks 3 years ago
Fantastic layout! What are the dimensions? Would you mind sharing your trackplan?
jonnyspeed 3 years ago
Awesome video 5*****
dutchtrainmanserie22 3 years ago
The layout and sound are just simply fantastic and that's putting it mildly, a big A+ for this video, thank-you!
jmehl77 3 years ago
that looks real
one of the few examples of good modeling on youtube
n7275 3 years ago
Very nice!
what is the green in the middle of the track is it static grass..?
rcbaja 3 years ago
I used Silflor mat by tearing off small tufts at a time and gluing down individually
JonGrant4472 3 years ago
Beutiful layout.
The sound is good but they allways have that small radio in a big room sound effect.
Stil good though.
tpvalley 3 years ago
Was the S1 turbo charged? or which of the S units were besides the S4....
DX721 3 years ago
I found out that the S1 and S3 were not turbocharged. I also found out how to turn the turbo sound off - both after this video was shot and have now corrected the error
JonGrant4472 3 years ago
lol i was thinking this was real .
George21T 3 years ago
Very realistic looking layout!
AyTrane 3 years ago
what model number is the decoder?
aerobee58 3 years ago
Jon, your modeling and videos are fantastic.
Chuck Davis
Norfolk, VA
chuckswagon 3 years ago
HELLO IM NEW IN THE SOUN EQUIPED WATH YOU RECOMENDED QSI or LOK SOUND¿? SORRY MY ENGLISH ITS BAD
yourpageitsasheed 3 years ago
Hello there.
I would use QSI Revolution as long as they do the sound of the locomotive I am fitting with DCC sound. The decoder is more user-friendly.
Regards
Jon
JonGrant4472 3 years ago
I prefer Tsunami. :) That does sound good I must say! QSI has always had the best horns.
BNSF5608 3 years ago
your videos are awsome!!!
and now in high quality...
brombergrulz 3 years ago
Outstanding!!! You have just raise the bar about 10 noches for all of us trying to make decent model train videos. That was great!!! I enjoyed every minute of it! That was so real. One of (if not the) best on utube!
ennout 3 years ago
I was thinking Getting A Alco S1 for christmas But Very Great Video
chessie93 3 years ago
u got a lot of detail in the layout looks pretty real. GREAT WORK.
ohiosouthern 3 years ago
Very nice video. What kind of camera are you using to film this? Sure is clear.
ovationpdh 3 years ago
Sony Handycam SR36. I am still getting used to it and have just discovered the picture mode for indoor shooting
JonGrant4472 3 years ago
Good Video very nice Layout
LutzBS 3 years ago
I have watched many of your videos, but this is the first time I am comenting on it. The detail on your layout and the perspective shots are perfect. Really fine modeling. Very impressed by the work you have done.
Chesticus
Chesticus 3 years ago
Thanks, mate
JonGrant4472 3 years ago
Very nice! I'm glad someone has made a video already!
RailfanAlex 3 years ago
Nice
Tjsingle14 3 years ago