Stan Meyers Electrical Resonance

[TheJimmax]

P.S. if you are wondering about making just hydrogen check out hoffman apparatus or you tube "hydrogen seperation" or check the fuel cell store this is reality i deal with.

[irondmax]

@TheJimmax ok, now we have good conversation

you have to make sure no oxygen is in the storage bottle

but again storage is not what meyer worked on.

he worked on on demand hydrolisis and from normal water

no electrolyte

i asume you are planning to use paladium and electrolyte

do you care to expand on that?

[TheJimmax]

@irondmax The electroliser is 100% titanium plates, the electrolite is a solid polymer called nafion itis stable and non poluting . It is used with distilled water and requires no maintainance. I never mentioned this because you never asked. And for the record I have no problem with Stan Meyer but where i live christian kills christian in the name of god so i have no time for religion but did not want to get in to a pointless debate. This is where I came in. A valid topic spoilt by religion.

[irondmax]

@TheJimmax a man of god does not kill someone for god.

just because there is a bad person that says he does something in gods name, does not mean he is telling the truth.

and you can not blame god for that act, that he did not do

does not matter the religion, it is all the same, even people who do not believe in god, good and bad just the same as the believers

even the devil believes in god

[irondmax]

@TheJimmax ok so titanium and nafion, cool

where can i buy the nafion? and does the titanium carode?

is there a membrane still used to separate the H from the O?

how much wattage makes how much hydrogen

i asume it uses a PWM of some kind to limit the amps

do you have a link with this info?

[irondmax]

@TheJimmax i see, a proton conductive membrane and titanium plates

in fact i have one. the membranes are not so good as yours.

will you discuss yours with me in detail, next week perhaps. this interest me.

i would like to know your set up. i have a pwm with a regulating circuit i designed for my solar panel. i would like to know more about your polymer.

amp flow and output

thanks

[TheJimmax]

@irondmax As I said it is a work in progress. Their are no membranes as it will work at water pressure(about 4 bar here) and I didnt want to risk a breach.It is a stack of single cells which is bulky and requires a lot of plumbing but suits my needs at this time. Nafion from "The fuel cell store".At this moment I dont have any info regarding output etc. but I intend to open source this when completed. Al the info regarding this was picked up from various web sites and I am not ...continued...

[TheJimmax]

@irondmax .....creating any thing new just replicating something that seems massively over priced for what it is. I believe the hydrogen age is here but is being kept from us for the sake of the oil economy which the runs on.

[irondmax]

@TheJimmax yes i will check it out

our governments hold us back on this, and just human nature of hate and voilence

we just need to work together on this and do it as common people, show the government what we can do as one race, humans with a common cause.

a better life for all people

[cloughax]

@irondmax Nice work. Just wondering are your posting schematics for your setup online to the public

[TheJimmax]

@cloughax That is a very good question I am looking forward to the response.

[irondmax]

@cloughax the schematics are on other videos on this channel.

its the circuit meyer used on his display set up with the 9 tube array

i will send you the link

[cloughax]

@irondmax oh kool

[irondmax]

@cloughax check your messages

[TheJimmax]

As you seem to have difficulty understanding plane english I will spell this out. When I said "the people at nasa" I ment exactly that. Im a joiner, like J.C. And as for buying wind/ solar that is my point exactly, it can be done, no fantacy. I have no need to pretend or try to sound smart that seems to be your thing. If you search you tube"who's killing the hydrogen car" you will see what I mean. My windmill is built, the electroliser is under construction, just saving for the hydride tanks.

[irondmax]

@TheJimmax they store hydrogen in bottles. you can buy hydrogen in the bottle from a welding supply shop, others are storing hydrogen in propane tanks

DO NOT store hydrogen and oxygen together, you will die

i only post what i can show, dont make it out to be anything else

and the video here shows many things that you did not watch

[TheJimmax]

@irondmax Not sure where you got the oxygen from im talking about hydrogen not browns gas and I sugest you check out metal hydride storage which is a low pressure high capacity storage that is very stable and safe. You should really do more research before you make even more of a fool of yourself.

[irondmax]

@TheJimmax lol

ok

let me know how making just hydrogen works out for you

and let me know about that cheap hydride tank that can hold so much more hydrogen then an empty tank

you will learn after you spend a bunch of money

[TheJimmax]

@irondmax Deal , the "very expensive hydride "tanks can hold about 750 litres of hydrogen (in a solid state) at 2bar, to relrease enough gas at a continuous flow as least 3 are required . The total cost of the project is about £20 000 which is about 4 years of fuel for me and with the uk feed in tariff I get paid to make the electricity I use for the next 25 years which means the government pay me to fuel my own car, but even without this its still a huge saving not to mention eco friendly.

[irondmax]

@TheJimmax now where talking real stuff. why you did not talk like this from the biginning, is beyond me

[TheJimmax]

Stopped watching as soon as I saw J.C. mentioned!

[irondmax]

@TheJimmax glad you left before you had the chance to learn what meyer did

all meyer stuff has Jesus Christ on it

so dont bother watching any of it, and remain in the dark

good for you.

[TheJimmax]

@irondmax I think you will find what stan meyer did is widley published and also you will find that what he claimed has never been replicated and if you are suggesting that you can produce more efficent electrolysis than the people at nasa Im calling you a lier.If you want a hydrogen car use wind/solar and hydride tanks, simple and available without the need for myths like sm or jc.

[irondmax]

@TheJimmax what i claim is meyer did what he showed he did, and you are not learning anything. you call me a lier......i call you a lier

you imply your a top nasa scientist

i say your just an idiot trying to sound smart

you have no idea what nasa or anyone else has or can do. dont pretend you do.

and dont pretend you understand what meyer did

you sir are the lier, and a pretender

wind solar and tanks, you can buy all that stuff

[firepinto]

Awesome work! Now we just need a way to turn water into hinge lube! lol kidding. Stan was the MAN.

[irondmax]

@firepinto hinge lube............thats funny

stupid squeaky camera thing

yes stan was the man and real

thanks

[altgenesis123]

@irondmax You're using around 100 Watts (100V x 1A) Stan used 12W (12 V x 1A produced 1 Liter of HHO per min). I have not seen anyone replicate that yet. Watch his videos. He explains it so anyone can duplicate his work, yet none have to date. What gives.

[HHOiseparator]

Congratulations Max. Very good work. Can't hardly wait to see it run 9 tubes.

[irondmax]

@HHOiseparator i cant wait either my friend.....got alot of work to do before we can see it.

we will see it .....soon

[andywalkerplumber]

@irondmax keep up the good work max.

[irondmax]

@andywalkerplumber thanks

[Ace011mm]

I like it very much! :)

[irondmax]

@Ace011mm thanks Ace

[Iseekoutthetruth]

have you tryed to ignite it with a spark plug yet? plasma spark plug?

[irondmax]

@Iseekoutthetruth not yet.

[Iseekoutthetruth]

the sun is hydrogen and it pulses all the time also.

[irondmax]

@Iseekoutthetruth yes and it just keeps burning.

what about that?

[thewonn]

Excellent work!!!

Can't wait to see what you do next.

[irondmax]

@thewonn thanks . cell of 9 pipes is next.

did you get yourpipes together yet?

[thewonn]

@irondmax

niiiiiice!

Nope, not done yet...hopefully by Friday...

[irondmax]

@thewonn thats what i want to see.

i have not had the time to buy mine yet.

u have the clear plastic tube though

[Iseekoutthetruth]

so now that you know how to keep the amps down by pulsating, now all you need next is to know what frequency it takes to separate the hydrogen from the oxygen molecules to make hydrogen, with out having to use baking soda or any other chemical right? once you get the frequency pulsating fast enough to make the split you make hydrogen with out over heating the water or blowing a fuse am I right?

[irondmax]

@Iseekoutthetruth your more correct than most.

you are understanding it quickly i think

there is no electrolyte in this video. i forgot that. i will put that in the desciption

[Iseekoutthetruth]

tell me if i am understanding this right, you can use more voltages and keep the amps low because you are turning the power off and on, so the amps do not increase or get hot because of the off and on switching of the power? pulsing?

[irondmax]

@Iseekoutthetruth you got it.

your power supply in your computer does this.

yin and yang......equal...Give it only what it needs, it stays cool.

but extreme feed will erupt it quickly

[Iseekoutthetruth]

the yin and yang principle

[Iseekoutthetruth]

sounds like the video I sent you .

[irondmax]

@Iseekoutthetruth its everywhere. we see what we want to see.