I Have the same EXACT car. v6 07 mustang pony edition with flowmasters. but mine sounds like a fart can when it gets to high RPMs. is there any way to fix this?
@Gerbilinator I have flowmaster too and I think its just how flow master is designed and plus with a v6 it seems like its harder to get more of a growl than if u had a v8
sounds just like mine, i run a dual flowmaster 40 X pipe with chrome 4 inch tips on my 07 v6 Mustang.. im getting a K&N cold air intake system pretty soon along with a predator chip. Once i tune my engine and throttle body I can run 0-60 probably under 6 seconds to the high 5 second range.
to the guy that said it still sounds like a v6 well of course it does its just a single muffler what could it do? but it sounds amazing its what i have on my 2006 i get many compliments but i am in seek of a dual set up now... any ideas?
While I'm not sure if the Flowmaster AT will fit on the 07Monte Carlo, the exhaust is just a simple axle-back system and there are a wide range of available options for you. I'm sure you can find something for the price.
awesome sound i have a 2005 v6 mustang i completly transformed it n u have any suggestions on what would be a good DUAL exhaust for this there are many kinds of exhaust but what kind would give me the beasting sound???
This was an axle back exhaust, installed it cost roughly $150.
Other things you can do to make your car faster that doesn't require extensive work is get a premium air filter, download and install a tune, or add a cold air intake.
i was thinking about getting duals on mine but the back pressure isnt high enough so you get too much popping so if its sound youre looking for id stick to the single
Actually, you'd probably make it not as noticeable with a dual setup. Check out mustangcollective . com and see. Backpressure is not a problem when converting to duals.
Ditto, cutting the bumper wasn't an option for me. Too scary. :) Another 20,000 miles and some dings later.. I'll think about it, haha. But this exhaust is probably one of meatiest sounding axlebacks on the market and I like it.
Just to make sure, this Flowmaster is for a single exhaust for a V6? I looked up the price online and it runs for close to $200 give or take. When you said you got it for $150, that covered both the AT Muffler AND installation?
I Have the same EXACT car. v6 07 mustang pony edition with flowmasters. but mine sounds like a fart can when it gets to high RPMs. is there any way to fix this?
Gerbilinator 2 months ago
@Gerbilinator I have flowmaster too and I think its just how flow master is designed and plus with a v6 it seems like its harder to get more of a growl than if u had a v8
Chadthedrummer1 2 months ago
This sounds good Im gonna get the same one for my mustang
Chadthedrummer1 4 months ago
is that the 60 series?
IXxEatDaPooPooXxI 6 months ago
sounds nice did you take off the resonator?
jrocker040705 8 months ago
@jrocker040705 No I didn't
jtbndy 8 months ago
sounds just like mine, i run a dual flowmaster 40 X pipe with chrome 4 inch tips on my 07 v6 Mustang.. im getting a K&N cold air intake system pretty soon along with a predator chip. Once i tune my engine and throttle body I can run 0-60 probably under 6 seconds to the high 5 second range.
Bartels92 9 months ago
did you have to cut your bumper to get this to fit correctly? Great video!
jwhitie1992 10 months ago
to the guy that said it still sounds like a v6 well of course it does its just a single muffler what could it do? but it sounds amazing its what i have on my 2006 i get many compliments but i am in seek of a dual set up now... any ideas?
0726gf 1 year ago
sounds good. and can't beat the price.
maverickwolfe 1 year ago
personaly me i think that sounds good but i just think flowmaster super 40s sound better
DIENAMICProductions 1 year ago
Still sounds like a v6....
guyd37 1 year ago
Magneflow or flowmaster
Zetakid33 1 year ago
I have a 2006 mustang v6 I'm thinking about to just a flowmaster exhaust tip on it that can be welded or bolted is it gonna make the same sound.
Jenabzadeh1 1 year ago
i have the same car, 07 pony package V6... is that a single pipe or do you have dual?
alexvrce 2 years ago
@alexvrce i have the same one, pony package and all, and mines only single... i wanna put a flowmaster muffler on it
aTasteofJordan 2 years ago
great sound man!!! would you happen to know if this would fit on my 07 v6 monte carlo? or is there a similar set up for that price? thanks!
falcons55 2 years ago
While I'm not sure if the Flowmaster AT will fit on the 07Monte Carlo, the exhaust is just a simple axle-back system and there are a wide range of available options for you. I'm sure you can find something for the price.
jtbndy 2 years ago
@jtbndy
awesome sound i have a 2005 v6 mustang i completly transformed it n u have any suggestions on what would be a good DUAL exhaust for this there are many kinds of exhaust but what kind would give me the beasting sound???
oscarb1087 1 year ago
40 series?
jasonxay 2 years ago
thats awesome, beutiful sound man
hitman7777777777 2 years ago
that sounds beutiful.. any mods done to it or is it stock aside from the flowmaster 40 muffler?
hitman7777777777 2 years ago
Nope, simply added the flowmaster.
jtbndy 2 years ago
what all u put on and how much it cost?
eddieweinburg 2 years ago
Just the flowmaster was put on. It cost roughly $150-200 installed. I forget how much exactly.
jtbndy 2 years ago
great sound and vid man, this axle back is a cheap and good mod for a v6 stang, jw how easy was the instal, isnt it just a direct bolt on?
biffnacid 2 years ago
yeah just direct bolt on.
jtbndy 2 years ago
i think im going to get the American Thunder for my car as well. How does it sound inside?
Sounds really good man
RetroKreativity02 3 years ago
single muffler?
GSRGOPEDRIDER247 3 years ago
how much was the exhaust?
yoshiy 3 years ago
Roughly 130 installed I think.
meganlee0731 3 years ago
Nope, I haven't done anything except this muffler.
jtbndy 3 years ago
I just bought an 07 v6 stang, how much for the exhaust system? what else can I do to make it faster?
Turppa21 3 years ago
This was an axle back exhaust, installed it cost roughly $150.
Other things you can do to make your car faster that doesn't require extensive work is get a premium air filter, download and install a tune, or add a cold air intake.
jtbndy 3 years ago
Yea I was gonna put a k&n high flow and platinum plugs.
Turppa21 3 years ago
to make it sond this good did u update anything else or just put on a new muffler
geckoboy1111 3 years ago
Does it sound ok on highway?
Alonshalev 3 years ago
Yeah, sounds fine. Drone isn't too bad.
meganlee0731 3 years ago
I personally hate how flowmasters sound on these, I switched from a flow to a JBA. It'll do for now.
fastpacedgtp 4 years ago
i love how your camera lens is swinging in the reflection cause of the exhaust lol. nice sound im def thinking about this one
DANNYxxxxxx 4 years ago
damn fine, mate
been thinkin about gettin the AT series on my 'stang for a while, but now i definitely will
mastrchief32434 4 years ago
i was thinking about getting duals on mine but the back pressure isnt high enough so you get too much popping so if its sound youre looking for id stick to the single
68fastback123 4 years ago
Actually, you'd probably make it not as noticeable with a dual setup. Check out mustangcollective . com and see. Backpressure is not a problem when converting to duals.
AUSly09 4 years ago
I have that same exhaust... I love the sound. Maybe when the warranty is up, I'll switch to duals with them.
AUSly09 4 years ago
Yeah, I didn't want to deal with the body work associated with the duals right now. I might switch to duals a little bit later too. :)
jtbndy 4 years ago
Ditto, cutting the bumper wasn't an option for me. Too scary. :) Another 20,000 miles and some dings later.. I'll think about it, haha. But this exhaust is probably one of meatiest sounding axlebacks on the market and I like it.
AUSly09 4 years ago
it is really kool exhaust .i will get for for my stang.
tychuot1987 3 years ago
Just to make sure, this Flowmaster is for a single exhaust for a V6? I looked up the price online and it runs for close to $200 give or take. When you said you got it for $150, that covered both the AT Muffler AND installation?
coldmv 3 years ago
you can find it on ebay for a lower price, and about the installation anyone can do it with simple tools in about 40 min,
SmokyV6 3 years ago
Check out my custom made exhaust!! Ps nice vid man
oxcide101 4 years ago
1337
casecase160 4 years ago