Cap & Ball .17 Cal.

[Xxoo0o0o0ooxX]

@WW2medalsNpatchesME I believe so they are a tight fit on 11's But please be careful this is for last resort only.

[AfrikaaBombeetza]

can it kill someone? whats the fps?

[weasle83]

BULLSHIT lets see from behind you so we can see that piece of shit go off

[Xxoo0o0o0ooxX]

@weasle83 Sorry I get yelled at also for shooting to close just so you can see it go off. But there is a few more videos where you do see it going off.

[austinXR70]

you can get one at dixie gun works

[MulalicHaris]

where can you get these?

[Xxoo0o0o0ooxX]

@MulalicHaris Dont know. Cabelas is where I got it they dont sell it anymore.

[gunlover900]

@Xxoo0o0o0ooxX how much doe it caust and where can i get it

[scotchaaron]

Its actually a 4.3 mm Look at the side of the gun. .177 is 4.5mm and thats why they dont fit. And i would suggest getting some #10 CCI caps, Might have to order them but they fit perfect and have lots of power.

[BRR]

Excellent video, I have the same pistol, I made a little mod on it to prevent droping the breach when reloading. I used my dremel and drilled a small hole in the little handle part of the breach and put a small split ring through it. Now I don't worry about losing or droping it when loading.Do you have the 209 primer powered Guardian Derringer made by Pedersoli? I have one, well made, nice little pistol. Shoots well.

[Xxoo0o0o0ooxX]

@BRR No I do not have the 209 but have been thinking about getting one :-)

[busyhands94]

it seems that mine is getting more accurate as time goes on. i fire it everyday and the rifling gets smoother and more perfect with the more rounds i put through it.

[darknessninja02]

where can u buy this gun?

[Chwigga89]

i hate to be a bother but can you explain how you rolled down a .177 to a .17?

[KingOfChaos213]

Nice way to devalue an antique even further :)

[Xxoo0o0o0ooxX]

@KingOfChaos213 Got it to shoot. Not to look at.

[scotchaaron]

@KingOfChaos213 Their not antiques, they are reproductions by Davide Pedersoli. made to shoot not look at like the man said.

[KingOfChaos213]

@scotchaaron Could you provide a link so i could have a look at this product range?

[scotchaaron]

@KingOfChaos213 Go to davide pedersoli Pick one up so you can enjoy the fun also.

[KingOfChaos213]

@scotchaaron I would if i could but i dont have a firearms certificate and i doubt Great Britain would issue me one :(

[scotchaaron]

@KingOfChaos213 davide-pedersoli wont let me post a link

[KingOfChaos213]

@scotchaaron No worries i managed to find it myself, nice little pistol.

[75kilo]

if I buy one I would only use Blackpowder. smokless powder is eighttimes more powerfull, so its hard to measure the right charge.

you hitting a bottle at 20 yd? congratulation. for me its hard to hit a tin at 10yd with the liegi derringer. i´ve make a video (but the liegi have no sights) do you have experience with the 209 ignition derringer from pedersoli?

[75kilo]

nice pistol and video,

i´m looking to buy one but read storys obout bloody fingers caused by cap shrapnels.

whats your load for 1000 FPS? FFFFG?

how many grain can you place in the small nipple? do you try heavy bullets like "rabbit magnum" from h&n?

[Xxoo0o0o0ooxX]

They say to wear a glove when shooting this pistol & its a good idea but I shoot it all the time with bare hards once in a blue moon a cap will scrach me but thats it. as for powder I was using powder for loading shootgun shells I think is slow burning. But faster then BP I mean just a pinch what ever you feel safe with if you load to much the nipple bolt will give out & they are like $60 to replace Gamo lead ball works best & are 8,17 gr I used eunjins 16.9 gr pellets rolled down.

[75kilo]

nice pistol and video,

i´m looking to buy this pistol but read bad things like bloody fingers caused by cap shrapnels.

whats you load for 1000 FPS? FFFFG? how many grain can you place in the small nipple?

do you try heavier bullets like "rabbit magnum" from h&n?

[Xxoo0o0o0ooxX]

THe eunjins fired great good punch to them. I love smashing bottels from a good 10-20 yards using the gamo rockets with the harded steal tip I think it may go faster then 1000 FPS as it went thru 800 pages in a phone book

[machaign]

I would really buy it by e-bay.

[Xxoo0o0o0ooxX]

Just found out these small gems are no longer for sale.

[WurledPeas]

@Xxoo0o0o0ooxX Pedersoli still has them on their site and Dixie gun works still lists them @ $185.... ouch.

[Xxoo0o0o0ooxX]

@WurledPeas Yes & they will keep increasing. When the gun came out it was $109.00 at Cabelas.

[WurledPeas]

@Xxoo0o0o0ooxX I remember that. I kept saying "later, I'll get one later". Hindsight is always 20/20.

[FabioCrow07770]

cap and ball's are pretty cool

[camerl2009]

i made a mold for it useing a 11/16 drill bit

[Xxoo0o0o0ooxX]

Nice how well do your pellet work. Do they take the rifling. what are you using for the mold wood metal? And how do you remove them after casting? Thank you.

[camerl2009]

i used steel flat bar cut in 2 then i drill 2 holes for bolts and then i used my dill press to drill the cavity

[camerl2009]

a 11/16 drillbit is 4.30mm is perfect

because it will grip the rifling

[kriegmeister3000]

An ear ringing experience to say the least.

[kriegmeister3000]

I had those roll caps when I was a kid. I use to hit the roll with a hammer. KaBOOOOM!!!!!!!!!!!!!!

[Xxoo0o0o0ooxX]

I did the same thing when I was a kid LOL!! It was very loud.

[BigAgitator]

@kriegmeister3000 Me too!!!!!! I doubled 'em up and they were louder, then I did like 20 with a hammer, then half a roll, then like hte whole roll, ha ha!!!

[Nwest82]

Yeah man I love that gun! Can these still be purchused. I'm going to get the 209 primer ignition pistol, at some point, not sure when. But I really like that Rem. parlor pistol you got there and would rather have one of those. But at least I'll be able to give a review on the 209 as it would appear that there are no video reviews on that pistol yet.