I used my new Husqvarna 236 for the first time today on a light job. I stopped for a break, checked fuel, chain lubricant + tension. Since then I haven't been able to start it. I've tried the various troubleshooting procedures, followed up on tips... Nothing. I'm stumped.
This is new today and I've put it away with the job half completed, thinking about taking it back to the dealer already – which I loath to do at this stage.
Anyone with any ideas, please let me know. Many thanks!
@rubio66 This problem can be caused by several malfunctions. Check your ignition (spark plug), the fuel filter, the air filter, clean your carburetor carefully with compressed air. Also a incorrect working fuel vent can cause that problem. You need to exchange these parts (to diagnose open the gas cap when the saw wont start and pull when the kill switch is down- after that close the cap and start normally).
@rubio66 I have had the same problem. I purchased an E series 235, the first saw would not start at all, then I got a second saw of the same model and the saw started once and would never start again. Not sure what the problem was, I just gave up on that brand and entirely.
My 288XPW is 23 yrs old & starts with 2-3 pulls cold,1 pull warm every time.You definitely need to use the decompression valve when cold starting though,with 175 lbs+ compression it'll practically throw your shoulder out otherwise. I cant see how their smaller saws would even need a decomp button.With all the starting problems most of their new smaller homeowner saws have,you'd be better off buying one of their older small/mid sized pro saws used from a trusted seller for less cash.
I have a Husky 435 - same thing - horrible to start. And 5-6 pumps?? You'll be pulling the plug and drying it out. There should be a recall on these things. I'll never buy Husqvarna again. My old 266 is easier to start.
@EustisRider I have a 20 year-old Stihl MS 260 Farm Boss. Once it's warm you can start it in one good pull even after 15-20min...awesome quality. Nothing against Husqvarna though, used several of their saws and hey always did their job ok. I prefer Stihl by price and looks, mostly.
It sounds so simple... But it isn't. I have problems starting all the time. Even my degree in motor mechanics does not help. The machine is too sensitive. Pressing the air purge 5 times already makes it drown. So you have to wait (even dry the spark plug) en try again.
I bought this chainsaw yesterday. I've tried to start it 5 times now, giving up each time. I can't believe it can be so difficult to start. I've followed the instructions and watched the guy at the shop start it.
Don't buy this chainsaw unless you have a degree in motor mechanics.
I used my new Husqvarna 236 for the first time today on a light job. I stopped for a break, checked fuel, chain lubricant + tension. Since then I haven't been able to start it. I've tried the various troubleshooting procedures, followed up on tips... Nothing. I'm stumped.
This is new today and I've put it away with the job half completed, thinking about taking it back to the dealer already – which I loath to do at this stage.
Anyone with any ideas, please let me know. Many thanks!
rubio66 1 month ago
@rubio66, Same thing happened to me with a 350. Looking for a video now. Did you find any other info?
shanecountry 3 weeks ago
@rubio66 This problem can be caused by several malfunctions. Check your ignition (spark plug), the fuel filter, the air filter, clean your carburetor carefully with compressed air. Also a incorrect working fuel vent can cause that problem. You need to exchange these parts (to diagnose open the gas cap when the saw wont start and pull when the kill switch is down- after that close the cap and start normally).
tobbessen 1 week ago
@rubio66 I have had the same problem. I purchased an E series 235, the first saw would not start at all, then I got a second saw of the same model and the saw started once and would never start again. Not sure what the problem was, I just gave up on that brand and entirely.
iota1122 1 week ago
My son's birthday is next week. I'm buying him a chainsaw. It will NOT be a Husqvarna. It will be a Stihl MS 250 for $299.
EustisRider 1 month ago
@EustisRider great your going to buy a chinse chainsaw.
MrBigdroid1 1 week ago
My 288XPW is 23 yrs old & starts with 2-3 pulls cold,1 pull warm every time.You definitely need to use the decompression valve when cold starting though,with 175 lbs+ compression it'll practically throw your shoulder out otherwise. I cant see how their smaller saws would even need a decomp button.With all the starting problems most of their new smaller homeowner saws have,you'd be better off buying one of their older small/mid sized pro saws used from a trusted seller for less cash.
onecelticwarrior 2 months ago
I have a Husky 435 - same thing - horrible to start. And 5-6 pumps?? You'll be pulling the plug and drying it out. There should be a recall on these things. I'll never buy Husqvarna again. My old 266 is easier to start.
EustisRider 2 months ago
@EustisRider I have a 20 year-old Stihl MS 260 Farm Boss. Once it's warm you can start it in one good pull even after 15-20min...awesome quality. Nothing against Husqvarna though, used several of their saws and hey always did their job ok. I prefer Stihl by price and looks, mostly.
KnorpelDelux 1 month ago
It sounds so simple... But it isn't. I have problems starting all the time. Even my degree in motor mechanics does not help. The machine is too sensitive. Pressing the air purge 5 times already makes it drown. So you have to wait (even dry the spark plug) en try again.
iAernout 2 months ago
i bought 240 model finding it hard to start as well use to have a cheapo mcculloch which started first time every time as it had auto choke !!!
TheMingachimp 4 months ago
I bought this chainsaw yesterday. I've tried to start it 5 times now, giving up each time. I can't believe it can be so difficult to start. I've followed the instructions and watched the guy at the shop start it.
Don't buy this chainsaw unless you have a degree in motor mechanics.
MichaelLeppan 5 months ago