that engine is lean on hsn hear it run high rpm for a few seconds when you release the throttle this is whats know as run on. richen hsn like 1/4 turn then run a few passes till it clears up. my trx 3.3 in my revo has 5 gallons through it and i can still run 5 tanks through it without shutting it off or it cutting out.
this engine is to lean on the hsn everytime you let off the gas it takes a few seconds to drop rpm is what is known as run on. my trx 3.3 will fun 5 tanks straight without over heating on shutting off.
@x7Chaosbullet Almost a drop in. A few mods have to be made to the crankcase to be able to mate up the EZ-Start, the crankshaft had to be shorted a few mm for clearance, and a custom exhaust manifold had to be constructed.
@DawgBone 4 shoe clutch should be going on tonight. :) He put the wheelie bar on it last night, and we put a power tune on it today, now it REALLY ROCKS! Even with the stock clutch it's an absolute MONSTER. I'm fixing to throw another video up of it tonight with it's power tune, this truck is just too much fun. He let me put a tank through it, and I fell in love. :) Never thought I would say that about a Traxxas!
that engine is lean on hsn hear it run high rpm for a few seconds when you release the throttle this is whats know as run on. richen hsn like 1/4 turn then run a few passes till it clears up. my trx 3.3 in my revo has 5 gallons through it and i can still run 5 tanks through it without shutting it off or it cutting out.
ashc8907 4 weeks ago
Comment removed
ashc8907 4 weeks ago
this engine is to lean on the hsn everytime you let off the gas it takes a few seconds to drop rpm is what is known as run on. my trx 3.3 will fun 5 tanks straight without over heating on shutting off.
ashc8907 4 weeks ago
idle is way to high
TheTwitch96 1 month ago
@TheTwitch96 The TRX linkage wouldn't allow for the carb to completely close to it's idle position. It was modified after this run to work correctly.
FragTek 1 month ago
nice t-maxx :)
monsterjamrace 3 months ago
Was this a droppin?? or what did u do to put it in because i wanna put one of these in my ntc3
x7Chaosbullet 5 months ago
@x7Chaosbullet Almost a drop in. A few mods have to be made to the crankcase to be able to mate up the EZ-Start, the crankshaft had to be shorted a few mm for clearance, and a custom exhaust manifold had to be constructed.
FragTek 5 months ago
Nice
Psprepairman86 9 months ago
Why so stiff with the suspension?
sherrod0506 10 months ago
@sherrod0506 Because we bust out jumps over houses and shit.
FragTek 10 months ago
Kewl stuff mang...
When it flips onto it's back and sliding, nail it then quickly stab on the brakes....<--- It'll put itself back onto it's feet....
It's gonna need a better clutch for sure.... That 3.4 is a stout little motor...
DawgBone 11 months ago
@DawgBone 4 shoe clutch should be going on tonight. :) He put the wheelie bar on it last night, and we put a power tune on it today, now it REALLY ROCKS! Even with the stock clutch it's an absolute MONSTER. I'm fixing to throw another video up of it tonight with it's power tune, this truck is just too much fun. He let me put a tank through it, and I fell in love. :) Never thought I would say that about a Traxxas!
FragTek 11 months ago