Hi to anyone who can help me with this question. i have a skoda octavia 1.6 litre fsi sr engine do you think that i can install a m45 eaton superchager to it and if yes,in addition to the supercharger what else do i need
It depents on how much power you want to make! For a low boost instalation you need the supercharger, an intercooler, solenoids, some mounting structure for the supercharger, pulleys and a belt to move the charger, and to remaped the cars ECU!
My car only made 176 bhp on that run as unfortunately it could only be revved to 6.5k rpm as the G60 injectors were running out of fuel at that point, the bigger injectors i was waiting for did not turn up in time. The cam that was in the engine on this run would have not even peaked power at 8000rpm which is as far as the standard ecu can go. A previous run with the standard cam saw this 1272cc 8v engine make 189bhp at 6700rpm and 162 lb/ft of torque.
it was at 189bhp before, as karl has said, i was waiting upon bigger injector from the states that did not turn up in time for this rolling road day. The cam does not even peak power at 8k rpm, the G60 injectors that were in it ran out of fuel at 6700rpm at 176bhp
Great Polo! I Love my Polo CL :o)
Levamix 7 months ago
Hi to anyone who can help me with this question. i have a skoda octavia 1.6 litre fsi sr engine do you think that i can install a m45 eaton superchager to it and if yes,in addition to the supercharger what else do i need
fogarate2483 3 years ago
It depents on how much power you want to make! For a low boost instalation you need the supercharger, an intercooler, solenoids, some mounting structure for the supercharger, pulleys and a belt to move the charger, and to remaped the cars ECU!
Ismaak5 3 years ago
i take it has steel internals to rev past 8K ?, awsome machine by the way, love it
finlay230 4 years ago
i drive a g60 with eaton g60----please looked my video...
alexpaddy2006 4 years ago
winey bastard engine! Love it!!
spermbank1 4 years ago 4
Sweet. I love G40s...especially this one!!
dafatcats 4 years ago
My car only made 176 bhp on that run as unfortunately it could only be revved to 6.5k rpm as the G60 injectors were running out of fuel at that point, the bigger injectors i was waiting for did not turn up in time. The cam that was in the engine on this run would have not even peaked power at 8000rpm which is as far as the standard ecu can go. A previous run with the standard cam saw this 1272cc 8v engine make 189bhp at 6700rpm and 162 lb/ft of torque.
LregG 4 years ago
hi mate what cam u use then did it make car slower until remap or do u need a new ecu wired to cope
i just got my g40 eaton running seems sweet have 260cc injectors on the way and planning a cam and a remap any views ? cheers
garyroot25 4 years ago
i ran mine with high lift cam and big injectors and it was slower think i need head work done to see befits so iam back to original cam
garyroot25 4 years ago
Sure does when the older Polos weigh in at around 830kgs.
KarlCLCoupe 4 years ago 3
Geez thats great. Does it move?
warp320d 4 years ago
I think the owner reported 176bhp on that run, with the fuel map not quite set-up. Not bad for a 1.3 anyway!
KarlCLCoupe 4 years ago
Its noisy, it must be fast!
isitaboat 5 years ago
it was at 189bhp before, as karl has said, i was waiting upon bigger injector from the states that did not turn up in time for this rolling road day. The cam does not even peak power at 8k rpm, the G60 injectors that were in it ran out of fuel at 6700rpm at 176bhp
LregG 4 years ago