Benq xbox360 flash

[kingboricua20]

Hey was up every 1 i been tryin to flash my benq im usin iprep 008 and wen i try to make it the usb bootable it tells me driver not ready and show me some num can any 1 tell me wat can tha be plz i will appreciate it if some 1 help i realy want to flash my xbox oh and im using Asrock G31M-S mother board i dont no if my motherboard is compatible but will like to no ok ty peace.

[erfqwhgs]

firt you have to know if your motherboard have chip7 VIA , if dont you have to buy a pci card with that chip,if already have de chip in the motherboard just use iprep creat a flopy and boot to dos than make all the steps

[SoccerNewsAmerica]

Try this tutotial using jungle flasher

xbox360flash(dot)blogspot(dot)­com

[Arjaysuka]

i have a flashed 360 and updated it to nxe...

is it allright?

and is it fine to install pirated games on it to reduce load times?

[erfqwhgs]

dont recommend instal pirat games in your HDD drive.only original games

[Arjaysuka]

why?! it works fine!! many people do it here in the phl

[hondajdmcivic]

hey man...i need some help...ive flashed benq before but today when i did the update for 1.51 i kinda screwed up....after i did dben then my serial number after it read the banks it gave me an error...so i restarted and then tried flashing again....when i type dben then my serial it says director for ofw already exist....soi thought it was ok and erased my firmware...i tried flashing (fben) and it says error cfw does not exist..i saved my ofw from the first time i flashed i have the drive key to

[erfqwhgs]

you have to flash withe mtkflash , ceate the withe flash tool and flash you drive withe MTKFLASH in dos

[ralphnasty]

i flashed my drive using jungle flash but still wont read or 360 games...can u help?

[erfqwhgs]

what show on screen? wgat is the mensagem?

the best way to flash benq driveit ussing iprep

[mikatarkela89]

maybe you could send me the firmware if I give you my email?

[erfqwhgs]

ok give me you mail

[mikatarkela89]

and still have.. :/

[mikatarkela89]

ok i had some problems with iprep saying that the firware-file is not right...

[mikatarkela89]

what tools did you use?

[erfqwhgs]

the iprep and flopy drive ,nothing more :)

[almadawarrior]

penso ter uma xbox com uma drive benq, a julgar pelos fios brancos que consegui ver no orificio por baixo da porta da drive, sera que este cartao pci da' conta do recado? PCI-Card-VIA-VT6421A-For-Xbox3­60-Pc obrigado

[erfqwhgs]

sim 90% das placas pci com chip7 via funciona sem problemas com todas as drives samsung , benq e lite on.

[cakespit]

do you have a name for your project?

[hamburguer2]

men if you did this mix i respect you

[erfqwhgs]

yes i made it :)

[DennisC94]

can i flash a benq using my 680i motherboard?

[Alusaint]

mines say phillips and lite-on digial solutions cooperation.

[erfqwhgs]

lololyou cant flash that drive so simply its a lite on drive you have to buy new hardware to flashe that drive,you cant whit iprep is not so simply

[doomdevil666]

iextreme 1.5 has come out and it CAN flash the lite-on dirve

[Alusaint]

this is my first time.

[erfqwhgs]

what is your matherboard? have chipset VIA? it was very important

[erfqwhgs]

attention, the lite on i like benq , just the name outside is diferent,see the name well is on the staples outside

[Alusaint]

ok at the part where i turn the xbox on and off where it says d1 when i turn it off and when i turn it back it just stuck there and won't move forward to the 0x73 good drive status its says d2 instead of 0x73. any tips

[erfqwhgs]

you have make a successful flashe on the first time? or it is the first time now ?! make a backup off you original firmware , if you can't flash it with iprep try mtkflashe , remember do ever but ever a backup of your original firmware

[Alusaint]

if i do this to the xbox 360 can i play original xbox games without the hard drive

[zero16lives]

no you still need the hard drive

[Alusaint]

can i use an esata cable its a black cable from best buy

[erfqwhgs]

the sata cable is not the most important, the hardware was, buy the ck3 tool

[vraj3patel]

what is the website for database 360. and what do you mean by hardware, do you mean by my hard drive

[vraj3patel]

can i flash the dvd drive that came in my xbox 360 when i bought it from bestbuy.

[erfqwhgs]

you can flash any drive you want at moment ixtreme for lite on are be releasted , but you have to buy the hardware needed,but first see wat drive you have go to website database 360

[pow2637]

so what is VIA?? know i'm being dumb, but as i say it has just worked on the samsung

[erfqwhgs]

if you unlock a samsung without problem you do the benq drive well,just fallow the steps on the screen

[pow2637]

i have 4 sata ports on the motherboard? it worked okay for samsung

[pow2637]

help me pleeeeeeease... i'm trying to flash a benq drive can get it to the point where it say D1 and thats as far as it lets me... Just to test myself i have just flashed a samsung using the same method and it worked perfect, but i cant use that drive as it came out of another machine..HELP is it me or cant this benq i got cant be flashed!!

[erfqwhgs]

you just have to fallow the steps on the screen turn off the drive when you have to,etc etc,ver y important you you sata card is VIA ? THE CHIP SET HAVE TO BE VIA "sorry the ingles"

[jerome70743]

hi im a noob at this but how do u put ur original firmware back on the drive

[hectormanuel360]

do anyone knows if i can update my 360 with the new dashboard if is a flashed version.

[erfqwhgs]

yes i think so,if you have to be banned ,you already be

[erfqwhgs]

son i go post a video step by step to dump a dvdkey in the lite on drives.

[livebunkerking]

Did you turn your xbox off at the end?? you are suppose to leave it on because thats a bug in iprep is when it asks you to turn your xbox off at the end....

[erfqwhgs]

yes in the end i turn the xbox off,all away do it, and i never have problems

[figurehead1971]

Please can you tell me what mix of Bjork's - Undo this is erfqwhgs ?

[checka1989]

whats the song name i love it

[figurehead1971]

That song is Bjórk - Undo. However I don't know this particular mix of it, perhaps erfqwhgs could tell us?

[Badflame101]

i have

2x ATA/133 IDE PCI VIA6410 chipset

will it work?

[erfqwhgs]

yes,any VIA CARD work fine for samsungs and benq drives

[FUTUREPRO62]

how do u know if u have a via card??

[erfqwhgs]

via is the chip in eprom in the card,take tham and take a look what is write in the chip

[tinyGhost17]

btw guys i dont get that "writting bank" thing can some 1 tell me how to do that bet i cant get that to work.. HELP ! pls

[tinyGhost17]

my sata thing is on board and yes it fits in my xbox can you please tell me how i can find my sata port number ?

[johnsmith66]

great music, whats name of song?

[GTAhelper]

dude you made it look too complicated (i mean the same thing takes less time)

[erfqwhgs]

the people have a lot tutorials in webs pages ,just read all themes

[GTAhelper]

i know. i flashed mine without iprep

[tinyGhost17]

can you help me flash mine i got on board sata thing.. and it loads ebverything perfectly i cant make my xbox360's light flash when it tells me to turn on then off agen for 2 secs if fink.. no shit happens please i need help.

[Visual1987]

dude can you upload that music to rapidshare in mp3

[erfqwhgs]

i go try it

[Visual1987]

Did you upload it?

[roush777]

hi .one question i can use my sata conection in my mother board? i have 3 connection to connect a sata cable there

[erfqwhgs]

if your sata is VIA CHIP7 YES,if not you have to buy a pci card whith chip7 VIA

[jackraiden00x]

I been trying to flash my BenQ drive but I keep getting an error. It goes through the readings bank with Okays and then I get an error. It states on the screen like my serial number as a folder "\BenQ-CFW.bin not found". When I try to flash, same happens. It says that it was aborted because file "BenQ-CFW.bin" wasn't found.

I used Iprep 101 7.2 beta and firmware Benq Ixtreme 1.41. Does anyone know what the problem is?

[erfqwhgs]

you have to read the original firmwera first,have you do it? te command is dbem xxxxxxx xxxxx and after this you flash the drive fbem xxxxxxxxxxxx xxxxx

[HunterHunter88]

do you have any tutorial guides that i can follow to do this? is yours a 6038?

[leemundo]

jackraiden00x, your problem lies with the version of iprep you are running, something to do with batch files or what not, you need the v1006 version mate

[roscoe19151]

I have an Benq VAD6038 if this helps

[roscoe19151]

Status: 0x7F

this what I get every time i try to flash it....

please help

[erfqwhgs]

connect the drive on pc turn on the pc ,let start,turn on xbox boot pen os disket drive ,turn off the xbox just turn on only then after the serial write it and press OK

[roscoe19151]

here what im doing

Boot from the flash drive

the I type

C:\cd tools

TOOLS>dosflash

I get an

Status:0c80

then from time to time it switches to

Status:0c81

what am i doing wrong

[Magnum1978]

great music, what is it? I'm not usually a fan of Electronic stuff but that is great.

[erfqwhgs]

that sound was made for me , i have mixed xD .....

[fregenidiot]

Nvm i got it to work just had to re do every thing!

[erfqwhgs]

so dont read the original game im correct? in that case , seed to microsoft

[fregenidiot]

Ok i figured it out... but when i try to play a game i payed for it says please put xbox 360 game into a xbox 360 console!?!? lol

[erfqwhgs]

and the original games ? read well?

[fregenidiot]

Ok i got my orig.bin file and i copy'd it to ixtreme 12x and clicked make ixtreme firmware but it just keeps saying copy orig file to this directory first but its already in there?! is there any other program i can use to mod the firmware???

[erfqwhgs]

you can made all your self ,but iprep do all alone ,read original.bin , make ixtream.bin and flash the drive

[fregenidiot]

ok i downloaded it off bittorrent. Ill just re learn how to do it with iprep thanks!!

[fregenidiot]

Oh well i guess thats good news! Do you know where to find the iprep files?

[erfqwhgs]

try xbin,if you dont find i seed to you

[fregenidiot]

Does any one know how to get the port number for the via sata card!?!?

[erfqwhgs]

for wat you want the port number? i have flash more than 20 xbox all them benq and never need the port number =\ you just have to select PATCH MTKFLASH wene you are creaiting the pen or flopy drive whit iprep , cheers

[erfqwhgs]

when i get some time i put here a video step by step

[paintBALLER37303]

if your having trouble with this. i can do it for u, just send me a msg and ill help

[erfqwhgs]

the help they need are on the Internet try search and you find

[ohjenny1980]

On my via pci sata controller it has a chip set of 6421 chipset would this work or will i end up bricking my drive some how?

[erfqwhgs]

hello if you do the write things ,you dont braik your drive try read some tutorials ,maybe help =)

[raven32444]

u could cut the traces....but that requires opening up the drive and fliping the board over...did u get it to read a game? i can only read a 'movie' saying insert into 360.mktflash wont work for me.what gives? i cut the traces, dont have the VIA.

[erfqwhgs]

hello, if you dont Have via chip7 ,try buy one,only taht way can flash your drive

[daaudiome]

doesn't iprep just build up the boot disk with utilities, then afterwards you got to dump the firmware and mod it ? or I'm mistaken

[erfqwhgs]

when you create the floppy, you have to seleccionar one firmwera a ixtream,when already these to flashar when reading original.bin of drive iprep creates firmwera altumaticamente ixtream with dvd key of yours drive, later it is alone to flashar as say in the pograma

[daaudiome]

Kay I checked some vids it's easy to use Iprep and later dosflahs to read and write, but how do you mod the firmware I think it was done using hex editing right?

[erfqwhgs]

program do everything alone you only have to create the floppy or pen drive with iprep

[daaudiome]

Hey man I'm about to get an xbox 360 elite in a couple of days I'm going to check for the 175 watts label on the box so i'm sure it's falcon. Now there's no problem the drive its benq and can be flashed to read copies?. What's the best method for flashing the drive I haven't been on the xbox scene reading forums so that's why I'm asking you man if you can guide me through kewl. cheers

[erfqwhgs]

hello you hate to use the MTKFLASH to go back to original firmwera creat a flopy or a PEN bootable firmwer ORIGINAL.BIN and MTKFLASH insithe ,and go to DOS start de boot flopy or PEn drive,and do this

mtkflash w /m firmweraNAME.bin

[racialnuke]

Think i found it can it be

Via VT6410 IDE RAID controler?

[racialnuke]

How can you see what chipset you have? ty

[erfqwhgs]

the best way to flash Benq or Samsung drives is to usse the iprep pogram,it´s easy to do,dont try dosflash ,the iprep do everything the console needs to read backups

[viccinho1]

i used dosflash and ixtreme v 141 but it didnt work well

the xbox now reads movies only,

and i cant get my original back up

cqan you help me or send me a modified firmware to use

[erfqwhgs]

in your case try reflash the console , usse the iprep

[chotaz]

chefe, eu sei que tenho Via Sata Card, estás nas configs de hardware do PC, ams como connecto a drive ao PC?

[psykepr]

Do you need a special chipset or motherboard or just any with a sata port?

[erfqwhgs]

you need a chip7 VIA or in case if you have nforce chip7 buy a pci card conceptronic ide and sata connect this have VIA chip7

[maikeljaksom]

your console have hdmi ??

hdmi needs other type of flashing?

[erfqwhgs]

my xbox have HDMI ,and the flash is the same for all drives BENQ

[maikeljaksom]

thaks man

[Bighead478]

what sata card?

[KeekleKopter]

did you use the onboard sata from your motherboard or did you buy a PCI sata card?

[KeekleKopter]

did you use an onboard sata port or did you buy a PCI sata card?