www.Evike.com - Disassembly Guide for JG MK36

[Colbs378]

Does any one know what I did wrong?? I upgraded the hop up and now the BBs roll out of the barrel what did I do wrong?

[TheDestructimation]

HELP! my jg g36c keeps on making a thumping sound in the motor area and will not fire. what should i do?

[OneeTimer]

Does anyone know a good battery with a link to it so i can buy for my gun? Just ordered my JG mk36 and would like a different battery! Thanks.

[wildcat312]

I accidently put in a battery that was to big for the gun and now the hand guard is won't come off. could someone please give me some advice.

[20324758]

@wildcat312 use brute force

[oPiSgThI]

My pin between the trigger and the gearbox wont come out what do i do?

[Revencher]

Where is the gearbox disassembly vid

[peterkleve15]

My SRC G36K bolt handle fell off! HELP! does anyone know where i can find a new BOLT HANDLE!

[JaJoCia]

the echo 1 mk36c doesnt have a bolt holding the magwell in, it appears to be just a pin. how would i go about removing that without damaging my gun?

[marcuoit]

@JaJoCia push it out with a pen, it'll be fine

[Airsoft1017]

mine has a crane stock and doesnt want to fold to get to the gear box

[hawkg36csnipes]

hey what does it mean when you cant switch the slecter switch to auto or safty cause of as right now it is only in simi

[BLARG0868]

Come on Evike! Get an HD camera, I can barley see it.

[12choucharlie]

Hey, I kinda figured out how to do it myself, but on a gun like the G36 it would be very helpful if you guys could make a vid on how to put in a tightbore or fix the hopup

[MrBeaverwarrior]

i prefer working on m4s since i hate g36s are bitch to open up to the inner barrel

[hydrote]

My hopup is stuck... Any idea how to fix?

[freeofkings]

@hydrote mine too.

[Miamishoe]

How do I remove the Flashhider?

[M3chan1calAP3]

specifically what type of motor is in the gun because i would like to replace mine with a much better one that increases the rate of fire. ( i would like to know if it is a short type, medium type, or long type )

[freeofkings]

@M3chan1calAP3 i believe short. i was looking into that, and someone told me short.

[M3chan1calAP3]

@freeofkings its a short type i found out a while ago thanx anyways though

[lukemartian24]

I actually do go full cqb with a usp .45, I tear more shit up :)

[helljumper1893]

be a badass and get an AK, folks.

[martinairsoft123]

@helljumper1893 noob alert!

[helljumper1893]

@martinairsoft123 i'd rape you any day. i go full-on cqb with a 1911. and i tear shit up

[Asianjumper103]

is it just me or should he get a better quality camera cause alot of the parts come out blury.

[slaytallicadethsb]

how do take the flash hider off this gun? i need to take it off for a barrel extension

[Fantarulz83]

wow this needs how to put a tight bore in

[SuperCod5killer]

does anyone know how to replace the inner barrel perferably a professional

[azndodohead]

yea i replaced my barrel on my own and to get the barrel out u need to push the hopup and barrel foward and then turn it and it should pop out

[SCOOL8896]

@SuperCod5killer remove the front end, slide the hop up and inner barrel out. there is a clip on the front of the hop up, remove it. slide out inner barrel.be careful to not drop the nub. take the bucking (rubber sleeve) off inner barrel.slide it on the never barrel. spray with silicon oil. slide back into the hop up making sure the nub is in place. put the clip back on, slide back into fron tend and put the gun back together

[metalchocobo410]

wait are the new JG G36's have the black 09 reinforced gearboxes??

[ziwx]

its v3.. :S

[echo1648]

i did this to fix my gun put it all back together and the part that shoots the air gets stuck! please help

[evikecom]

You meant the nozzle? Please contact our tech for further assistance. G36 / MK36 series are a piece of cake and nothing to worry about because nothing is NOT repairable.

[ziwx]

thats really good.. bought one myself the other day.. do you have any tip on what to trim or make better.. ?

Already switched the battery to 9,2v and then bought a better charger..

Anything else..?

Thx for the disassembly guide btw :D

[ZingHighFive]

is there enough room in the battery compartment for a 9.6v? i got this gun from evike :) but i still dont know if one will fit, cuz i really dont feel like getting a peq box... :/

[roggerogre27]

i fit a 9.6 nunchuck in mine

[1337a1rS0fT3r]

the battery compartment is very small. Just get a Peq and youll be fine.

[cheasymonk]

you could get the stock that can fit a huge batter and it looks alot cooler plus it is colapsable and it folds

[daheretic666]

you can buy a large handgaurd that will house a 9.6 large battery but you will need to upgrade you're gearbox and spring if you wish to run a 9.6 large because the stock parts can't handle the fire rate!!!!!

[ziwx]

i bought a 9,6v battery and it fits fine :D

[mrfirstbase0]

could u show how to remove the inner barrel from the outer barrel and remove the hop up from the barrel. i cant find a video that shows how to do that anywhere. thanks

[JROD9496]

The KWA G36c is the best G36c on the market in my opinion.

[joedcmith]

the kwa is the best

[YoshiLover2012]

@JROD9496 SRC Gen 3 G36c for the win. KWA can suck my dick

[andromedarr]

@JROD9496 Ares is better, atz least internally

[megamanex888]

@andromedarr You're kidding me right? Ares's internals are known to suck ass and crap out on you, they have undefeatable externals though. Kwa on the other hand are known to have the strongest gearbox builds out of the box.

[andromedarr]

@megamanex888 No i am not kidding. The older ares models had partially Prometheus internals. Very Strong. KWA has shit internals. Flawed gear design, weak shell material, proprietary specs, shitty pistonassembly, and is only praised because they advertise their guns as lipo ready although they are not.

[CircusAndVincent]

that is a JG or Echo1

[hellraiser7400]

looks like a tm, classic army has less around the barrel assembly

[BloodHound4444]

Jing Gong G36C (G608) or what?