Extreme Maneuver - Unloading the Excavator

[carfreak8184]

I bet I could do it with four years and 364 days of experience.

[jaytrueisafaggot]

meanwhile on the set of Gold Rush Alaska

[bestamerica]

'

very good carefully drive this excavator,,,

but use 2 ramps are easily, faster. save time

[Animal7614]

i do that with my eyes closed just walk it off who cares not mine thats wat most of u fat fuck operators think anyway

[matty8371]

These STUPID FUCKS in these 4th world 'countries' can afford an excavator but cant afford a proper trailer to move it around........

[pokoz]

that was badass!

[PeGueVara]

son´t try this at home ;)

[astralman77]

thats some good skills right there

[Floydfan717]

yawn

[docrw]

to slow

[davmanderstrom]

I'm 21 and would have no problem doing this, just make sure you have enough fuel as to not run out at an angle as severe as that. Keep it slow and steady !

[1985hond125]

LIKE A CHAMP!!!!!!!!!

[noftchks1]

Pretty good operator with kingkong balls. And an engenius way to unload, but I think the hydraulics may be toast after that.

[beauchabot]

nice work, butt still puckered?

[Smullet90]

But can you play smoke on the water?

[Smullet90]

But can you play smoke on the water?

[77appyi]

dun that, i can positively say its ass nipping !!

[66MURDER1]

its not hard to do

[titov821]

I am a Russian excavator. My experience of 7 months. I unload the excavator HITACHI ex210 in this way almost every week. big deal !!!!!!!!!!!!!!!!!

[trackhoe1969]

not really a big deal for any decent operator which hes not. i put a 45 mini up on a loading dock

[smtoke]

for fuck sake HURRY UP!!!!!!

[CNCmachiningisfun]

I did this with a smaller excavator and a smaller truck, after gaining a total of only 4 hours of experience.

It seemed surprisingly easy. Perhaps it was just beginner's luck for me?

[TheBogarty]

nice

[TheBogarty]

nice

[floren111]

a real ..Artist,,,,!!!!!!!!!

[zgierzanin2]

the operator know how to balance the Excavator.

[GRUMPYPENFOLF]

i climb 4 & 5 foot walls in my 3195 every day with a power-claw demolition cutter on the sites i'm working at , this is baby piss and sloooooooow ,,,,,,,,

[N4435]

Only by the hands of minimum-5-years experience can carry out such an operation.

bullshit!!!!

[PureN3WZ3ALAND]

not extreme at all. i do it at every job i go to...

[ZeeZite]

Yes u can

[asshol3434]

you can unload but can u also load the truck ?

[CarlGustafEmil]

@asshol3434 yes,its same way

[JuggleFace]

Boss

[SONORAS100]

jajaja esta no se callo como en otro video que vi

[EyeRing100]

this is so cool

[andreaspsem]

what aaa F**K.....!!!

[SuperMartiini]

Just hit the pedal in the

medal :D

[88bigbyrd]

I wonder if he digs that slow. I took an entire shit before he got off that truck.

[adauto3000]

Serious and Simple People making incredible things! Thank you to share!!!

[andycflbulb]

2:25 I'd love to have my fort under there... with me in it... just need a bigger excavator.... maybe an ex200lc

[emanuellbruno]

Excelente operador hein,parabéns!!!!

[SweetGeorgiaPeach81]

Dayam Man!! That was F@KKIN awesome!!

[WafflesJr]

umm nice but why not buying the right truck...to unload it haha

[co0LAide]

it's so easy to put them back, a lot easier than putting them down! All you really have to do is press rewind play when no one is looking then put it up on you tube!

[zogg89]

thats a bad driver

[Flothyy90]

pretty basic maneuver... like it!

[skloubatos]

@Flothyy90

[LegionREd]

Bravo.. now if you can put it back on, I would be impressed.

[dekechemist]

Somewhere in the interior of north borneo



[tdhessg16]

@dekechemist I've done this before :) As long as you're aware of the angle the machine is on, and the space necessary before you touch the ground, it's quite easy to do :)

[tdhessg16]

@dekechemist to add to that, another good way to unload off something like that is to pick up a construction block at the full reach of the boom. Should be just enough to bring the machine up on the rear end, and totally safe!

[Mars7777777]

That's great! Where is it?

[realvanman1]

I would think that might exceed the engine's rated angle of operation. It must have a really DEEP oil sump!

[maxMODmin]

why the heck is there a "Jodie shakes her rump" video, 5th in my suggestions list??

Challenge Accepted.

[SirSkidPlank]

@maxMODmin it's 4th in mine, she must be moveing up in the world

[ozzy107]

How many tons is it in Kilos?

[powertoolification]

in Soviet Russia, excavator unloads you.

[hickrystyk]

Only carried out with minimum 5 years experience???? BULLSHIT.it's really not that hard. Watch the one unloading rail cars....thats experience.

[ConstructionCentral]

so thats how everyone learned that stunt with their RC Excavators

[mtjdearden]

WOW! Thats like so easy.....MTJDEARDEN my vids are hard as fuck

[itsThe740]

You call this extreme? Check out the vids of what a normal unload/load means for norwegian operators. It isn't hard to find the vids, just search for "Norwegian excavator".

[sommer1477]

Nice move.

[pontelloxd]

in galera

[lickMYgonch]

i'd like to see a woman do this hahahaha



[hounslowfinest]

thats just a very basic move on a machine. no biggy. lets be honest that piece of shit would benifit being just chucked off the end of the wagon anyway.

[andrewogara]

very good drivening,well dune lad.

[SpaceCronic]

i Thought hitatchi was a tv lol

[PeppieRD]

Not special, as long as the tracks can touch both ground and trailer its doable.

[Aleckbest64]

k..... szacun dla gościa :)))

[evadvalcourt]

loll that's not extreme at all ...

[Hexanuclear]

once its all said an done,, "Time to rip down forest"

[equallyeasilyfuqyou]

this is an easy move. i do it all the time in nyc.

[OffroadTrucker740]

minimum of 5 years? LOL. I was walking a komatsu 400 off a 6' ledge like that after 3 years experience. like the other guy said, its not hard.

[delete461]

tie it to a tree and drive the truck away really fast

[FDKEYS]

Just pray that a hydraulic hose doesn't blow!  If it does, you're f***ed.

[lorirocks777]

why don't people invest in ramps?

[graham640]

you are so full of shit my man anyone with atleast 2 years experience could unload that machine its not hard to do

[macedonio07]

MAÑOSO !!!

[bigdigger777]

Nothing special, standard way of loading or unloading. Just super jipo company.

[hwoods01]

Back the truck up to a pile of dirt, rock, or gravel. Then just drive it off. Makes the job that much easier..

[ThatKidKnows]

chuck norris could pick thatup with his little finger

[greeblie]

When I ran flatbeds as a trucker, I did this a few times. It's not easy, but no THAT hard...

[alloutperformance]

This was so slow I think my ice cream melted. 

[ImAwesome993]

I would not call this an "extreme maneuver" at all, its a pretty common method used when you dont have ramps..!

[yeaiblewitup]

just buy a trailer

[mstaff657]

It looked like the blind leading the retarded.

typical of inexperienced contractors.

[rkjpsn]

@mstaff657 did that look like the work of an inexperienced operator? that was a sure and steady hand.

[felixchaus]

@rkjpsn And he knew to keep weight point down he´s done it before and knows what he´s doing

[sarahyvonne25]

do this shit every day m8 this guys an amature

[willthis1do]

It's not difficult to do, you just need balls of steel!!

[PANCHO686]

fuking amaizing

[boardingpass04]

why dont you just back up to a bank and drive off? instead of being hard on your machine

[175yam1]

f..king great vid, cool

[raze10000]

at 18 i could do this and operated for 2 yrs, still only 19 now lol

[cade2477]

did you think of getting a body truck with a bartlett ball then putting a tag along on the bartlett ball then putting your buckets in the truck body????

[cade2477]

not meaning to sound like n ass or anything but im 13 ive been operating ecavators for a year now and i can do that on a pc 128

[2cv56]

Safety first I guess... anyway good job

[starsandbarsforever]

god dog. this is why i love the heavy movers.

[Big4x4]

not very complicated for someone with a bit of experience

[robehalv]

and what is so darn extreme with this ? it's standard procedure.

all though i've never seen anyone before using _that long_ time doing this

[2housetoa]

had to say you made that look hard.

[jacknivedoesdemo]

thats not extreme sliding your bucket along the ground is cheating and you take too long. but nice video and equipment

[brejso]

There's nothing special about that. I can do that and I haven't been operating for long at all.

[TheSpiceDareDevil]

sick dude you have skill

[3Mudbone1]

An accident waiting to happen. Great way to damage machinery and/or get injured or killed.

[dodgyplonk]

dont listen to the jealous fucks. that was awesome

[MrBigls]

That took 2 mins longer than it should of

[sonar17qb69]

lol dangerous manuver? doesnt look ne diff then ne other operator can do.

[ImAman555]

that was fucking sick. was it really necessary tho?

[josiahcampbell]

How many times have you had to replace that decking on the ass of the truck?

[martinov101]

year more like 5 weeks experience in 5 years u could be dancing with those machines

[chopkinator1]

he could've been a heart surgeon in another life, I'd love to try that but our health and safety rules in Canada would'nt allow

[TheZekerod]

never seen that before awsome!!!!!

[50mi55ile]

done this myself ..its not too hard ,main thing is to keep the boom low

[djmeo]

brake on truck was VERY important!! :P

[CozmoNz]

Lol @ 5 years minimum experience, thats not hard to do at all... Operators do it by accident when climbing off piles and not lowering the Boom as the excavator moves off.... (holding it upright like is done here)

[superkrotz12345]

that dont look that bad then again i cant say that ive done it before

[topofdaworld001]

good driving i must say

[hankhonker]

Good job

I'd like to see it get back on:)

[bufferbridge]

goes back on the reverse of coming off.jack up the front,reverse truck under the front of tracks,slew round ,jack up back and track on,simple,if you got the bottle!

[hankhonker]

For sure, just like a big hole where you need to make steps, its a fair bit of stress on the truck and digger rams though.

still a good vid .....Cheers

[dekechemist]

the operator replied this: the truck will be stationary, the excavator is the one need to move, the frontal track will be elevated followed by jacking up the rear

[dekechemist]

actually, it did get back on. But I did not record it. At some extreme, the excavator is maneuverable to be placed on top of the loader without a ramp.

[bockausten3266]

this guy needs a bit more practice

[jimbo10003]

i wouldent stand where that bloke is

[zalirahman2004]

malaysian logging industry

[dekechemist]

this is how it goes sir, in some remote area in Malaysia. Plus, this area is nearly inaccessible by truck loader.

[Bomberschmid]

ewrfdec