i know this video is litle old but i have some questions....
you was running with plastic head and no traking problem?
i have use the 3700 motor with 11t problem to solve this and i put the metal hub.you say that your head speed is 3030rpm right?i canculate with a program and tell me that with 11t pinion and 100%throtle my head speed is 3030....am i wrong?
Thank you for your comment. As you ca see in the end of the video I don't use gov. mode with the ace 40A ESC, but throttle flat on 100%. The trick is to set motor timing to HARD and lipo protection OFF. I now have a hk2221-6 scorpion motor on it with much lighter paddles making it much more exciting :D. I also put hitec MG servo's on it with longer servo arms for more cyclic/collective pitch.
Wow strak gevlogen! en je laat de snelheid van dit beestje goed zien! mijnes is onderweg, ben benieuwd, heb nu de Falcon 3d SE en tsjah dit is wel ff wat anders, ga zo door zou ik zeggen!!:D
circa 850 gram met alles erop (gy401 en s9257 en FP evo 25 2170mah). Standaard plastic kop zit erop. Alles is gewoon stock behalve de Radix bladen. Ik denk dat de video wel aangeeft dat 3d geen probleem is. Ik heb er nu zo'n 150 vluchten mee gemaakt, en ik heb maar heel weinig slijtage.
13T. With the Flightpower EVO25 2170mAh I get 5 minutes doing 3D. I still have at least 20% left in the lipo when doing heavy 3D. Motor pinion should not be too tight on the main gear and I have a nice and loose tail belt.
Thanks! Met die twee: You can't go wrong. De Mini Titan is wel wat stabieler en zit het hier en daar wat toegankelijker/handiger in elkaar. De onderdelen voor beiden zijn goed verkrijgbaar en relatief goedkoop. Behalve de stock bladen van de MT vind ik hem echt super, het slijt praktisch niet. De Trex vliegt iets "nerveuzer" en is iets lichter maar ook erg populair. Succes!
Thanks. No upgrades, all stock except for the rotor blades. I did put the trex plastic tail blades on it, but that shouldn't matter too much. GY401 + S9257, this combo is great (even in hard winds(although a little heavy) really worth the money. If your tail is no good, don't do flips and crazy stuff! Very big chance you crash. What gyro and tail servo do you use?
i know this video is litle old but i have some questions....
you was running with plastic head and no traking problem?
i have use the 3700 motor with 11t problem to solve this and i put the metal hub.you say that your head speed is 3030rpm right?i canculate with a program and tell me that with 11t pinion and 100%throtle my head speed is 3030....am i wrong?
nickosmal 2 months ago in playlist Περισσότερα βίντεο από τον χρήστη korsowdude
wow main blade ????
Tiber1979 2 years ago
radix 325. I also like to align 3k 325 CF blades. You should see it now with a scorpion motor on it :D
korsowdude 2 years ago
Awsome powerful pitch-works.
Really impressive...
How's your pitch and throttle curve set-up?
Are you using gov. mode?
joon6478 3 years ago
Thank you for your comment. As you ca see in the end of the video I don't use gov. mode with the ace 40A ESC, but throttle flat on 100%. The trick is to set motor timing to HARD and lipo protection OFF. I now have a hk2221-6 scorpion motor on it with much lighter paddles making it much more exciting :D. I also put hitec MG servo's on it with longer servo arms for more cyclic/collective pitch.
korsowdude 3 years ago
Wow strak gevlogen! en je laat de snelheid van dit beestje goed zien! mijnes is onderweg, ben benieuwd, heb nu de Falcon 3d SE en tsjah dit is wel ff wat anders, ga zo door zou ik zeggen!!:D
Greets Jerre
jeremycrosser 3 years ago
wat is het gewicht met accu?
en je vliegt hier met de standaard plastick kop? kan die een beetje 3D aan?
philipRCheli 3 years ago
circa 850 gram met alles erop (gy401 en s9257 en FP evo 25 2170mah). Standaard plastic kop zit erop. Alles is gewoon stock behalve de Radix bladen. Ik denk dat de video wel aangeeft dat 3d geen probleem is. Ik heb er nu zo'n 150 vluchten mee gemaakt, en ik heb maar heel weinig slijtage.
korsowdude 3 years ago
What pinion do you use? And how long can you fly on the lipo?
waterkip2 3 years ago
13T. With the Flightpower EVO25 2170mAh I get 5 minutes doing 3D. I still have at least 20% left in the lipo when doing heavy 3D. Motor pinion should not be too tight on the main gear and I have a nice and loose tail belt.
korsowdude 3 years ago
Ik zit wel te twijfelen tussen de mini titan of een t-rex 450. Je vliegt hem wel super man.
waterkip2 3 years ago
Thanks! Met die twee: You can't go wrong. De Mini Titan is wel wat stabieler en zit het hier en daar wat toegankelijker/handiger in elkaar. De onderdelen voor beiden zijn goed verkrijgbaar en relatief goedkoop. Behalve de stock bladen van de MT vind ik hem echt super, het slijt praktisch niet. De Trex vliegt iets "nerveuzer" en is iets lichter maar ook erg populair. Succes!
korsowdude 3 years ago
HOLY. yours helis a rocket.
paintballkidz 3 years ago
Hi, do u have any upgrades on this heli?? how does your tail hold so well? mine has some slop in it? does yours have any? thanks
ps: Nice flying skills hopefully going to do first flip this weekend
motoxmaniac93 3 years ago
Thanks. No upgrades, all stock except for the rotor blades. I did put the trex plastic tail blades on it, but that shouldn't matter too much. GY401 + S9257, this combo is great (even in hard winds(although a little heavy) really worth the money. If your tail is no good, don't do flips and crazy stuff! Very big chance you crash. What gyro and tail servo do you use?
korsowdude 3 years ago