Im not sure if im correct but carbs such as holleys have front and rear float bowls, edelbrock carbs have side mounted float bowls and you can get special 4x4 metering rods to, that have extra springs to dampen them so it doesnt flood the engine when on inclines etc.
hey guys i have an 89 4x4 toyota with a mid 80s model built z28 motor and 4 barrel carb. im having fuel issues when the truck goes up steep inclines it cant seem to get enough fuel. also i want to put headers on it but cant seem to find any that will fit? the steeering seems to be right in the way. do they make any that will fit or am i going to have to bust out the torch. email me freestylefightingsystems@live.com
hey guys i have an 89 4x4 toyota with a mid 80s model built z28 motor and 4 barrel carb. im having fuel issues when the truck goes up steep inclines it cant seem to get enough fuel. also i want to put headers on it but cant seem to find any that will fit? the steeering seems to be right in the way. do they make any that will fit or am i going to have to bust out the torch.
What all did you have to change? How much would it cost to do? I have an 86 and have the 22r but I wanna do the 350 swap. Thx for the info in advance.
@wes367 I don't have a 4.3 any more I sold it for 8200 and I bet I had less into it then your Sbc. And biggest reason your "chevota" sucks is way to much weight in the front now if you had allot of aluminum parts + a dart block then that would help but at huge costs.
@Jake92sc go read a booksounds like you need to kid.. 37s for all around wheeler are the perfect tire size for 22re yota with 5:29s reason being Max tire size stock axles can take locked up hoping on rocks and more clearance then obviously a "35" would give. Kid you don't know who your talking to. I started building cages,armor,3and 4. Links for these trucks, now I build sand rails welding up frames etc
you obviously dont know shit guy. My truck would run circles around your little 4.3, i've had this truck up to 80 on the road, walked through any trail i could fit through and been through mud deeper than your little 37s could handle so maybe you should stop talkin shit and worry about improving your peice of shit to be as good as mine
@NastyBuilt are you kidding me? this thing would go threw hella mud. 35s are just as good as fucking 37s. you need to go read a fucking book or some shit ass face.
got any build pics of this? im curious as to how you built the rollcage bed... all the boxes are rotted out on all the toyota trucks here, so im gunna build a flatdeck/rollcage style box, similar to yours.
hey can you send me the info too i will be starting to do the engine swap soon
TandA1724 3 weeks ago
Take that Americrap motor out of there & it will be fine...
madjimms 2 months ago
thats it ! show more of truck please.
moggierabbit 2 months ago
omg that just hurt MY wallet
Driftjunkie240 4 months ago
poor toyota...........he was never given a chance.
PLANETxGETxSWOLE 6 months ago
my gardeners make that same sound when they show up every monday morning!!
x3u93n3x 7 months ago
im building a 1983 toyota pickup and i would love to use this bed set up mine is all rusted out can you send pics and any info?
opmotocrosser 7 months ago
Im not sure if im correct but carbs such as holleys have front and rear float bowls, edelbrock carbs have side mounted float bowls and you can get special 4x4 metering rods to, that have extra springs to dampen them so it doesnt flood the engine when on inclines etc.
02uawitt 8 months ago
hey guys i have an 89 4x4 toyota with a mid 80s model built z28 motor and 4 barrel carb. im having fuel issues when the truck goes up steep inclines it cant seem to get enough fuel. also i want to put headers on it but cant seem to find any that will fit? the steeering seems to be right in the way. do they make any that will fit or am i going to have to bust out the torch. email me freestylefightingsystems@live.com
newportkagen 8 months ago
hey guys i have an 89 4x4 toyota with a mid 80s model built z28 motor and 4 barrel carb. im having fuel issues when the truck goes up steep inclines it cant seem to get enough fuel. also i want to put headers on it but cant seem to find any that will fit? the steeering seems to be right in the way. do they make any that will fit or am i going to have to bust out the torch.
newportkagen 8 months ago
that truck is SAVAGE. what kind of axles are those under it?
Dry8Ice 8 months ago
ultimate crap vid man seriously
9574mitch 8 months ago
What all did you have to change? How much would it cost to do? I have an 86 and have the 22r but I wanna do the 350 swap. Thx for the info in advance.
wowza872003 9 months ago
bad ass truck!! check out my BBC Tacoma
tklankustoms 9 months ago
@wes367 I don't have a 4.3 any more I sold it for 8200 and I bet I had less into it then your Sbc. And biggest reason your "chevota" sucks is way to much weight in the front now if you had allot of aluminum parts + a dart block then that would help but at huge costs.
NastyBuilt 1 year ago
@Jake92sc go read a booksounds like you need to kid.. 37s for all around wheeler are the perfect tire size for 22re yota with 5:29s reason being Max tire size stock axles can take locked up hoping on rocks and more clearance then obviously a "35" would give. Kid you don't know who your talking to. I started building cages,armor,3and 4. Links for these trucks, now I build sand rails welding up frames etc
NastyBuilt 1 year ago
This truck won't
Mud,crawl,drive for shit a stock
Motor geard I. 37s will go places
This thing will never see moron leave chev's in chev's and a vortec (4.3) would have been more effective
NastyBuilt 1 year ago
@NastyBuilt
you obviously dont know shit guy. My truck would run circles around your little 4.3, i've had this truck up to 80 on the road, walked through any trail i could fit through and been through mud deeper than your little 37s could handle so maybe you should stop talkin shit and worry about improving your peice of shit to be as good as mine
wes3671 1 year ago
@NastyBuilt are you kidding me? this thing would go threw hella mud. 35s are just as good as fucking 37s. you need to go read a fucking book or some shit ass face.
jake92sc 1 year ago
does the 350 fit rite in the truck? i got a 87 and im lookin 2 put a 350 in mine
superbacon28 1 year ago
what t case and tranny did you use did you get the bellhouse convertion or go with chevy?
disass6 1 year ago
@disass6
i used a chevy turbo 350 with a 205 tcase
wes3671 1 year ago
cool truck but what is with those rear shackles?
hillbilly93yota 1 year ago 2
got any build pics of this? im curious as to how you built the rollcage bed... all the boxes are rotted out on all the toyota trucks here, so im gunna build a flatdeck/rollcage style box, similar to yours.
Thanks bro
analog56x 2 years ago
well the he bought it as a kit i can get the info if u want let me know i got a few pics from when we were welding it together
xmotocrazyx19 2 years ago
for sure bro, i'd love to see some build pics!
analog56x 2 years ago
@analog56x they come out of holes cut in the post and welded to the halo of the cage and down to the rear part of the chassis
ojoj626 9 months ago