Polaris Outlaw Final Project

[cheesyrice7]

So would this be a quad that gives the other quads like yfz and ltr a run for there money?

[toxhawk]

@cheesyrice7 yeah i think it would do just fine, when this was stock motor and pipe and jet kit it would take out a raptor, after what i did to this now nothing stock can hold with it

[Fronk0]

What bumper is that?

[toxhawk]

@Fronk0 i'm assuming front your asking about it's a polaris one

[ihitatree]

the music just dont go with the quad! haha

[ReignForever]

im not a hater! lol think the quad is very nice but your never done modding! there is no finished product! i see plenty of stock parts on there! what do you have in it for engine ups? just the bigbore?(im just wondering im NOT hating)

[toxhawk]

@ReignForever well it was a finished project for me since it sat in my garage for over a year before i had it all done and now i dont ride it. Well the parts that were switched out were a new frame and the rear control arms and spindles were machined out to make use of the needle bearings that the newer ktm models have side plastics were off of a newer red ktm machine got new black plastic seat is from a outlaw stealth model all parts but new frame were powder coated.

[toxhawk]

@ReignForever motor was torn down to make way for bigger piston and heads were treated to a port job along with oversized valves and more aggressive cam edelbrock carb had that before the motor mods doesn't really work for what i have now and still haven't found anything to work for a correct tune and e85 grab bar heal guards nerf bars fan scoups handle bar all aftermarket coil pack and spark control modual isn't stock anymore and has full hmf exhaust along with front shocks from a ktm straight

[ridin4life100]

@ReignForever Thats his own final project when he decided he done so leave him alone.

[darthnater22]

ur chain is rusted lol

[toxhawk]

@darthnater22 yeah that thing makes it look bad should put my new one on that's a stock oem chain for ya.

[polarisoutlaw28]

no i was just looking into buying the front ones because the paint started someing of and on the bottom right a-arm its bent so i was looking and your video and thought u bought both your front and back a-arm's but i guess u just powder coated them, and you said u bought the seat from polaris was it at your local dealer or was it on an online catolog

[toxhawk]

@polarisoutlaw28 if your know someone who does powder coating that's a good way to keep the paint on but it's still going to chip a bit if your getting peppered with rocks up front most of the time it will just kind of bend the paint but you probably be able to pick up a used set of a arms on ebay or something and the back depending on what year you have you can upgrade to the needle bearing ones mine didn't have the needle bearings so i had them machined to accept newer style a arm bearings

[toxhawk]

@polarisoutlaw28 the seat i bought was just the cover it was purchased at my dealer so i used my old seat itself and just put the cover on and then i bought an another seat on ebay for when i race so not to wreck this one since the cover alone cost i think over $100 . The quad as you see it in the video cost me with everything on it + the quad itself probably over $14000

[polarisoutlaw28]

@toxhawk yeah well $14000 but look how nice it looks and how did u start raceing then because dont you need all the number plates and everything.

[toxhawk]

@polarisoutlaw28 how did i race? I have numbers on the side of the fenders most of the time that's good enough but if they want more i zip tied a plate on the back

[polarisoutlaw28]

@toxhawk but how did u start raceing like was it just in the family or did you get sponserd by a company?

[toxhawk]

@polarisoutlaw28 just raced off my own dime and time when i could just around the area mostly don't really race anymore since dont have time to pratice and to many other things going on. Sometimes think i should sell the quad since everything i've done to it i probably didn't even put 6 hours on the machine so it's practially brand new

[polarisoutlaw28]

@toxhawk you should wait a couple of monuths and see if things get better or worse if they get worse then just sell the quad.

[polarisoutlaw28]

@toxhawk do you remeber where you bought the big bore kit for the polaris, and do you know if the dealer by you that you bought the seat cover or seat has a website because i was looking all over the internet and i couldent seem to find a seat cover like your's?

[ReignForever]

@polarisoutlaw28 ebay! there are companies that sell brand new stock but only on ebay or their website which you will FIND on ebay

[polarisoutlaw28]

Hey i was looking into spending some money on mine and buying all new parts. Do you know where to buy polaris outlaw parts?

[toxhawk]

@polarisoutlaw28 what kind of parts are you looking to buy?

[polarisoutlaw28]

@toxhawk i was looking into buying the front and back a-arm's, shocks, exhaust and some other parts.

[toxhawk]

@polarisoutlaw28 there was a company out there at one time that made extended a arms for the outlaw but i dont know if they still do the ones you see on my quad are stock that are just powder coated the shocks are from polaris i have on mine it would be the ones you see on the straight axle model on the front exhaust is a full system and that's a matter of preference to you i will let you know you need some grommets or something to keep your muffler from cracking went threw that already.

[polarisoutlaw28]

@toxhawk so you just powder coated ur a-arm's and bought knew shocks from polaris. Did u go to the polaris dealer or did u order from an online catolag?

[polarisoutlaw28]

@toxhawk so yours where powder coated, and do u no what the name of the business that made the a-arm's?

[toxhawk]

@polarisoutlaw28 yes mine are just stock a arms and i took them off and had them powder coated. I have to look in my bookmarks on my computer to see if i saved the link at all but for some reason i think it was a company in fargo north dakota that made them just for the front of course since the back ones you would need longer axle shafts but if your after wider you can either go with different dish rims or wheel spacers.

[footballjag]

how fast does it go?

[toxhawk]

@footballjag not sure haven't maxed it out have some tuning problems so far had 77 mph on the trail tech but my friend said it should be faster due to we both have trail techs and his is suppose to be right on with a car's speedo and when we ride next to each other i'm always showing slower. i would say if i could hit my high rpm perhaps 83 to 85 tires vibrate so much though

[JPO1292]

Very nice quad. I have the same thing except KTM powered. It has more speed and power, but good job on the look of your machine.

[toxhawk]

@JPO1292 My motor is modded pretty serious i'm pretty sure it's got more power than a stock ktm motor

[JPO1292]

@toxhawk Thats pretty cool. What did u do to it?

[toxhawk]

@JPO1292 bored it out to be around 558 cc and high compression piston 12.5:1 ported the heads with oversized valves put a mild cam in it also

[869piotr]

what is the name of the song

[420choky]

just got mine .. im all late .. hahaha

[metaltera86]

i would totally buy that

[toxhawk]

@metaltera86 how much your looking to spend on one?

[toxhawk]

need some advice on a starting point for tuning this quad for E85 like what carb to use and what jets should i start with

[Xxslayer410xX]

man that chain is rusty dude and how hard is it to change a back sprocket on that irs thing...

[toxhawk]

@Xxslayer410xX yeah the chain is pretty rusty looking but it's got enough chain wax on it must just be a cheap chain polaris used it's still stock the rear sprocket isn't hard at all to change probably take an hour to do it.

[miradfx]

Beautiful !!!

[421411]

beast

[dson420]

Man you did a great job on it did you do the work yourself?

I am currently building mine just got everything back fron PC..Anyhow 2 thumbs up!

[toxhawk]

@dson420 yeah I did the work myself get more pride in it that way. Anyone know what type of carb i should run for an E85 tune and what types of jets to start with?

[spitfirenick]

that quad is just too hot way better than any of my yfz's i own im thinging a outlaw is gonna be a next quad

[0000084595]

not goin to lie this is the gayest music i have ever heard.

[wulfmaer]

Get some oil on that chain ! Lol!

[toxhawk]

@wulfmaer lol that does look pretty bad huh. everythign else is so nice and then you look at the chain. I have a new one still in the box maybe i'll just put that one on seems like those polaris chains get rusty like right away. I use that chain wax instead of any type of oil perhaps that's the reason.

[walston410]

@toxhawk na we use chain wax too thats the good shit

[sledneckFORlife]

that looks so sweet but dont you burn ur leg on the pipe i burn my leg all the time and i have a guard on my 2006 outlaw

[JWALES011]

dude, were did you get the nerf bars? and does the hmf elliptical pipe sound good?

[toxhawk]

think the nerf bars are pro armor i've had some other ones before and well they worked great but didn't fit right and they ended up breaking my frame check out my other videos for the sound of the pipe but i think it sounds sweet cause the predator has same motor but the pipe i think is round hmf has and you can surely tell it sounds different

[craracing262]

How are the gncc's holding up?

[toxhawk]

boy i'm probably going to feel dumb by asking this but what are gncc's?

[BoyGotBlazed420]

that thing is the shit, u can tell because of the fly that was on it. lol

[toxhawk]

thanks man even flies can't keep off of it lol question to all the viewers I have a problem with my carburetor and wondering if anyone has a suggestion of which is a good carb to run this one i have doesn't work for the modded motor

[PolarisDragonman600]

what kinda rims r them?

[toxhawk]

they are the stock ones just powered coated black

[walston410]

yeah thats the other thing about them i hate them things

[walston410]

dude the only thing i would do to that is get ride of tham shock covers all they do is colect dust

[toxhawk]

they are just for looks and really muddy conditions other than that they stay off cause they seem to get pinched in the spring so easy

[Modded25]

i think the best upgrade is the license plate lol

[toxhawk]

yeah but i dont ride it on the streets anymore cops dont really like me or it had some issues in the past lol

[Modded25]

where do you live

i live in TN and the cops dont give a crap

i rais hell on my outlaw

[sjw787]

whoa thats sweet!! where did you get those a-arms?

[cball9779]

what one soooo bad!!!!!!!!!!!

[toxhawk]

Thank You all for your positive comments

[DanteDaDrummer]

looks great

[sledneckFORlife]

looks sweet