Some people are so freaking dramatic! This guy certainly doesn't know what he's talking about, but you CAN run a pump dry for a few seconds without damage (Don't do it on purpose). I accidently ran mine for about a minute with my inlet ball valve closed and never had any damage to my pump. Still using the same washer everyday and its been a year since I did it. Crazy Huh!
yea so put your hand on the plastic air box so you break it. Also no engine smokes on a cold start (it should not smoke at all) unless this guy put the engine on its side. DO NOT RUN any power washer dry like that even for a little while you will ruin the pump. I would like to know how many people have ruined there power washers because of this guy.
@workensmart who is this knucklehead.......a pressure washer salesman?? Dry run it first folks......then come see me, because you burned up your pump and I would be happy to sell you a new one!
@Mentorcase Oh shit, i just got a honda generator for free and i started it up with no water or anything attached to it. Does that mean its broken now?!!? I dindt have it on for very long. I'm worried now.
@VTwanderer If I were you I would just connect the water turn on the tap and press the trigger on the gun without starting the motor and wait till all the air bleeds out through the gun nozzle. Then try starting it and see if it works with water running through. I hope you got lucky, If not maybe you can get away with replacing the seals and didnt toast inside the pump.
Never start a pressure washer without attaching the water supply as you will burn up the water pump. See instruction manual.
yakdung 6 months ago
guys make sure u never run a pressure washer with the water off it will screw ur pump. BAD IDEA
123buttnut 7 months ago
blue smoke=burning oil that isn't normal for a 4-stroke
PS: u have alot of video's
daand12 8 months ago 2
@daand12 Blue smoke is normal for a cold start. Even for a 4-stroke.
CronicAAA 8 months ago
@CronicAAA thats not true at all
danilianian 7 months ago 2
@danilianian Actually it is. By cold start i mean when you left it sitting for weeks on end.. So Yeah actually it is.
CronicAAA 7 months ago
@CronicAAA actually no
danilianian 7 months ago 3
It's Joe Dirt.
RainJetSprinklers 9 months ago
i watch this agein for the laghfs of how stupied and clueless amricans are
xxxbmxerxxx1 1 year ago
it's David Lee Roth
kymbo72 1 year ago 3
Some people are so freaking dramatic! This guy certainly doesn't know what he's talking about, but you CAN run a pump dry for a few seconds without damage (Don't do it on purpose). I accidently ran mine for about a minute with my inlet ball valve closed and never had any damage to my pump. Still using the same washer everyday and its been a year since I did it. Crazy Huh!
tac1ems 1 year ago
Nice boots douche.
allstar12hockey123 1 year ago
yea so put your hand on the plastic air box so you break it. Also no engine smokes on a cold start (it should not smoke at all) unless this guy put the engine on its side. DO NOT RUN any power washer dry like that even for a little while you will ruin the pump. I would like to know how many people have ruined there power washers because of this guy.
workensmart 1 year ago
@workensmart who is this knucklehead.......a pressure washer salesman?? Dry run it first folks......then come see me, because you burned up your pump and I would be happy to sell you a new one!
hpygolkyone 1 year ago
@workensmart dork papas pressure washer started with it onthe aiir filter
egreene27 1 year ago
@egreene27 What the hell did you type?
workensmart 1 year ago
thats a honda for ya
Penguinboy1995 1 year ago
I was almost sold on one of these washers until I heard how obnoxiously loud they are.
I'll continue to go to my local car wash!
gravelandgrain100 1 year ago
Start it without water and its too late damage done.
Mentorcase 1 year ago
@Mentorcase Oh shit, i just got a honda generator for free and i started it up with no water or anything attached to it. Does that mean its broken now?!!? I dindt have it on for very long. I'm worried now.
VTwanderer 1 year ago
@VTwanderer If I were you I would just connect the water turn on the tap and press the trigger on the gun without starting the motor and wait till all the air bleeds out through the gun nozzle. Then try starting it and see if it works with water running through. I hope you got lucky, If not maybe you can get away with replacing the seals and didnt toast inside the pump.
Mentorcase 1 year ago
my brother in law was hurt using a pressure washer yesterday it exploded he was injured bad. so be careful using theses things
cuppie27 2 years ago
OMG. Are you kidding me? I feel like people are going to jump out and say APRIL FOOLS!!!
dejaybrock1979 2 years ago
you have to purge the pump of air by running water through it. then you can start the engine. you ruining your pump.
mt900r8 2 years ago
your suppose to start it with the water so it doesnt burn out the water pump
ipete6 2 years ago