How to tune ILS manually PMDG 747

[ISeeThemComing]

nice dude ) how did u get such a realistic ATC voices.....or did u play online???

[Evertie2]

@ISeeThemComing FS2004AviationPro here :) I recorded the voices from LiveATC dot net!

[meetMr7]

Thanks for the help Evertie

[Evertie2]

@meetMr7 FS2004AviationPro here: No Problem!

[hakan737]

hi there, the same question, ATC chatter comes from any other external source such as liveatc archive mp3 or did you use any addon for that?

thanks

meanwhile, it was nice approach and landing.

[Evertie2]

@hakan737 FS2004AviationPro here (New Channel), I recorded it from Liveatc indeed!

[jordan4541]

you see where you put the freq, mine says PARK i tried deleting it but it said invalid entry.even when i just try to replace it with the freq. has it appeared with you before.

[Evertie2]

@jordan4541 FS2004AviationPro here (New Channel), Nope, it should work!

[jordan4541]

@Evertie2 ok thanks for he reply though :)

[benzipz]

hey this is the onley vid i got it working on thanx :)

[Evertie2]

@benzipz FS2004AviationPro here (New Channel), Thanks for watching!

[DHMaNiAc770]

how did you get the extra atc voices?plzzzzzzzzzzzzzzzz tell

[Evertie2]

@DHMaNiAc770 FS2004AviationPro here (New Channel), I recorded it from Liveatc.net!

[Rafal102able]

it is fs2004?

[Evertie2]

@Rafal102able FS2004AviationPro here (New Channel), Yes.

[Rafal102able]

it is fs2004

[andyquez]

Is the atc sounds real or an addon ? :) sounds like real ! :D

[Andrew89898]

@andyquez It's probably online ;)

[Evertie2]

@andyquez FS2004AviationPro here (New Channel), Correct, real ATC recording :)

[KubeckDK]

Thanks! It really helped!

[Evertie2]

@KubeckDK FS2004AviationPro here (New Channel), I'm glad it helped! Thanks for watching :)

[lsuperior]

thanks, i know im stupid when it comes to 747 but where is the master switch on that. and the via knob thingy.

[Evertie2]

@lsuperior FS2004AviationPro here (New Channel), the master switch is located on the right side of the Mode Control Panel.

[lsuperior]

oh well here what happens, i go on the buttons wouldnt even light up or anything if they do they dont do anything

[Evertie2]

@lsuperior First turn on the Autopilot master switch and try to move the heading knob via the 2d panel. Hope this helps :).

[lsuperior]

i would be in the air and it still wont work even if the buttons are lighting up

[Evertie2]

@lsuperior Sorry I don't know an answer for this. Try the PMDG forums or a re-install ;).

[lsuperior]

why wont my heading, speed and altitude hold knobs won't work. yours do.

[Evertie2]

@lsuperior You could check if all the electric settings are okay? So your battery isn't discharging.

[StefanAerodrom]

nice video

i have a question

is there a way to set the ILS frequency without the fmc??

[Evertie2]

In the 747 there isn't, but in other aicraft like the 767/757/737 there is a small ILS tuner in de pedestal.

[betterdenu452]

does cloud9 eham work on vista 64 bit?

[Evertie2]

Sorry, I don't know. I use 32 bit.

[Evertie2]

It says you need Windows XP, it works for me on Vista 32 bit. You could try to install the Demo version and see if it works on Vista 64 bit.

[herrehful]

Dank, weer 'n weetje

[sunckc]

ok i think it might just work.. i will give it a try. i do understand u need to do heck alot of things like programming the waypoints, takeoff speed into the fmc. trouble is, i m not good in inputting the nav points from the sids/stars chart. thanks again! let u know if i need a video. :)

[Evertie2]

@sunckc FS2004AviationPro here (New Channel), No Problem!

[Evertie2]

@herrehful FS2004AviationPro here (New Channel), Geen probleem :)

[TwanFS2004]

Goede handleiding! Ga door met video's maken!

[Evertie2]

@TwanFS2004 FS2004AviationPro here (New Channel), Zal ik zeker doen Twanus!

[bianchikolk]

Okedan..... Thx great to know=) Bedankt he:D

[bianchikolk]

Just change the screen size but.... A question for you... you still have to do the altitude yourself right??

[Evertie2]

No, you don't have to. Just press the approach button and then when the AP captures the glideslope its descending by itself. You don't have to do anything with an autoland. Except the reverse thrust ofcourse.

[AddictedFreakie]

mooie landing!

[Evertie2]

Thanks, welcome to my channel ;)

[sunckc]

hi do u know how to engage the autopilot during takeoff? i am not able to execute the throttle speed, heading and the altitude. any ideas?

[Evertie2]

Simply just click on it ;). You must be sure you have everything set for takeoff before takeoff: The heading (LNAV), the speed and the altitude. You don't have time to set this all during takeoff. So when you are airborne you engage the autopilot and the speed and that's all.

[sunckc]

meaning, i can only make it work when i am airborne? bcos when on runway, it can't work regardless. only the vertical speed able to. thanks for your prompt reply!

[Evertie2]

Yeah, the autopilot will only work when airborne. You can takeoff automatically but then you have to a lot of things to make it actually go airborne. So best thing to do: Takeoff manually, when passing about 1000 ft switch on the autopilot. When you need a video, please post a video request ;).

[Evertie2]

Question for you guys, how can I get the black bars on the side away when uploading something in HD?

[FLIGHTCOMPANY]

You have sony Vegas? If so, look at my tutorial on how to make HD videos.

[Evertie2]

No I don't