Monster Truck Bends in half

[BoatManBeats]

Seems the drive shaft actually sucked the frame down when it twisted... yikes!

[B1AcKoUt21]

Notice Dislike Bar.

Leave.

[001GenLee]

That's alot of weight to pull! It's amazing what the other trucks and tractors can do with that weight without even breaking!

[hardpakage66]

Love the truck. Check out my truck at hardpakage66.

You'll be pleasantly surprised

[dallasabn]

& you white people say us black people blow our money on stupid things

[titan56l]

@dallasabn you are being racist i guess a shitty car with 26s that will be down for the count if you hit a pot hole isn't appealing haha just sayin...

[sparkygl0s]

@dallasabn

I didn't even notice the driver was black To me its not relevant.

[mopar7redneck]

Ahh good old Chevy frames. Made out of balsa wood :/

[FPSTed]

Someone needs a new driveshaft

[SPIDER]

@DetroitDieselBob

since Ford was the first mass manufacturer in American they were able to close in deals with the government for law enforcement and security transportation, that's a fact.

[1MudDobber2]

Monster Truck or Monster JUNK?

[awesomegokart]

you cant even spell laughing or laugh............ok maybe he needs a life but you need an education

[anthony1bad351]

@1oldskoolluvr ya uummm my bad I was to busy loughing at this vid just as I lough at computer trolls just like you!!! pppfffttt get a life pussy!!!

[AfrikaaBombeetza]

@DetroitDieselBob because its cheap and made in the USA? thats why they use it...

why dont the american military use the XM8 instead of the m4? because the m4 is made in america and is cheap.

it doesnt change the fact that its made in a non innovative society and will break eventually, and is made with shitty parts with a shitty design

[rangerRZR1]

i dont get how even on videos that have nothing to do with comparing trucks, people still try to say that their truck is the best in all of these comments. who gives a fuck?

[jickrider]

I had a 99 stroker with 420k and have 2 more in the driveway that are pushin 300k and still kickin

[jorge699686]

OOOO MY BACK, MY BACK MY BACK JAJAJAJAAJAJ

[chuck5166]

Ok fords suck

[MitchMAH]

disappointed

[dend8991]

FAIL



[Burtocd]

@TheEvilkiller21 Yessir, and anybody that denies Ford having the most dependable truck is an idiot. My daily drivers right now are my 1990 F-150 with the 4.9l I6 and a '96 F-350 with the 7.3l in it. Neither truck has let me down and the F-150 has right around 250k miles on it. I did have to replace the shocks on it last year, but that's to be expected

[KingTroIl]

I DONT FUCKIN GET IT.

[TheEvilkiller21]

@srtrcr ford is the most dependable truck, my dad has had an f-150 for 14 years and only puts in about $1,500 a year so fuck off ford has the best trucks

[dirtymodevil12]

@TheEvilkiller21 fords are not the most dependable truck. any truck is. it just depends on how you maintain it and keep up with your maintenance on it. my mechanic has 437,000 miles on his 99 ram 3/4 ton. and i know powerchokes... i mean powerstrokes that have close to 400,000

[D12caterpillar]

@TheEvilkiller21 ok, my dad has had a 78 chevy for 2 years and put maybe... 150 to200 into it, and it drove and ran great

[kx519]

@TheEvilkiller21 My truck is an 84 and i spend ~800 a year in oil changes and other maintenance. So by your logic, mine is better.

[Hemi4127]

@DetroitDieselBob no ?lol

[Hemi4127]

@DetroitDieselBob hey moron you know why all those engines are placed in the said equipment .becuase someone won a bid for a job

[kevin6154]

Bummer! I'm a ford guy but that was a nice truck.

[jasta961]

what do you expect?...ITS A CHEVY!!!

[07ptrblt]

Looks cool..but physics are out. I want to get to the shop and build a pro mod SMOKER!!!

[1986fordshasta]

Wow

[XtremeColtM1911]

i guess this answers my question of "will it bend"

[srtrcr]

@DetroitDieselBob Umm Actually I work on them and keep them running along with all the other equipment. I could never sit in a office. And I do go inside engines. They really arent that complicated. And I stand by my comment. Ford is the bottom of the barrel. The only reason they are so popular is because they are the cheapest. The government wouldnt buy the best. They take bids for a fleet purchase and buy the lowest bid. Ford sucks man. Face it. They are junk.

[TheLionRichard]

@srtrcr Why are they junk? I'm actually curious and don't mean to criticize, what specifics in ford is junk and what are you comparing them to? I'm just asking because I'm considering a f-150 raptor.

[Kawasakiforlife7]

@TheLionRichard dont do that, the raptor is junk. and the 6.0 is junk. the 7.3 was an alright engine though

[TheLionRichard]

@Kawasakiforlife7 But what exactly is junk with it? Poor head screws? Bad cooling channels? Weak shafts? Or is it in the drivetrain?

[dutchiman1]

@TheLionRichard the raptor in no way is junk. Its ahead of the curve for production vehicles. There have been no problem with any raptor yet and you can research that. srtrcr doesnt know what hes talking about. If your considering it i urge go for it you wont be disappointed

[madjimms]

@DetroitDieselBob Because they had to choose between the 2......

[bigdizz1e]

@DetroitDieselBob

"Powerstrokes" are not built by Ford. They are built by Navistar.

[MrRacinGas]

@bigdizz1e This is 2012 buddy as of 2011. The Powerstroke is now PURELY Ford engineering.

[halocop159]

that is why you never own a chevy haha

[srtrcr]

If he hadnt built his truck to compensate for his little penis that wouldnt have happened.

[MultiAREE]

@srtrcr Well, someone certainly has insecurity issues XD Like half of your comments on videos are about how much you hate niggers haha.

[srtrcr]

@DetroitDieselBob The reason they are used in all those applications is because they are the cheapest. NOT because they are the best. Its the same reason I use fords at my company in my fleet. Fords arent all that great. They are the bottom of the big 3 in terms of quality. But they are the cheapest. Thats why they are used everywhere. Stop fooling yourself. I have owned and used and abused all the trucks out there. And ford sucks.

[farmerallis]

And this is why you don't pull with lifted trucks. Creates way too much leverage. Fucking dumb asses; good to know they didn't pass physics class in high school.

[KohlfromSD]

@DetroitDieselBob idiot

[anthony1bad351]

I ment 4.9

[anthony1bad351]

@raginroadrunner im a ford guy my self but wen in hell did 271 cubes become 4.7 liters?

[anthony1bad351]

@johnvdm13 no no its

Cracked

Head

Every

Valve

Roller

Lifter

Every

Thing!!!!!

[TheKvette007]

@anthony1bad351 if you're going to correct, you really should do it correctly. hell, i'm a chevy guy and i know this. Cracked Head Every Valve Rattles On Long Extended Trips at least get all the letters in next time!

[dutchiman1]

@TheKvette007 haha i got one for you,not sure if you heard it yet but. Constantly Having Every Vehicle Recalled Over Lousy Engineering Techniques.

[1oldskoolluvr]

@anthony1bad351 hey dip shit, learn how to spell if you're gonna try & slag another brand.

i'm gonna guess you were trying to hate on chevrOlet? (figured i'd put the "O" in caps, since you forgot how to spell it)

:P

[fredd5503]

@DetroitDieselBob actually now all the ambulances are switching to chevy

[0404wesley]

Damn that's a sweet engine!

[12345mike6789]

cool truck

[johnvdm13]

CHEVY= Cheapest Heap Ever Visioned Yet

[wolfram00777]

If this was a 'Furd' it would not have happened because the Furd PowerJoke engine would have blown up.

Why is Furd blowing out spark plugs, ignition fires, diesel FAILURES, transmissions in the new ECO-TURD failing because Furd's are JUNK.

[chadabooo]

@wolfram00777 you look like a retard,

[Alexl2002]

@wolfram00777 RETARD slap a 7.3 powerstroke in dat thing and I'll rip your ass off

and I see more gmc's towed than fords (90% of wreckers are fords).

LEARN TO SPELL FORD FREAKING STUPID GUY!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!

[johnvdm13]

@Alexl2002 GMC? do you mean Gay Mans Chariot

[Alexl2002]

@johnvdm13 hahahahahahahaha!!!!!!!!!!!! LOFUCKINGL I just laughed my ASS off!!!

AND YES THATS WHAT I MEANT!!!!

YOURE AWESOME!!

[johnvdm13]

@Alexl2002 hahaha thanks man hope you have a good one 

[brapboys503]

@Alexl2002 Don't be a biased idiot. This is 2011, not 1951.

[chasejohnston1993]

@Alexl2002 dat?

[disorderlyconduct97]

@wolfram00777 im a chevy fan, but fuck off no one gives a shit everyone can support the brad they like, for whatever reason they like, bitch

[152jay]

@wolfram00777 dude you are just retarted, kept it short and simple

[subbmage32349]

@wolfram00777 You just made yourself look like a idiot bro

[1oldskoolluvr]

@wolfram00777 you sir, are what we like to call a "Tool".

[nathan86792]

if it was a F.O.R.D that WOULD NOT HAVE HAPPENED

[Tboninator]

Frame bent. Ladder bars are retarded... 4 link would have been more appropriate for a truck this tall because ladder bars are supposed to assist the springs in keeping the axle from rotating. Single bars on either side are not strong enough, and the angle they're at probably assisted in bending the frame- fulcrum. Truck isn't toast, though. These trucks should be running roll cages as I'm sure many of them aren't just "pulling" trucks- this'll give him the opportunity to back half and cage it.

[SMiller5488]

Yes the ladder bars bent, then the frame bent, truck is toast...

[volodymyrm1]

bye bye frame 

[raykeens]

the ladder bars bent. the rear rotated thats all

[hpjunky70]

@Deathadder097 Damn close. Frames junk.

[rebelracer77]

this is exactly why truck pulling is the worst sport ever

[IAMCORNDOG123456]

Ummmm...thats the drive shaft bending......not the truck.

[IAMCORNDOG123456]

@IAMCORNDOG123456

Ok, not the drive shaft. Still, truck didn't bend in half.

[Mr7475ih]

Ahh Shit!! I wanna get mad too!! All this talk about bankrupt and Chevy did this and Chevy did that and Ford maybe did this just aint doin it for me.Im gonna go somewhere else and see if I can get mad.

[20cricket09]

VVVVVVVVVVV...longest comment argument in youtube history right below this one...VVVVVV

[theKOchannel]

@Raginroadrunner

sorry to say Chevrolet didnt make the part that bent, obviously whoever made it was junk.

[raginroadrunner]

@theKOchannel .the last good Chev truck was 1959..ever since that time all they have made is junk...and they went tits up...

[sokodad]

@raginroadrunner I see your living in a fantasy world. When you come back to reality do a little research before you make your next comment.

[raginroadrunner]

@sokodad .the US Border Patrol tried GM vehicles...and very quickly went back to Mopar....."FACT"...

[sokodad]

@raginroadrunner I don't know where your at, but the border patrol where I'm at uses all Chevy so does the military and most government agencies. The military units that check on and maintenance the missile silos all drive Chevy....FACT.

[raginroadrunner]

@sokodad..There has been an increase in GM purchases to Government agencies due to the fact that GM is pricing these vehicles at less than 2% over absolute cost. Due to a lack of funding the agencies had no choice but to buy them. GM, under the gun for repayment of loans,had no choice either. Ford is laughing their asses off ..Chrysler is also and is doing so well with the Dodge trucks and Jeeps...they could care less..and the Fords F 150 got truck of the year. GM fills the salvage yards again.

[sokodad]

@raginroadrunner In case you didn't know it, Ford nearly went bankrupt in 09. The government enacted a $25 billion energy bill of which Ford took $5.9 billion. They were all hurting back then. Chevy sales are up just as well as Dodge. Your trying to slam Chevy while making Dodge look good. Dodge took the buyout also and is now owned by Fiat. Don't preach Dodge to me while slamming Chevy. Ford makes a nice truck I'll give them that. My cousin works for Chrysler. Like I said, we own all three.

[raginroadrunner]

@sokodad ..hold on Dude...Ford sold off companies to get in position before GM went under. Ford restructured their product line and as far as Ford taking funding..ya gotta prove it. GM had a President named Roger Smith that got GM in trouble. Robert Stemple came along and at $25 million( in salary per year) , broke GM with their junk cars. GM is still on the edge of going under and if elected, Romney will make sure it is gone. GM has tried unsuccessfully to dump Corvette. It is not profitable.

[sokodad]

@raginroadrunner Do the research like I've told you earlier and you'll find where Ford took $5.9 billion from the energy bill to redesign their plants and come up with better fuel efficient vehicles. As for GM, in May of this year they posted their biggest profit in 11 years.

[raginroadrunner]

@sokodad ..which was how much???...$20 bucks???

[sokodad]

@raginroadrunner Whatever, can't have intelligent conversation with a moron.

[raginroadrunner]

@sokodad ..That is is exactly what I have been saying..you "Chibbie" morons are jacked up..bye bye..have a nice time driving your bankrupt junk...I gonna go fire up my Jack Rousch Mustang and kick some blow hard Chibbie's ass.. with the 4,9 (279 ci) Ford cammer..this gonna be fun.

[sokodad]

@raginroadrunner Ah, now it's clear to me. You got more money than brains. Well, have fun. Maybe post some videos later of a tow truck pulling your sorry ass out a ditch somewhere. If I'm not mistaken didn't Jack Rousch's driver come in second too, um Tony Stewart who drives a Chevy. Bye, bye moron.

[raginroadrunner]

@sokodad.. Nascar???..no one watches that phony crap anymore...yellow flags one lap to go..bullcrap..yep rip them 600 cubic inch "Chibbies" guts out with an engine less that half the size..Chibbies do big burnout..lots of noise, lotus of bravado..light comes on.. the Mustang is.."Gone"..with Cats and mufflers from factory, 9" in rear with 12" slicks..it is ugly ..all the Chibbies disappear...I'm beginning to think that they don't want to play..

[Foxrider67Dawson]

@raginroadrunner You are an idiot just read your writing I used to have a Roush Mustang and it wasnt shit I traded it in to get a Duramax and I bet my firebird will slap your roush

[raginroadrunner]

@Foxrider67Dawson..You can always tell a Chibbie man..you just can tell em much,,you guys are all pimple chops...you're easy to stir up..say this to a Ford man and he will reply.yeah yeah yeah...Mopar guys just ignore you cause they know they have the best..but the "Chibbie" cry babies...they get all riled up,, they are funny...I don't have anything against GM..hell without them the salvage yards would go out of business.. chill out..Duramax???...Bullshit...p­lain and simple...a Jap diesel...LOL

[Foxrider67Dawson]

@raginroadrunner LMAO wtf are you typing I am not a chibbie man I drive what ever thats why I have a cummins and I did have a powerstroke until it got totaled I am just utting your dumb ass in your place and as far as your duramax is a jap diesel you couldnt be more wrong there is a plant in indiana that builds the duramax motors the motor hasnt been a jap motor for years please try again CHIBBIE BOY

[raginroadrunner]

@Foxrider67Dawson ...easy Dude..not so loud...someone might be listening and you how the saying goes..."Tis better to remain quiet and be thought a Dumass than to speak out and remove all doubt"...

[LittleBrody22459]

@sokodad Wait... doesn't GM mean Government Motors now? lmao

[sokodad]

@LittleBrody22459 Sure and Ford means Fucked Over Rebuilt Dodge.

[raginroadrunner]

@sokodad ..GM went broke..."Fact",,how's that for research for ya???

[sokodad]

@raginroadrunner So did Chrysler, twice. how's that for facts for yah? I'm not going to get into a pissing match about any brand. I just don't like it when people make incorrect or false statements about one brand or another. There maybe truths to that statement, but not all of the truth. I like all the brands. My wife drives a Chrysler Town & Country, I drive a Chevy pickup, my son drives a Ford Ranger. We're not brand specific. I like all three.

[sokodad]

@raginroadrunner I disagree with you that Chevy never made a decent truck since 59. Their 60's & early 70's trucks were great. Not of the three brands made anything decent in the mid to late 70's and early 80's. They all rusted and were under powered.

[raginroadrunner]

Chevrolet trucks=."JUNK"

[jrmiller011]

@raginroadrunner the traction bar is not made my chevy, its either custom made by the shop that is making the lift or in a kit that is assembled. so i would say it makes it pretty badass to have that kind of power and traction to bend a traction bar because i have seen trucks start hopping on blacktop tug-of-war and they hardly bend like that.

[sokodad]

@raginroadrunner raginroadrunner =idiot

[BrandonR572]

Looks like since the rear end is so far down when that long flimsy thing he called a 4 link bar bent, it pivoted causing the frame to bend, bet those lower bars are bigger now, and probably gusseted.

[peterfiechtl]

dumbass had blocks on the front axle.tsk tsk tsk

[xXxchipperchopperxXx]

@peterfiechtl he had blocks all the way around

[BurninDiesel6BT]

it wasnt the bed that broke it was the traction bar that bent and caused the bed to lift

[kelbo031890]

that sucks

[Methgivesdeth97]

his bed just broke some bolts

[Mr7475ih]

@Methgivesdeth97 I never seen bed bolts cause the cab to pop up in the back like that?

[hager999]

Today's Monster Trucks are complete pussies compared to the '60's through '80's Monster Trucks.

Those beasts back then may not have been as powerful, but at least they retained their dignity and still had their Original Body and not PLASTIC.

[killerkow10]

@hager999 fiberglass :P

[Covertmaddroxx1]

@hager999 Lol Carbon Fiber and Fiber glass are not STEEL

[hager999]

@Covertmaddroxx1 I wasn't talking about the damn Chasis, I was talking about the Body.

[ZzDe0]

@hager999 There was no monster trucks in the 60's.

[ztwntyn8]

you can see the ladder bar bend then the frame bend if you pause or slow mo it. alota torque yo!

[gravediggmn]

i love how every one is like "this isnt a monster truck", this is was the orignal monster trucks started out as! did you see the first bigfoot? this truck was just as big if not bigger than the first bigfoot!

[NICKLADD]

bends a bar?? thats what we call the frame buddy

[HemiDart]

Chevy Crap..........

[JonesyBroski]

@HemiDart only if you were correct

[Fallraptor]

well, that sucks, I personally have been around truck pulling since I was 10 (I'm 31 now), and seen alot of crap happen, that there is the end of that frame

[actZR900]

all that happened was his traction bar bent because of the axle wrap, its worse on a lifted truc especially when pulling, frame is fine.

[zachkuby87]

@actZR900 frame is fine? are u looking at the same truck as everyone else? the entire truck bends

[Jaredsfarm]

Must have been a Toyota frame

[counterclockwise123]

lol

[drewdrew831]

chevy



[caulk04]

Jeeze...if you're going to build a traction bar, build one right.

[Sneadster]

For Off Road Durability

[mingopetro]

@Sneadster Fucking Owner Really Dumb

[JManGuitar5150]

@mingopetro Thats a Chevy...

[TheDamien1115]

@Sneadster Found on road DEAD

[bigbuckhunter70]

You mean should have got a dodge Fixed Or Repaired Daily Fucked Over Rebuilt Dodge Found On Road Dead

[jsenable3]

@bigbuckhunter70 Wow you must have been broke down in your dodge a to think of those. dodge great engine but lacking in the body and frame work.

[monstertrent14]

shoulda got a ford!

[tuggerpuppy1]

@monstertrent14 Yeah. Then it wouldn't have moved so you'd have nothing to worry about.

[boggers44]

nice truck

[analog56x]

needs beefier links haha

[FATMIKED5183]

Damn.