hope you ther do you tested maybe the v100do8 or GENIUS CP and i saw you fling with 60#b can you send me the settings for tx thx in advance the adres is joseph51@wp.pl
Something tells me, it takes 99.9% skill to fly the stock 4G6 like you do! The remaining 0.1% goes to the fact that the 4G6 is a CCPM heli!
Not a good heli to learn 3D with unless you upgrade the motor. Despite your best efforts at the setup, it's very easy to stall the blades if you're not careful with your flying. And if you stall, it can easily get worse, lose too much rpm, lose the tail and crash.
@marksIItimewarps It does take skill and good collective management to 3d a heli but the heli also has to be capable to do what you want to do. One great thing about this heli is that my collective management has got way better. When you fly you have to listen to the heli and feel its limitations that way when you try 3d you dont over do the pitch causing it to bog down.
@buildem336 Thanks for explaining! I think that clears so many things up. I've already reduced the cyclic and collective rates and used as much rpm as I can and still didn't solved bogging down. It takes much finesse to 3D the stock 4G6 properly. I see from your vids, you took a lot of care with the flips, I can't do such slow flips yet, I find fast flipping easier but it's a hit or miss, the motor had high chances of bogging with rough handling. Thanks!
Man... You are a GOD Pilot !!! I just believe beacuse I´m seeing lthe scenario!!! It can´t be 3D COMPUTER SCENE !!! You are a genius !!! I think I never will pilot like that...never... I don´t have money for that. What simulator you think I can pratice, and with what RC controler to begin flying like you? How many years of piloting you have? Don´t tell me you fly since 2 years...cause it will make me feel bad hehehe
@cassiusvideos I have the Realflight 3.5 simulator and have been flying for 3 1/2 years now. I would say the best all around size heli for practice would be something around a 450 size heli.
Ok that sounds promising, I never got my 4g3 to fly as good as I wanted, had a lot of trouble with it, mostly with the getting the tail to hold and confusing tx adjusting but I always thought it would be a good heli if some thing were done better and it sounds like the 4g6 is exactly that and then some
hey man i have a blaDE msr and i can fly it good enough to go throgh my house and through cardboard loops and ussually light crashes acur and some heavy crashes once and a while do you think i can get one of these
Very, very impressive! I haven´t gotten my hands on one of those little beasts yet but I imagine they must be more difficult to control than a bigger 3d heli...
hope you ther do you tested maybe the v100do8 or GENIUS CP and i saw you fling with 60#b can you send me the settings for tx thx in advance the adres is joseph51@wp.pl
servvis23 1 month ago
That was great!! Camera man was on point as well! How long did it take you to get to that skill stage? If you don't mind me asking.
rwoods1985 1 year ago
is that a damn hummingbird or an rc heli?very nice flying. where in socal do you live? id guess somewhere in ventura county
TheFreshPeddler 1 year ago
if having a flybar is not a problem for me is this the best heli to go for compared to the other Walkera flybar less versions ?
how do the servos fair up, any problems ?
o0dekker0o 1 year ago
Something tells me, it takes 99.9% skill to fly the stock 4G6 like you do! The remaining 0.1% goes to the fact that the 4G6 is a CCPM heli!
Not a good heli to learn 3D with unless you upgrade the motor. Despite your best efforts at the setup, it's very easy to stall the blades if you're not careful with your flying. And if you stall, it can easily get worse, lose too much rpm, lose the tail and crash.
marksIItimewarps 1 year ago
@marksIItimewarps It does take skill and good collective management to 3d a heli but the heli also has to be capable to do what you want to do. One great thing about this heli is that my collective management has got way better. When you fly you have to listen to the heli and feel its limitations that way when you try 3d you dont over do the pitch causing it to bog down.
buildem336 1 year ago
@buildem336 Thanks for explaining! I think that clears so many things up. I've already reduced the cyclic and collective rates and used as much rpm as I can and still didn't solved bogging down. It takes much finesse to 3D the stock 4G6 properly. I see from your vids, you took a lot of care with the flips, I can't do such slow flips yet, I find fast flipping easier but it's a hit or miss, the motor had high chances of bogging with rough handling. Thanks!
marksIItimewarps 1 year ago
sweeeeet!
dannne82 2 years ago
Perfectimundo!! Good flight, that is skill man :)
MrBenpa 2 years ago
Man... You are a GOD Pilot !!! I just believe beacuse I´m seeing lthe scenario!!! It can´t be 3D COMPUTER SCENE !!! You are a genius !!! I think I never will pilot like that...never... I don´t have money for that. What simulator you think I can pratice, and with what RC controler to begin flying like you? How many years of piloting you have? Don´t tell me you fly since 2 years...cause it will make me feel bad hehehe
cassiusvideos 2 years ago
@cassiusvideos I have the Realflight 3.5 simulator and have been flying for 3 1/2 years now. I would say the best all around size heli for practice would be something around a 450 size heli.
buildem336 2 years ago
I did some adjustments to the TX to get the full performance out of the heli. Follow rcgroups link to see my Tx settings
buildem336 2 years ago
Awsome man, I just ordered one of these. Is that basically a bone stock G?? If so i am stoked.. seems like a nice craft for a good price
mangler0075 2 years ago
My god here do you learn those skillz ?
Simulator or what buying a lot of spareparts ?
LIQUIDXFX 2 years ago
Both :)
buildem336 2 years ago
Is there much difference with flying this compared to the 4g3? Does it feel like the same heli just with better tail authority?
MIRCWOOD 2 years ago
It feels totally different from a 4g3 let me put it this way ever since I got my 4g6 I never flew the 4g3 again.
buildem336 2 years ago
Ok that sounds promising, I never got my 4g3 to fly as good as I wanted, had a lot of trouble with it, mostly with the getting the tail to hold and confusing tx adjusting but I always thought it would be a good heli if some thing were done better and it sounds like the 4g6 is exactly that and then some
MIRCWOOD 2 years ago
I'm supprised you don't hear much about servo gears getting stripped from doing this.
Afrocanuk 2 years ago
amazing...and i thought my blade msr pro.....
grenademagnet09 2 years ago
do you need to mod it Manny, flies great ?
o0dekker0o 2 years ago
The flight in the video is stock out of the box heli with only adjustments to the radio to make the heli feel to my liking.
buildem336 2 years ago
looks great, i might get one, does it fly well in light wind ?
o0dekker0o 2 years ago
yes it will handle light wind well.
buildem336 2 years ago
hey man i have a blaDE msr and i can fly it good enough to go throgh my house and through cardboard loops and ussually light crashes acur and some heavy crashes once and a while do you think i can get one of these
YourFriendlyMe 2 years ago
Very, very impressive! I haven´t gotten my hands on one of those little beasts yet but I imagine they must be more difficult to control than a bigger 3d heli...
Axiomatic75 2 years ago
Yes it is harder than a bigger heli but the 4g6 is a lot of fun and it flys awesome
buildem336 2 years ago
They´re supposed to be available here within the next couple of weeks, I´ll get one I guess...
How long have you been flying helis anyway?
Axiomatic75 2 years ago
Impressive flying buildem and after seeing how well it flies i definitely have to get one of those...
schubimz 2 years ago
Amazingly impressive flying, as with all of your vids. I hope one day I can be half as good as you.
Jaydawgx7 2 years ago