link above is for AMD mac 10.6.7 vmware. to access link just put a " . " or period or dot whatever you want to call it between the "bit" and the "ly" part of the link.
for amd user use this to run inside vmware or virtual machine. trust me it works. also to get this to run search "snow legacy .iso" on google which may be requiered to make this run. this link is the virtual machine image for AMD
My computer hardware virtualisation run no SecurAble so how is it possible ??????????plz help me.board asus p5sd2-vm,intel core2duo 2.66 GHz prosser 2 GB RAM
I even tried to enable EFI and direct use snow iso. But it starts running some initialization and stops with a message as "invalid front-side bus frequency 45 hz disabling the cpu " and wont make any changes even after 30minutes...
Hi I am trying to install Snow leopard 10.4a432 on my Dell XPS 15z which is i7 8GB RAM and stuff using Virtual Box. When i try to use darwin without EFI option it takes me to boot selection mode where i select the snow iso file and select the DVD mode of boot. It starts and stops in the initialization stage and stop with "System startup time 185984582 nanaseconds". Doesnt even move after that. Please assist i have my virtualization enabled and i have even checked in BIOS.....
So if I get the red "No Hardware Virtualization" then it is impossible to do it on this computer and I will need to use one that has hardware virtualization? That sucks!
i have already installed it and have been using it for some time now on vmplayer but now when ever i turn it on it goes into the installing process again
btw befire i start it the virtual machine is powered off
i get an error that says "A virtual CPU has entered the shutdown state. This would have caused a physical machine to restart. This can be caused by an incorrect configuration of the virtual machine, a bug in the operating system or a problem in the VMware Workstation software. Press OK to restart the virtual machine or Cancel to power of the virtual machine." why is it doing this i have a win 7 comp please help asap!!!, and when i do press ok it restarts and asks to install again and loops th
AMD users: I installed ideneb on an AMD x64 2 years ago. Installed it directly on the HD, no virtual machine. I remember it was important to select voodoo kernel. CPU must support SSE2. But that was Leo, not Snow Leo.
Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Player supports hardware virtualization. thats what it tells me..do u know what could i do?
wow, this video helped me too. I used virtualbox for mac, but I was told that vmware was better. now tested with vmware and it worked! Thank you, this video really helped me with vmware! sry bad english
got it to install but now when i try to boot it it says "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I don't understand why this is happening, did everything correctly and am booting the darwin snow file
can you tell me why this doesnt work on my asus laptop (intel core i7, 8gb ram, yadda yada yada, windows 7), but works on my desktop (amd phenom quad core, 4gb ram, windows xp)??
on my laptop it just shows the mac (grey screen with apple logo) and just keeps loading and never moves, ive waited over 2 hrs before, no change... please help, thank you!
can someone just send me the already downloaded and installed Darwin snow file because my comp won't let me install the installation file it just loads the chameleon then when i hit enter it shows the error i posted below
for some random reason i get an error that says "A virtual CPU has entered the shutdown state. This would have caused a physical machine to restart. This can be caused by an incorrect configuration of the virtual machine, a bug in the operating system or a problem in the VMware Workstation software. Press OK to restart the virtual machine or Cancel to power off the virtual machine." why is it doing this i have a win 7 comp please help
get random kernel panics with more than 1 core on virtualbox, might be worth mentioning. great tutorial nonetheless. thanks so much... love my new system.
Thanks man - this video and your site were very useful. Even though it took a day and 10+gb of downloads, I finally have it working.
I'm on a i5 K655 Clarkdale, and found I had to use the "-v busratio=7 cpus=1" switch for the Snow Leopard install, then put the following two lines in my .VMX file:
--when I run with VirtualBox it says "Press ESC in 5 seconds to skip startup.nsh, any other key to continue.
Shell>_" and when I press any key it just says " 'a' is not recognized as an internal or external command, operable program, or batch file."
--when I run VMware Player it closes when I go to Apple loading screen. My computer is win 7 (64-bit) and is brand new with a gaming vcard and the works. I have no idea why this doesn't work.
The way i got this to boot without any issues was to use the installation disc (SL_10.6.6i_by_Hazard.iso) to boot then press F8 and choose Machintosh HD. has worked every time without any issues. Thumbs up so this can be seen.
hey I tried this with ubuntu 10.10 I already got into the bootscreen with the apple logo but then the installation seems to stop.......does it just take a while to continue or is this incompatible with Linux?
How do I install It on a physical HDD ? It works on virtual box,thanks to you ! But I'm not able to burn the ISO to dvd ! The ISO is around 4.3 GB and when I burn it using Nero or the default windows 7 burner,to a dvd,the dvd is made of only 1 MB ! And when tried to boot it says error loading bios . Can u or any1 help me with this ? Should I use a special software to burn the ISO to dvd or I'm doing something wrong ? I have wasted like 5 DVDs just to try to get it to work. Please help !
Snow_Leopard_10.6.6_SSE2_SSE3_Intel_Only_by_Hazard by user denis2011
I used it and it worked great on my VMWare Workstation 7.1.3 with each an Intel Core i7 930 and a Core2 Quad EE QX9300 mobile.
i7 users may want to use the Darwin_Snow_legasy ISO v2 EFI for Win7 x64 or you must command -x -v cpus=1 busratio=xx where "xx" equals your cpu multiplier
Incredible..this installs on my hard drive flawlessly, load cd, run bootloader, install..walah snow leopard. awesome shit. No "root device error" or other crap with this awesome installer..
I followed your tutorial exactly, I went to that website and downloaded that program to see If I could do it and it said I could, I downloaded the torrent file of the one you showed and I set it up like how you showed, but I'm still getting that error! I went to the website in the description and did what it told me on there, still not working :(
@dudu171717 I know he has but a link to this error message in the description and it tells you how to solve it, but I did that and it still dont work. And my computer is capable of it. Message: VT-x/AMD_V hardware has been enabled, but is not operational.Certain guests (e.g. OS/2 and QNX) require this feature. Please ensure that you have enabled VT-x/AMD_V properly in the BIOS of your host computer.
I was successful with install, however when I get to keyboard set-up section; my mouse capture doesn't work (it freezes). I can get to the screen capture using the spacebar to advance, but after that I can't get any further. I'm using virtual box (latest version), I've tried turning the usb options on and off with no success. Hardware is an i5 2500k, Asus P8P67, 16GB ram (2 used for this) and a gtx 460 768
This has been flagged as spam show
You know the charm of iphone4, as its price,but here has iphone4! Jy5Xx 27go.info
adelleiiaxi815Z 2 days ago
bitly/wMkcSL
link above is for AMD mac 10.6.7 vmware. to access link just put a " . " or period or dot whatever you want to call it between the "bit" and the "ly" part of the link.
woll757 3 days ago
this is the link
thepiratebay.se/torrent/6374636/OSX_10.6.7_VMWARE_image_for_AMD_ONLY
woll757 3 days ago
This has been flagged as spam show
for amd user use this to run inside vmware or virtual machine. trust me it works. also to get this to run search "snow legacy .iso" on google which may be requiered to make this run. this link is the virtual machine image for AMD
thepiratebay.se/torrent/6374636/OSX_10.6.7_VMWARE_image_for_AMD_ONLY
woll757 3 days ago
How do you install XCODE with 10.6.6 ?
AlemanMx 2 weeks ago
Harry Potter???
BryanDavilaTv2 2 weeks ago
after installing , when i boot it again it just freeze at the logo.. whays that?
sokoladeszvaigznjuiv 3 weeks ago
This has been flagged as spam show
My Friends and I enjoyed your video very much we wished we could make videos like this one.
BestLaptops100 1 month ago
Gran Turismo 5 music lol
Vijaydj87 1 month ago
name song?
RidereperScherzare 1 month ago
hay does the wireless and touchad work on a laptop after you do this?
ZekTz 2 months ago
thanks for ur quick reply
MrSwarup3 2 months ago
My computer hardware virtualisation run no SecurAble so how is it possible ??????????plz help me.board asus p5sd2-vm,intel core2duo 2.66 GHz prosser 2 GB RAM
MrSwarup3 2 months ago
@MrSwarup3 i think you need more then 2GB of ram most people who do this have 8 i have six i hope it works
magicguitarist2 2 months ago
This has been flagged as spam show
that was a nice comment - FREE FULL MOVIES & TELEVISION
Real Airport Card for Hackintosh - Documentary [2011]  
a George Anton Document
(The Film is available
FREE on antonpictures Channel
Documentary Section)
paste this:
/watch?v=VG4EqIgatko
or just click below on
antonpictures
antonpictures 3 months ago
@TechGeek786 Dick! If you use that it doesn't work, I have it installed.
geograndsand 3 months ago
can you set the hazard to download pls?
22Manable 3 months ago
I cant download the items if I am using. The links are not valid.
thefunful 3 months ago
This has been flagged as spam show
can somebody please tell me how share files between the mac and pc ON VMWARE?? `PLEASE
nanocalp 4 months ago
I can't boot start Lion Os x on virtual box new version, you have any new video for the same
panchalhhitesh 4 months ago
@panchalhhitesh same here. tell me when you find out plz?
ammvid 4 months ago
Comment removed
Eman25000 5 months ago
Comment removed
Eman25000 5 months ago
i have
windows 7 home premuin
will it still work
??????????
SuperCodzombies 5 months ago
Vmware shuts down when mac logo appears. HELP PLEASE.
i7 980x
8GB RAM
(2) 500GB HDD
(1) 2TB HDD
2GB ATI Radeon 5900 HD
Windows 7 ultimate 64-bit
migz2008 5 months ago
@migz2008 Exact same problem here. I am getting puzzled why this is so easy for others yet I can't get it to work to save my damn life!
BakaRed77 3 months ago
vmware shuts down when mac logo appears. help please.
i7 980x
8GB RAM
(2) 500GB HDD
(1) 2TB HDD
2GB ATI Radeon HD 5900
Windows 7 Ultimate 64-bit
migz2008 5 months ago
@migz2008 Than you didnt have Hardware Verttuwalization or something.. check 00:17
xVIPiProLegend 5 months ago
@xVIPiProLegend I had it checked out already. I did everything this video said step by step.
migz2008 5 months ago
GT5 music lol
KKCKingOfTime97 5 months ago
Little question do you need a 64x OS (Intel_Atom and etc.)
geordi205 6 months ago
I even tried to enable EFI and direct use snow iso. But it starts running some initialization and stops with a message as "invalid front-side bus frequency 45 hz disabling the cpu " and wont make any changes even after 30minutes...
I want to use Vitual box only. Please help
BALAJISAGGI 6 months ago
Hi I am trying to install Snow leopard 10.4a432 on my Dell XPS 15z which is i7 8GB RAM and stuff using Virtual Box. When i try to use darwin without EFI option it takes me to boot selection mode where i select the snow iso file and select the DVD mode of boot. It starts and stops in the initialization stage and stop with "System startup time 185984582 nanaseconds". Doesnt even move after that. Please assist i have my virtualization enabled and i have even checked in BIOS.....
BALAJISAGGI 6 months ago
securable sowing locked off in third hardware virtualization waht can i do ??
can i use it?
i have core2duo E7400 @2.80ghz
2gb ram
320gb hard disk
windows7
ms97841 6 months ago
Lol might be the weirdest question yet but what was the song in the background!?
pun460 6 months ago
@pun460 the 1st track that is
pun460 6 months ago
i take that back just let me get the complete list of music that you used for this video
pun460 6 months ago
well should i do it i got a yes and a no and i dont want to screw up my computer...help plz
splattermind9 6 months ago
This has been flagged as spam show
When i try boot for the first time of the hazard iso i get stuck at the apple sign :( any help?
MegaChristabella 6 months ago
When i try oot for the first time of the hazard iso i get stuck at the apple sign :( any help?
MegaChristabella 6 months ago
thank you, can you send me the link to your wallpaper please
TheWindowswiz1 6 months ago
The internet won't work on mine please help!!
iPodhacks142 7 months ago
i you cant find link go 2 piratebay.(o(r(g then search Snow Leopard 10.6.6 by hazard
EliteHackxx 7 months ago
link dont work
EliteHackxx 7 months ago
do i have to have 4 cores on my acutal pc to use 4 cores on vmware?
and the same for ram like do i need 4gb of ram to use 4gb on vmware? please reply asap :)
xYourGaming 7 months ago
@xYourGaming You cant just tell a VM you have a 4 core cpu with 8 gb of ram if you dont have it... ?
RewinDxGameS 6 months ago
it says something like hardware virtualization is not compatible why its on
Thehorn3db3ast 7 months ago
don't waste your time installing this piece of shit like i did, OSX SUCKS BIG HAIRY BALLS
xXxNoisemaker 7 months ago
Thanks
kwty13 7 months ago
links are down
Bananaarama13 7 months ago
lol can i run max osx then run virtualbox in mac osx to run windows xp? =D
dhrocks4life 7 months ago
Where is the disk image iso located after downloaded?
MegaShoresy 7 months ago
i couldent download hazard
it said that the page was missing
willlisawsom 7 months ago
Yea, could you use the iPhone SDK in this?
icyshadow0 8 months ago
can I develop iPhone in this?
parthibbiswas 8 months ago
Comment removed
parthibbiswas 8 months ago
ok i hav a no for hardware virtualization can i still get it? if not how do i turn it to yes?
sonicfactor 8 months ago
oh by the way it worked so well i mean the snow leopard
thanks so much man
97param 8 months ago
would the boot problem be fixed if i install another boot loder or will that make no diference
97param 8 months ago
hey man thanks for the guide but when i tried to download the .zip files it wouldn't let me.
HighOnBass 8 months ago
thanks a million works flawless!
vikhyatrawla 8 months ago
i know iit sucks
TheTechKnowHow 8 months ago
Hazard Leopard's download page of is down. :(
Ayele2Admassu 8 months ago
This has been flagged as spam show
I just got 4 apps and 2 full CDs by using this itunes coupon.. :)
Get it at: ** [freeitunes.info] **
savannaM121 8 months ago
Is it possible to install iLife? Cause I have the installation disc but I have no clue how to install it.
Metallica4ever6355 8 months ago
it is possible that you can do it without virtualization
Mattwell23 8 months ago
I WISH THESE DAMN STAPLES EMPLOYEES WOULD TELL ME THESE DAMN THINGS BEFORE THEY SELL ME THIS CRAP
SSBBify 8 months ago
@SSBBify i agree
TheTechKnowHow 8 months ago
So if I get the red "No Hardware Virtualization" then it is impossible to do it on this computer and I will need to use one that has hardware virtualization? That sucks!
SSBBify 8 months ago
thanks it worked but sound doesn't work any suggestions? i choose my audio device and still nothing.
loui828 8 months ago
How about OS X LION?
Techfa 8 months ago
hazard osx download is down any else i can get it
Jeffers3094 8 months ago
Hi, what happened to the change display resolution video?
bjussab 8 months ago
my old virtual box was very slow is this one quick like my computer or is it slow...PLEASE REPLY
sergej4755 9 months ago
And... if SecurAble says that I haven't got hardware virtualization... I can't install it? :'(
I have already installed a few virtual machines and it ran... :S
carlesg0n 9 months ago
i have already installed it and have been using it for some time now on vmplayer but now when ever i turn it on it goes into the installing process again
btw befire i start it the virtual machine is powered off
As "It" i mean the mac osx 10.6.6
spyruf 9 months ago
10.6.7?
11Sqd3 9 months ago
i get an error that says "A virtual CPU has entered the shutdown state. This would have caused a physical machine to restart. This can be caused by an incorrect configuration of the virtual machine, a bug in the operating system or a problem in the VMware Workstation software. Press OK to restart the virtual machine or Cancel to power of the virtual machine." why is it doing this i have a win 7 comp please help asap!!!, and when i do press ok it restarts and asks to install again and loops th
spyruf 9 months ago
@spyruf do you have vt?
JellyTheDonut12 9 months ago
@JellyTheDonut12 idk what vt is, and thanks but, i already got it working
spyruf 9 months ago
@spyruf VT is virtualization technology used to run OS X on PCs.
JellyTheDonut12 9 months ago
@spyruf how did you fix it?
JellyTheDonut12 9 months ago
@JellyTheDonut12 i forgot and now i have the problem again :(
spyruf 9 months ago
@JellyTheDonut12 Also i have reset the machine a few times i dont know if that will effect it
spyruf 9 months ago
What if you dont have hardware acceleration?
Ipodtouchappsrule 9 months ago
has the hazard site gone down?
does anyone know where i could fild part 5 and 6 of the zip files?
the filesonic links dont work anymore
MayContainWeasel 9 months ago
Snowy_Vmware_files.zip|13625 and extract this.the above both files or not available pls upload again
thks
dheerendhra 9 months ago
thanks so much!!!! works on my intel core i7!!! Finally, i've been through about.. 8 different versions of mac os vmwares THAT DONT WORK!
finallyyyyyyyyyyyyyyyyyyyyyyyyy!!adslkfjalsdfjlaksdjf
TaiLNeT 9 months ago
dose this work for amd plz any1 respond if not is there a way i could get mac osx 10.6.6 with amd?
IIIK00lAiDIII 10 months ago
@IIIK00lAiDIII Not yet. For Hackintosh, I would suggest you stay away from AMD CPUs as Mac loves Intel
bvestationfan 9 months ago
Comment removed
larissanietner 9 months ago
AMD users: I installed ideneb on an AMD x64 2 years ago. Installed it directly on the HD, no virtual machine. I remember it was important to select voodoo kernel. CPU must support SSE2. But that was Leo, not Snow Leo.
larissanietner 9 months ago
Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Player supports hardware virtualization. thats what it tells me..do u know what could i do?
kooljosue 10 months ago
wow, this video helped me too. I used virtualbox for mac, but I was told that vmware was better. now tested with vmware and it worked! Thank you, this video really helped me with vmware! sry bad english
jean10231023 10 months ago
got it to install but now when i try to boot it it says "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I don't understand why this is happening, did everything correctly and am booting the darwin snow file
Boarder527 10 months ago
@Boarder527: It is important that you allocate only 1 CPU to your virtual machine.
larissanietner 9 months ago
can you tell me why this doesnt work on my asus laptop (intel core i7, 8gb ram, yadda yada yada, windows 7), but works on my desktop (amd phenom quad core, 4gb ram, windows xp)??
on my laptop it just shows the mac (grey screen with apple logo) and just keeps loading and never moves, ive waited over 2 hrs before, no change... please help, thank you!
TaiLNeT 10 months ago
can someone just send me the already downloaded and installed Darwin snow file because my comp won't let me install the installation file it just loads the chameleon then when i hit enter it shows the error i posted below
Boarder527 10 months ago
for some random reason i get an error that says "A virtual CPU has entered the shutdown state. This would have caused a physical machine to restart. This can be caused by an incorrect configuration of the virtual machine, a bug in the operating system or a problem in the VMware Workstation software. Press OK to restart the virtual machine or Cancel to power off the virtual machine." why is it doing this i have a win 7 comp please help
Boarder527 10 months ago
@Boarder527 i need help with this too asap
spyruf 9 months ago
Comment removed
spyruf 9 months ago
Comment removed
spyruf 9 months ago
once the install is done i restarted it but it loads the chameleon again, it does not say os not found
elisaulcordova 10 months ago
dam!! i have amd!! who has tried it with amd athlon(tm) 2 x2 250 processor 3.00 GHz
elisaulcordova 10 months ago
Thanks for the Tutorials it works for me. Do you have any idea how to increase the RAM used by VMWare because the Virtual machine is really slow.
liampilot 10 months ago
get random kernel panics with more than 1 core on virtualbox, might be worth mentioning. great tutorial nonetheless. thanks so much... love my new system.
btw: most links are down by now, except fs.
larissanietner 10 months ago
Aww man! I dont have AMD-V :(
russjr08 10 months ago
If i boot i just get the apple logo and the spinning loading cirjel. But it won't boot farther.
En when i boot it using: busratio=20 cpus =1 -v -x
I see it gets stuck with: acpi_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagemnt) timed out.
Any idea what I can do about this?
The mac OSX 10.6.2 did work, but 10.6.6 doesn't
kevinbrok 10 months ago
Btw, I'm using VMWare Player.
When i use Virtualbox i get an other error.
Something with a front-bus error at 45 hz. :P
kevinbrok 10 months ago
this file was not found on server?? i need a help
TheUditha1 10 months ago
its Alive
snowclaw07 10 months ago
All it does is freeze at the black screen with text
the747videoer 10 months ago
were can i find the hazard
fabianwiljewelweten 10 months ago
after you have done this can you switch between mac and windows?
evileyedfreak 10 months ago
does adobe web premium work on this? plz answer!
alexeproductions 10 months ago
does web prmium work on it?
alexeproductions 10 months ago
nice tut it worked on my computer!!!!!!!!!!
darkfire82297 10 months ago
Hi, can i have a working link to download vmware_zip files. Thamks in advance
litldrmrby02 10 months ago
Thanks man - this video and your site were very useful. Even though it took a day and 10+gb of downloads, I finally have it working.
I'm on a i5 K655 Clarkdale, and found I had to use the "-v busratio=7 cpus=1" switch for the Snow Leopard install, then put the following two lines in my .VMX file:
smc.present = "FALSE"
cpuid.1.eax = "0000:0000:0000:0001:0000:0110:1010:0101"
Anyone getting errors/crashes with an i5 might give that a try too.
RickyNoShoes 10 months ago
do i have to pass hardware virtualisation to do this?
SeizedBog 11 months ago
@SeizedBog yes
elisaulcordova 10 months ago
wait be how do you downlaod all 9 files?
SgtJak1665 11 months ago
does this only work on Intel? not for AMD? there is so much people who said they got it worked in AMD, I have AMD phenom II X6 1055T
akmix 11 months ago
10.6.7 is out
11Sqd3 11 months ago
where to download the vmware files?
can give other link?
tws4271 11 months ago
can you make it full screen
michaelwog96 11 months ago
Well.. it works and all.. but cant change the resolution, there are commands for that.. but where do I enter them?
djvinnie112 11 months ago
What screen recoder do you use?
2dFXman 11 months ago
@2dFXman camstudio with the special codec pack
recruitmentmod 11 months ago 3
@recruitmentmod lol GT5 Prologue Music???
KKCKingOfTime97 10 months ago
hey i go to the sites to download the extra thing for vmware, but it says the file cant be found. can someone repost it and reply with the link
OKSTATEFAN100 11 months ago
@OKSTATEFAN100
youtube wouldn't let me post the full url but it's a link to the rapidshare file as seen in the video which is how I got the file.
Set the file to 720p and pause at the rapidshare url file and type what you see in the address bar
cacoe 11 months ago
--when I run with VirtualBox it says "Press ESC in 5 seconds to skip startup.nsh, any other key to continue.
Shell>_" and when I press any key it just says " 'a' is not recognized as an internal or external command, operable program, or batch file."
--when I run VMware Player it closes when I go to Apple loading screen. My computer is win 7 (64-bit) and is brand new with a gaming vcard and the works. I have no idea why this doesn't work.
NguyenxTurbo 11 months ago
@NguyenxTurbo Try turning of EFI
pieterll 11 months ago
@pieterll On which program? And how do I do that? Sorry noob question.. :(
NguyenxTurbo 11 months ago
hi mate,
securable was showing the result as max bit length 64,hardware dp - yes,but hardware virtualization as no,can i still run mac on my pc?
my processor is core 2 duo(its an old pc)
ram is 1.5 gb and there is inbuilt graphics card of 64 mb
pls tell me whether mac will run on my pc correctly or not.presently i use win 7 ultimate.pls reply asap
appsfreak 11 months ago
Does anyone know if there's a way to run Logic Pro 9 on this?
TheWeirdTechGuy 11 months ago
The way i got this to boot without any issues was to use the installation disc (SL_10.6.6i_by_Hazard.iso) to boot then press F8 and choose Machintosh HD. has worked every time without any issues. Thumbs up so this can be seen.
gotenks157 11 months ago
Or juist get it from TPB quicker: /torrent/6150975/SL_10.6.6i_by_Hazard :)
djvinnie112 11 months ago
Comment removed
djvinnie112 11 months ago
Do I need to use AMD_patch?
PrOdiGyViisto 11 months ago
what if I have AMD? will I need to install AMD Patch from the kext?
PrOdiGyViisto 11 months ago
Is that gran turismo 5 in the background noise
michaelwog96 11 months ago 9
@michaelwog96 indeed :P
recruitmentmod 11 months ago 3
hey I tried this with ubuntu 10.10 I already got into the bootscreen with the apple logo but then the installation seems to stop.......does it just take a while to continue or is this incompatible with Linux?
IArgaLI 11 months ago
How do I install It on a physical HDD ? It works on virtual box,thanks to you ! But I'm not able to burn the ISO to dvd ! The ISO is around 4.3 GB and when I burn it using Nero or the default windows 7 burner,to a dvd,the dvd is made of only 1 MB ! And when tried to boot it says error loading bios . Can u or any1 help me with this ? Should I use a special software to burn the ISO to dvd or I'm doing something wrong ? I have wasted like 5 DVDs just to try to get it to work. Please help !
b2k811 1 year ago
Tankss Man!!! really nice tutorial but i found the iso on the ~~bay~~ was much easier!! woork really good on vmbox!
timarc51324 1 year ago
You Are AWSOME
ramlap 1 year ago
Here's the link to the same torrent on the "Bay"
Snow_Leopard_10.6.6_SSE2_SSE3_Intel_Only_by_Hazard by user denis2011
I used it and it worked great on my VMWare Workstation 7.1.3 with each an Intel Core i7 930 and a Core2 Quad EE QX9300 mobile.
i7 users may want to use the Darwin_Snow_legasy ISO v2 EFI for Win7 x64 or you must command -x -v cpus=1 busratio=xx where "xx" equals your cpu multiplier
SelectOMatic200 1 year ago
Hey i have a problem i don´t have internet connection can you help me? I am using VMware Player
noob01100 1 year ago
if you get the problem with thehardware virtualization, you have to go to the bios, go to adwanced and enable the hardware virtualization
MrDaMou 1 year ago
I love Spotify.
Xe054 1 year ago
install is fine, no sound or internet tho (vmware)
MattZildjian 1 year ago
Wait does it actually install on the computer like u are using a mac or does it just let u open that window
MozzarellaMonky 1 year ago
Will this work on vista plz help
MozzarellaMonky 1 year ago
Incredible..this installs on my hard drive flawlessly, load cd, run bootloader, install..walah snow leopard. awesome shit. No "root device error" or other crap with this awesome installer..
soulslicer0 1 year ago
This has been flagged as spam show
Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Player supports hardware virtualization.
WHAT IS THE PROBLEM !!!
19medoo19 1 year ago
This has been flagged as spam show
Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Player supports hardware virtualization.
19medoo19 1 year ago
This has been flagged as spam show
Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Player supports hardware virtualization.
WHAT IS THE PROBLEM !!!
19medoo19 1 year ago
This has been flagged as spam show
Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Player supports hardware virtualization.
WHAT is the PROBLEM
19medoo19 1 year ago
I followed your tutorial exactly, I went to that website and downloaded that program to see If I could do it and it said I could, I downloaded the torrent file of the one you showed and I set it up like how you showed, but I'm still getting that error! I went to the website in the description and did what it told me on there, still not working :(
iRandom1622 1 year ago
@iRandom1622 What is the error?
Have you tried virtual box and Vmware?
dudu171717 1 year ago
@dudu171717 It says something about AMD. I cant remember the error message exactly. I'll try and find it.
iRandom1622 1 year ago
@iRandom1622 okay :)
dudu171717 1 year ago
This has been flagged as spam show
@dudu171717 I know he has but a link to this error message in the description and it tells you how to solve it, but I did that and it still dont work. And my computer is capable of it. Message: VT-x/AMD_V hardware has been enabled, but is not operational.Certain guests (e.g. OS/2 and QNX) require this feature. Please ensure that you have enabled VT-x/AMD_V properly in the BIOS of your host computer.
iRandom1622 1 year ago
@iRandom1622 Use Virtualbox instead.
Jed05 1 year ago
@Jed05 I did. :/
iRandom1622 1 year ago
Comment removed
dudu171717 1 year ago
@dudu171717 Yes...it's the entire OS.
Jed05 1 year ago
Ok. I've got an error : /
Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Player supports hardware virtualization.
trickbikers 1 year ago
Hey thanks for everything I got it to work, only problem for me is no sound? help please!
DragClutch 1 year ago
Where does the Macintosh HD come from? Where is this disc on my computer?
wartyboy777 1 year ago
I was successful with install, however when I get to keyboard set-up section; my mouse capture doesn't work (it freezes). I can get to the screen capture using the spacebar to advance, but after that I can't get any further. I'm using virtual box (latest version), I've tried turning the usb options on and off with no success. Hardware is an i5 2500k, Asus P8P67, 16GB ram (2 used for this) and a gtx 460 768
cdbob 1 year ago
does Intel Celeron work to this
NetrizMusic 1 year ago