so its okay on a black mousepad? problem with this mouse is no side buttons WTF! so many fps you can lean left or right and i assign those buttons. or i'll assign thsoe buttons to talk on vent... so sad :(
Are there still reports of this mouse randomly becoming disconnected for a second(meaning you hear the USB disconnect noise) and then coming back on its own? That was a big issue with me when using the original Kinzu.
@EthanNixon So you suppose that kinzu v2 pro works fine on all-black mousepads even if I'm a semi-low sensitivity player? I've been thinking of buying this mouse, but became wary when you said you won't recommend this mouse to FPS players with lower sensitivity.
@sill1j You will hit the malfunction speed a lot, but with a solid color mouse pad, it won't malfunction in the air. I use 1.3-1.5 in-game, 6/11 Windows, and 400DPI. That is the sensitivity I play with when I play, and I tested it down to 1.2. Yes, I hit the malfunction speed, but it didn't bother me. This was also on a multi-colored mouse pad, but what is acceptable for me might not be for you.
@Rock3tify 50ips versus 65ips, so yes. However, they react differently when reaching the malfunction speed on different surfaces. I tracked a lot higher with the Kinzu v1 than Kinzu v2.
@Rock3tify and what about lift off distance ? i saw this review
youtube.com/watch?v=Ffr90gpZsO8&feature=related , takasta told that both new mice ( kinzu v2 and kana ) have hight lift off distance , but he tested it on razer destructor , and you have the same mousepad as me )) check it plz ))
@Rock3tify I play with a little bit of a lower sensitivity and I can use the Kinzu v2 Pro fine, even with a NaVi QcK+. The latest firmware doesn't do much, but you could look into the Kana, since it has a much higher malfunction speed.
@Rock3tify Tell your friend to search SteelSeries' Facebook page. They are giving out teflon mouse feet for everyone who bought an early version of the Kana.
@imdabait I don't own a Talent, so I can't tell you. I wouldn't trust it though, since the multicolor issue. It would work well with the Stealth though.
@nexes1337 What issue? There's two. If you are talking about the multi-colored mouse pad malfunction, it is an issue. Only Pixart sensors suffer from this, and it's known. If you're talking about the REALLY low malfunction speed, that's also an issue...
@EthanNixon hi man , i ment the issue with multicolored pads and sensors acting weird to it , are their sensors that dont react badly on heavy colored pads?
@nexes1337 To my knowledge almost any sensor that isn't a Pixart sensor reacts quite normally to multi-colored mouse pads. I haven't tested much Razer products, but they usually use Avago sensors, and they should be good. Mice like the old Kinzu, IO1.1, IE3.0, G400, don't have that issue. I'm pretty sure the Deathadder and Abyssus are also fine.
@EthanNixon its common sense that it will malfunction on diff colored mousepads , its really bad not using like for instance the black version , although your navi one is way nicer
so its okay on a black mousepad? problem with this mouse is no side buttons WTF! so many fps you can lean left or right and i assign those buttons. or i'll assign thsoe buttons to talk on vent... so sad :(
ExteelPaprika 18 minutes ago
Are there still reports of this mouse randomly becoming disconnected for a second(meaning you hear the USB disconnect noise) and then coming back on its own? That was a big issue with me when using the original Kinzu.
UnknownEnemy 3 days ago
@UnknownEnemy I've not experienced this issue, but I also didn't experience it on the five plus Kinzu v1s I've owned. :P
EthanNixon 3 days ago
Comment removed
davidmarquez9m 1 day ago
So i owned Steelseries Kinzu v1, i want to but this v2. I own SS QcK+ MousePad. WIll it work good on that mouse pad?
HoNNooB 5 days ago
@HoNNooB It will, it's single colour..
TugUnboxings 4 days ago
Kinzu v2 pro work good with QcK+ heavy only black color?
Stefanmaximum999 1 week ago
@Stefanmaximum999 Yes.
EthanNixon 1 week ago
@EthanNixon So you suppose that kinzu v2 pro works fine on all-black mousepads even if I'm a semi-low sensitivity player? I've been thinking of buying this mouse, but became wary when you said you won't recommend this mouse to FPS players with lower sensitivity.
sill1j 6 days ago
@sill1j You will hit the malfunction speed a lot, but with a solid color mouse pad, it won't malfunction in the air. I use 1.3-1.5 in-game, 6/11 Windows, and 400DPI. That is the sensitivity I play with when I play, and I tested it down to 1.2. Yes, I hit the malfunction speed, but it didn't bother me. This was also on a multi-colored mouse pad, but what is acceptable for me might not be for you.
EthanNixon 6 days ago
@EthanNixon malfunction speed is higher then in Kinzu v1 ?
Rock3tify 4 days ago
@Rock3tify 50ips versus 65ips, so yes. However, they react differently when reaching the malfunction speed on different surfaces. I tracked a lot higher with the Kinzu v1 than Kinzu v2.
EthanNixon 4 days ago
@EthanNixon because a play low sens ( win 6/11 ) game 1.3 , markc mouse fix , 400 cpi kinzu v1 , 1920x1080 , 120 hz
and even the mouse is very small and light ( is comfortable for me ) i can't move my hand faster :( i hoped that v2 would have better malf speed
and what about bugs , a heared that in the latest firmware everything was fixed
Rock3tify 4 days ago
This has been flagged as spam show
@Rock3tify and what about lift off distance ? i saw this review
youtube.com/watch?v=Ffr90gpZsO8&feature=related , takasta told that both new mice ( kinzu v2 and kana ) have hight lift off distance , but he tested it on razer destructor , and you have the same mousepad as me )) check it plz ))
Rock3tify 4 days ago
@Rock3tify I play with a little bit of a lower sensitivity and I can use the Kinzu v2 Pro fine, even with a NaVi QcK+. The latest firmware doesn't do much, but you could look into the Kana, since it has a much higher malfunction speed.
EthanNixon 4 days ago
@EthanNixon my friend visit me yesterday with kana ) white edition , it's very handsome :D
materials , mouse wheel , everything but not glides , mice have very low lift off , about 1-1.5 mm
but kana is big for me , it remind me a xai , but xai was much more heavy
kinzu is the perfect form for me , thanks for your review )
Rock3tify 3 days ago
@Rock3tify Tell your friend to search SteelSeries' Facebook page. They are giving out teflon mouse feet for everyone who bought an early version of the Kana.
EthanNixon 3 days ago
How is it in on the PureTrak Talent?
imdabait 1 week ago
@imdabait I don't own a Talent, so I can't tell you. I wouldn't trust it though, since the multicolor issue. It would work well with the Stealth though.
EthanNixon 1 week ago
this is not an issue , its just how laser a/d optical shit is made
nexes1337 2 weeks ago
@nexes1337 What issue? There's two. If you are talking about the multi-colored mouse pad malfunction, it is an issue. Only Pixart sensors suffer from this, and it's known. If you're talking about the REALLY low malfunction speed, that's also an issue...
EthanNixon 2 weeks ago
@EthanNixon hi man , i ment the issue with multicolored pads and sensors acting weird to it , are their sensors that dont react badly on heavy colored pads?
nexes1337 2 weeks ago
@nexes1337 To my knowledge almost any sensor that isn't a Pixart sensor reacts quite normally to multi-colored mouse pads. I haven't tested much Razer products, but they usually use Avago sensors, and they should be good. Mice like the old Kinzu, IO1.1, IE3.0, G400, don't have that issue. I'm pretty sure the Deathadder and Abyssus are also fine.
EthanNixon 2 weeks ago
kinzu with sidebuttons would be perfect...
kavePizzaHunter 3 weeks ago
on a normal black steelseries qck+ , does the kinzu v2 pro have the same problem with the NAVI edition ?
hichemfelhi1 3 weeks ago
"The Kinzu v2 Pro, with updated firmware, does not have the pixel jumping bug.
Fu" So the problem ur showin in your video is gone?
HannesBengtsson 3 weeks ago
@HannesBengtsson It's not the same bug, so the malfunction will still happen on multi-colored mouse pads.
EthanNixon 3 weeks ago
@EthanNixon its common sense that it will malfunction on diff colored mousepads , its really bad not using like for instance the black version , although your navi one is way nicer
nexes1337 2 weeks ago
how much did it cost?
February19th 4 weeks ago
@February19th It was sent to me from SteelSeries for review purposes, so nothing.
EthanNixon 4 weeks ago