BETHEL BROTHERS HOT ROD Project Sam PASSENGER HEADERS

[Devilwelder]

holy cow...ugly like shit.... retard brothers.

[CoolbreezeX82X]

lol screw these people crying like girls, no one is going to be under your truck looking at how straight a bead is. It makes a strong weld and that's all that matters. I needed advice on welding my exhaust and yours worked and not a single crack and it's been almost a year. Thanks.

[danbethel]

@CoolbreezeX82X LOL, gives em' something else to cry about. They hate that I show people how to save money and time. Besides, I kind of like the mechanical look of things. Shave it all down, and all you have is a woman right?? LOL

[jimmiesdog]

FAIL

[jimmiesdog]

haha fired baybabies

[citydriver]

DUUUUDE your seriously need to get a MIG welder

[danbethel]

Welcome to the blocked list, both of you YOGA tards, can suck it.........and you probably would.....so just fuck off instead!

[paulkalin]

Lol thats some funny shit.. as long as you get the job done? thats deff something a redneck would say. You should get the job done good. Not just get it done.

[berrija]

hey danbethel, rocket 7865 is right on many things! quit being a dick and know when your being called out on your mistakes. Would you not TIG weld that for a really great weld with minimal clean up?

[danbethel]

@berrija Like the other dude, you just like talking shit. If you knew anything about the show I produce, you would know that, 1. I'm not a rich dude, and work with what I have. 2. There is alway, more than one way to skin a cat( a metaphore for saying there is always multiple ways to accomplish something) 3. Welcome to the blocked list. How's that for being a dick?

[robvk6]

@danbethel LOL !!!!!!

[danbethel]

@juanpedro956 Just try and take your time, make it smooth, and the weld should be what you want. Using the C welding pattern, we have never had any of the welds break, as long as they weren't ground all the way down.

[rocket7865]

My instructor would have my ass if I welded like that. You had a very inconsistent bead, no nozzle to protect the tip even though it is flux, to long of electrode stick out, sandals and sleeveless shirt. The advice you gave was good advice I would just advise you to get better at welding before making another video. You need to move more fluently with the same travel speed throughout the weld. Use a vice to make a the pipe more stable and make fewer passes.

[danbethel]

@rocket7865 Screw you, and your instructor. Like I have said before, Men get the job done, what you do is whine like a woman, about sandals, and short shirts. Guys like you, and your instructor make me sick.

[bluecollarboiler]

when I grow up, I'm going to buy a Tig machine! (I'm 53 now )

[vanetu1]

He forgot gas  shield !

[basiclywayne]

How come there is so much splatter?  Not bashing you just wants to know why platter happens.

[mta415]

@basiclywayne flux core wire

[latitude500]

Thank you for your video, you need to make more. I'm attempting to learn about welding so I can weld my exhaust together.

[danbethel]

@latitude500 You are welcome, you can also check out some of the other vids on you tube, there are a few guys that explain it better than I do.

[cheyennepipkin]

here's my advice "bayBay" dont ever try to instruct someone on welding again, thats one of the worst beads ive ever seen run, and its a simpe MIG welding process! bahaha! an inspector would laugh u out the damn door son.. leave it the pros... which is me and my co workers!

[danbethel]

@cheyennepipkin Whatever dude

[erikreish]

hahaha!

[hangoutsumtime]

is this flux welding? .035"? nice vid

[danbethel]

@hangoutsumtime We've used 035 and 058. But yes.

[hangoutsumtime]

@danbethel cool

[viggoM35]

Sweeeet! lol

[speedfuzion]

lol welding in sandles, I'm glad im not the only one who has pretty ugly welds

[beeb1421]

good job bethel bros.

this is informative, especially the "C" method.

I went to a shop to do a "3 in. dual exhaust for my 71 chevy truck, they want 500 bucks!

i got a little lincoln 140 gas/gasless welder that cost me 250. I'm gonna do it myself.

the money i save can go towards some flowmasters.

Good vids!

[danbethel]

@beeb1421 not only do you save more doing it yourself, you also get the bragging rights. We have a simular welder, we didn't use the gas, just good wire, and a broken weld was rare.

[drummer4hire24]

thanks 4 the tips Dan.

what wire size are you using 030 or 023 ?

[Hoolie2899]

Where are your protective clothing and work shoes?

Welding nekkid will come back to bite you in the end..

[danbethel]

Your Mom came and took them

[Hoolie2899]

@danbethel

What? Did i offend mr boogerweld?

The radiaton and UV light and whatnot will fuck you up and what kind of redneck works in the garage with flipflops?

Seen enough during my days as a welder that i take the time to protect myself..

Ignoring safety isn't cool . My old teach will kick my ass for working that way..

[tinymien]

well I think you did a great job, thank you very much for demonstrating. I am still learning.

[tinymien]

ok I see how you did that but what if I want those weld to be smooth and almost flat instead of bumpy and chrome? How would it be polished instead of painted black?

[danbethel]

They'd look shiney. But I can't afford that.

[ezcondition]

that sucks babay!! no angle on tip, too far away, have someone roll the pipe if it's round for away better weld babay!!

[narcolepticpug]

i dont know if your doing it or not. but if your running solid wire without gas. one way to make a good clean weld is.. reverse the polarity as if you were going to use flux. but use silicon bronze wire. crank the heat up real high, run the bead (but move fast so you dont blow holes) and bam. you have a x ray quality weld.... ps. is that flux core? or are you welding galvy.?

[danbethel]

Thanks for the tips bro, and it's flux core.

[pyro8818ak47]

i have a flux core and damn do they suck im paying for the gas and regulator soon cuz the weld is way better. trust me you will be so much happier

[mackinone]

Hey Brother Bethel

I would be ashamed to place that poor welding technique on the net.

Way to much stick out, no gas nozzle and plenty of porosity in your weld, due to lack of gas.

Some people just need to hire an expert, and you are one of those people.

[danbethel]

You are suck a tool........the welds hold, even under the weight of you and your retarded family, you cousin fuckin' fucktard.

[narcolepticpug]

lol.... dont talk unless you know whats up... its called gassless fluxcore.... and with flux thats how the weld will look tell you clean off the slag. it has alot of slag like 7018 rod.... allthough his wire speed is off and hes not the best in the world. im sure the weld is fine. it takes a long time to make a flux wire weld to look as good as a mig... get your certs then come back/

[23tstang]

i love this man!!! mackinone.... i guess real welders are tools :P

but hey at least us tools get the job done RIGHT haha. babAAY!! << tools say gay things like such!

[percymain2]

no shroud

no gas?!

open toed safety sandals too

[danbethel]

Some of us weren't born pussies....

Try too man up a bit.

[tonylee357]

what kind of welder machine are u guys using?

[danbethel]

A Lincoln Welder, Just a standard welder.

[tonylee357]

lincoln welder? not using no oxygen and gas togehter...?? jw need to weld a header

[danbethel]

Nope, just a mig welder, we did used to run gas with it, but honestly, the gas didn't improve the welds. We just turn up the level on the welder, and make sure it has good heat penitration, so the metal bonds, not just a weld over the top of the cut.

[mustangman1987]

should not use flux core welders on big jobs alright babas.

[kpj200]

did you see the bug on the page in the begging of the vid.

[whipthegoat]

"equally annoying to the other drivers".

fuck ya! the only way!

i was cruising around this ritzie part of town and i made a rich ass family, out for a sunday drive, put their top up on their mercedes and they all gave me nasty looks because i have side exhaust and their car was lower and the exhaust exited right in the faces.

[danbethel]

I'm working on it, wiring should be soon, and a few more little things. I was happy with how they turned out.

Dan Bethel-