@WholeTruthZ I'm guessing yes, as it's not specifically marketed for airsoft guns (and airsoft guns are replicas, after all). The difference being maybe that this is really cheap and probably not the best choice for "real steel" :)
@SteamFox Did you put the screws in after using electrical tape? I can see that you pried it open more to put it on the gun but not much was shown after that...
@vash01000100 No, it stays well on place even without them - if I remember correctly, it was actually impossible to use them because they weren't long enough :)
you would think by adding tape it would make it almost impossible to hold zero as the compression would always be working against you, time will tell, might be cool for looks but does it bullseye? prob not for real guns, only airsoft/bb
This ill-fitting laser has destroyed the slide rail on my HFC M190 - it is too small, you have to prise the teeth open with a screwdriver, slide it on (scraping the paint off the gun) and then tighten the nuts. It is so tight, that it has crushed in the walls of the slide rail thus preventing the slide from sliding back and forth, ie.e. killing the gun.
I wish I hadn't bought it. Maybe it was only $20 but it's just cost me a $200+ gun.
Yes, you have to be careful.. But why would you tighten the nuts when it's already too tight..? You sure you can't find a spare rail instead of buying a whole new gun?
Because due to its design, the laser is still loose in the clamp unless the nuts are tightened. I could buy a spare rail and will happily do so, it's just they are not easy to find. Also, the rail is pretty much the whole gun minus the slide and magazine and the bits inside. Unlikely anyone would have this whole body part as a spare. Of course, if anyone does, please let me know..!
A gun is a precision piece of equiptment, nothing on it should be shimmed with electrical tape, under any circumstance. if you can shoot, you dont need a laser sight anyway.
That is true this one is probly not made for a real firearm in that case it really dont matter. And your wrong about the lasers, they will always help your get on target faster, you can fine tune your aim after your there.
If you practice, you do not need a laser sight to get on targer. Train yourself by pulling your gun and aiming at a point on the wall... do it several times daily. Pretty soon, you look at the point on the wall and pull your side arm and the sights go right too it. I plink small pieces of brick out of my driveway with a Kimber 1911 with a .22LR conversion and never really look at the sights.. Practice practice my friend.
i just bought the same laser... i have a quistion. I have a ris rail mount for a scope on the m9vertec, and itchanges all rails to ris. can this still attach?
most lasers dont have warrantys but if it does its normally not worth weighting a few weeks to ship it in and recieve a new one and the shop that i buy most stuff doesnt have warrantys on any airsoft stuff
My shotgun doesn't have any mounts on the bottom, only the sides and the top. I have a scope on top and a light on one side. Could you put a laser site on the side?
does anyone know a laser sight that i dont need to put at teh place of my scope, like under teh barrel( in canada ) for a daisy winchester and i also need a gun stand, like, u know the one that looks like a A at mid barrel, please reply if u know
The laser uses CR123A 3V Lithium batterys. The one that comes with it isn't rechargeable. Don't know if they sell rechargers, but my guess is that these will last quite a long time before draining.
For the other two can't really answer because haven't tried how it looks to 50 yards nor do I know anything about .22 rifles.. But why not? :)
I bought the 65$ dollar version from ebaybanned. Green laser, with everything included. Very powerful and really menacing-looking. Had the same problem fitting it on my HFC m190 (mount needed to be stretched) but it was well worth it. Turn it up towards the sky on a fogy night and you'll look like a jedi.
The problem with powerful green lasers is that they are too powerful; unless everyone agrees that you may fry their eyes with it, I wouldn't recommend using it in a match.
Other than that green lasers are cool and it's not like lasers are very useful in most games anyway.. Anyway you probably knew all this, just writing it here for the general public to read :)
Where did u buy it?
jbsniper892 3 weeks ago
slick
johnnyViDeO 1 month ago
Where can I get one of these at?
benny041988 1 month ago
@benny041988 Check 0:35.
SteamFox 1 month ago
Picatinny Rail?
oldoldhippie 4 months ago
Nvm
endowrider 5 months ago
Where did u buy the laser?
endowrider 5 months ago
hitman :D
Digadogup 6 months ago
i found a laser today for $30 it attatches to a sniper scope but i dont have a scope :P
koolium 7 months ago
where do you get the elastic band kinda thing? i need it :( lol
1mikee26 7 months ago
where do you get the elactic band kinda thing? i need it :( lol
1mikee26 7 months ago
If snoopy like, then i like
mkjredemption 8 months ago
maybe ok for a bb gun or airsoft. wouldn't bet my life on it.
romansten9 8 months ago
u used a live type template, didn't you?
npinsk 9 months ago
@npinsk Yes, I think I used a slightly modified template.
SteamFox 8 months ago
Will this fit on my KWA USP compact?
EfrenEsparza 9 months ago
sick
isaycharlie 9 months ago
Do u have to press and hold the pressure pad to keep the laser on?
Felikraven 9 months ago
@Felikraven yeah thats the point, but theres a constant on piece like he showed early in the video
Lordofthyself 7 months ago
Do you have to keep pressing it?
MaartenOwnd 9 months ago
I think its a Laser pointer, not Laser sight.
valttu94 11 months ago
Great production, very nice video. Explained everything really well.
Would this laser fit on a real handgun? I'm guessing it would, what's the difference?
WholeTruthZ 11 months ago
@WholeTruthZ I'm guessing yes, as it's not specifically marketed for airsoft guns (and airsoft guns are replicas, after all). The difference being maybe that this is really cheap and probably not the best choice for "real steel" :)
SteamFox 11 months ago
@SteamFox Thanks for the speedy reply
WholeTruthZ 11 months ago
hi there...do you think this setup will work on my cz100?
shadowrsv 11 months ago
great video production! keep them up!
mixtown 1 year ago
@mixtown Thanks!
SteamFox 1 year ago
Hey, where do you buy this?
LieutenantGhostrider 1 year ago
How much mW does it have?
AntoxaBatoxa 1 year ago
@AntoxaBatoxa Can't remember anymore. Look it up on dealextreme. Anything above 5mW isn't recommended anyway..
SteamFox 1 year ago
@AntoxaBatoxa it is 5mW and the green laser is 20
genocide200869 1 year ago
cud it mount a m85 rail?
SammyboySuper123 1 year ago
(elvensbane) it mounts on 20mm rails
CRU1S3R79 1 year ago
does this mount on 10mm or 30mm?
elvensbane 1 year ago
was a nice video production.
relicright 1 year ago 2
hey did this come with a mount to clamp to a barrel? or just the rail mount?
i heard there is a problem with the adj screws being to short to actually zero the laser in.. have any problems with that?
opisex 1 year ago
omh where have i heard this song, please someone tell me
dirtydirtyschoolgirl 1 year ago
@dirtydirtyschoolgirl
hitman blood money
opisex 1 year ago
hehe love this song
(0_o) b
JUBA223 1 year ago
Comment removed
vash01000100 1 year ago
how do you mount the remote switch so its in a usable location?
theblueteam10 1 year ago
@theblueteam10 Do what I did on the video: use a rubber band.
SteamFox 1 year ago
@SteamFox Did you put the screws in after using electrical tape? I can see that you pried it open more to put it on the gun but not much was shown after that...
vash01000100 1 year ago
@vash01000100 No, it stays well on place even without them - if I remember correctly, it was actually impossible to use them because they weren't long enough :)
SteamFox 1 year ago
i just got the m19 gbb and am thinking about getting this for it cool vid
jumpy441 1 year ago
Malthus101, the HFC m190 is about $85 on most websites, if you bought it for around 200, you got ripped big time...
TheMcbro 1 year ago
what? you have to hold the pad down to keep the laser goin. or is there a switch to keep it on
XXXxxxGAVESxxxXXX 1 year ago
I would rather have night sights.
Fallout33tuollaF 1 year ago
@Fallout33tuollaF whats that?
XXXxxxGAVESxxxXXX 1 year ago
@XXXxxxGAVESxxxXXX There sights that glow in the dark at night time.
Fallout33tuollaF 1 year ago
I can see allll of the modding potential this laser sight has....MUAHAHAHA! Blue beam of doom!
SecretAsianMan0 1 year ago
does it work in the light
plz reply
TheBiskey 1 year ago
@TheBiskey yes it works, but you might have difficulties seeing the red spot :)
SteamFox 1 year ago
you would think by adding tape it would make it almost impossible to hold zero as the compression would always be working against you, time will tell, might be cool for looks but does it bullseye? prob not for real guns, only airsoft/bb
freesoulvw 1 year ago
Comment removed
stfuboy 1 year ago
I love that Hitman song!!! i got the album and this laser kicks! ass!!!! link please!
noze007 2 years ago
do you have to push the pressure pad down hard?
Vandyfan8000 2 years ago
Comment removed
joshuaryung 2 years ago
Comment removed
joshuaryung 2 years ago
what video editing program you got?
12GaugeLosAngeles 2 years ago
Adobe Premiere. The titles are made with LiveType.
SteamFox 2 years ago
This ill-fitting laser has destroyed the slide rail on my HFC M190 - it is too small, you have to prise the teeth open with a screwdriver, slide it on (scraping the paint off the gun) and then tighten the nuts. It is so tight, that it has crushed in the walls of the slide rail thus preventing the slide from sliding back and forth, ie.e. killing the gun.
I wish I hadn't bought it. Maybe it was only $20 but it's just cost me a $200+ gun.
malthus101 2 years ago
Yes, you have to be careful.. But why would you tighten the nuts when it's already too tight..? You sure you can't find a spare rail instead of buying a whole new gun?
SteamFox 2 years ago
Because due to its design, the laser is still loose in the clamp unless the nuts are tightened. I could buy a spare rail and will happily do so, it's just they are not easy to find. Also, the rail is pretty much the whole gun minus the slide and magazine and the bits inside. Unlikely anyone would have this whole body part as a spare. Of course, if anyone does, please let me know..!
malthus101 2 years ago
did you consider using electrical tape to close the gap between the laser and the clamp?
MessiahsCreed 2 years ago
Too bad lasers for real guns aren't that cheap.
geniusiknowit 2 years ago
Thanks for the info, even though I wouldn't have a gun anyway. Kudos on your neat video, too.
eygens 2 years ago
where did you buy this laster from?
emkplayboy6 2 years ago
Both of your questions are answered in the video.
SteamFox 2 years ago
Can you adjust the elevation and stuff on this thing?
emkplayboy6 2 years ago
i give it around 3 and a half
SuperRattles 2 years ago
i got that laser on ehobby asia
SuperRattles 2 years ago
5 star for Snoopy at the end.
AllYouHearIsSwoosh 2 years ago
wow this looks professional
TwiceVicodin 2 years ago
gt one like this off ebay, came with rail and scope mount, and two buttons one is a click and other is pressure, i saw this one two
THEHUNTER096 2 years ago
where do i buy this laser
akeemg2k8 2 years ago
Do you think that would work and be suitable on a Crosman Stinger R34?
ApacheTaskForce 2 years ago
lol that thing costs as much as that gun
Sk84dates 2 years ago
that gun happens to be a "special force" gas (some full metal) blow back gun full/semi auto...
gamin4lif3 2 years ago
@Sk84dates what are you talking about? the M190 / M9 / M92 GBB is $90 and up. Unless you mean the spring version of it.
vash01000100 1 year ago
oooo my fav pistol M92fs... i think.
THURGOODa 2 years ago
Nope, this would actually be the newer Beretta 90-Two.
Sinnikk 2 years ago
which is the 40 cal i have the taurus version pt 101 i just might get this laser
404040c 2 years ago
where can i buy this laser???
DJOutland 2 years ago
Do you think this would fit on an echo 1 scar?
but yeah great vid btw.
and what is the full name of the laser?
cubankid587 2 years ago
I'd get a laser sight for a submachine-style paintball gun, and a red dot sight for a rifle-style paintball gun.
DarthMonkeyBoy 2 years ago
i am getting a similar laser sight for £4 inc postage of ebay from hk
vrz07 2 years ago
excellent review! i really enjoyed the edits & other creative elements!
vengence1979 2 years ago
Thank you very much! :)
SteamFox 2 years ago
hi can this laser fit on to any air pistol?
vrz07 2 years ago
k i really dont get this
at canadian tire this same lazer is 30.00 but they have a dot sight for 25 .....
WHY THE FUCK WOULD U BUY THE FUCKING LAZER
suzuki834 2 years ago
Because laser and "dot sight" are two different things?
SteamFox 2 years ago
i commented befor i saw that it was on a hand gun i was pickturing it on a rifle
suzuki834 2 years ago
Red dot- requires you to aim down the sights
lazer- does not require you to aim down the sights
xGothimox 2 years ago
i know like i said before i thoght it was on a rifle
cause i didnt watch the hole thing before commenting
suzuki834 2 years ago
but useless at long range and during the day........
Blackwing0820 2 years ago
b/c a $25 red dot sight is a waste of money?
DC211228 2 years ago
Hi I wanted to ask you from where you this airsoft and your laser has because I would also like to buy one to myself
Littlefire38 2 years ago
0:35 is where you can get the laser.
The gun is from local shop, you can't get it from there..
SteamFox 2 years ago
excellent review! i really enjoyed the edits & other creative elements!
i think this will be perfect for my dad's mossberg pump shotgun. i don't think i would like the cable for my glock 26 though....
johnfranks 2 years ago
where does the wire on the back go to?
dsandiego95 2 years ago
To the switch special man and you can take it off and put another battery cover on so you dont have to hold the button
srnine9mm 2 years ago
you think that would fit on a tippmann alpha black ?
depmoi 2 years ago
that snoopy was so cute at the end :3
FluffyOpossum 2 years ago
will a laser fit on a kwc beretta 92fs??
ZeppelinFreak13 2 years ago
all it needs is a tac rail and any rifle/ pistol lasers will fit.
sk8ersam09 2 years ago
i just got my JG-4 today! i love it! :D
great value!!
RABBITSMOGET 2 years ago
i saw a really good pistol grip that had a laser light on the right side of the trigger and i said ohhh i have to have that for my desert eagle
alexmini123 2 years ago
nice video!
samh556 3 years ago
Sweet video man!
decoder111 3 years ago
lovin the hitman music
SMGleader 3 years ago
"thus the electrical tape"...LOL! that says it all right there! JUNK.
NoSweatOffMySack 3 years ago
Just because you have to make a little modification doesn't mean it's junk. But I see your point ;)
SteamFox 3 years ago
A gun is a precision piece of equiptment, nothing on it should be shimmed with electrical tape, under any circumstance. if you can shoot, you dont need a laser sight anyway.
NoSweatOffMySack 3 years ago
You did notice this is an airsoft-gun? If yes, then lets agree to disagree.
SteamFox 3 years ago
That is true this one is probly not made for a real firearm in that case it really dont matter. And your wrong about the lasers, they will always help your get on target faster, you can fine tune your aim after your there.
srnine9mm 2 years ago
If you practice, you do not need a laser sight to get on targer. Train yourself by pulling your gun and aiming at a point on the wall... do it several times daily. Pretty soon, you look at the point on the wall and pull your side arm and the sights go right too it. I plink small pieces of brick out of my driveway with a Kimber 1911 with a .22LR conversion and never really look at the sights.. Practice practice my friend.
NoSweatOffMySack 2 years ago
WOW nice camera work.... nice vid
SeaND0uble 3 years ago
where did you get this from plz reply asap
arse43 3 years ago
dealextream :)
butterfenco 3 years ago
does this work on tri rails?
dandjvids 3 years ago
Nice. NICE¬. I love it. btw what software were you using?
Nanovirus5995 3 years ago
Thanks! Titles were made with Livetype and the rest was edited with Final Cut Studio (although I use Premiere much more).
SteamFox 3 years ago
wow great job, i was supprised by how much effort was in it
ghillierecon 3 years ago
will it fit the bottom rail of the daist 15xt plz reponse
alfonso908 3 years ago
great edit..love the laser..
alkayda101 3 years ago
VERY good info in this video, Plus I really liked the work you put into editting this, unlike the crappy reviews done by others. THANKS!
AUFlyingAce 3 years ago
Great video. I think I'm going to buy that laser now!
lynusluver 3 years ago
what is the range
Eicles 3 years ago
Pyramidair(.)com has one for 9.99 pretty much the same thing with more accessories. But good video. Love the music, lol ;p
Shadowstep6278 3 years ago
The music in the backround is from "Hitman Blood Money (Game)".
BothtaweeKelly 3 years ago
Sotty I didn't realize you had that on the discription already. Anyways, love the music, love the video.
BothtaweeKelly 3 years ago
Im looking for a laser sight for my beretta M9
but i cant seem to find one that would fit perfectly.Does anyone know if there is one and how much does it cost?
stivking 3 years ago
good editing
burtonxboarder 3 years ago
nice laser sights,chinabestsuppliersdotcom
aqueen201 3 years ago
is it possible to put it onto uhc m92?
misheel123 3 years ago
It's possible to mount this laser in a Glock Pistol G25 Model?
fermixv 3 years ago
If it has a mounting rail, then yes.
SteamFox 3 years ago
whats a good laser to get? i dont want like top of the line just something with a pressure switch and that will last a while
Hayloh3fan 3 years ago
i just bought the same laser... i have a quistion. I have a ris rail mount for a scope on the m9vertec, and itchanges all rails to ris. can this still attach?
CAPTAINOCTAVE 3 years ago
ya you can
Uagathy1 3 years ago
watch the video of the pistl on my account... kinda dark, but i have to say i think its the bestiest pistol ive ever seen.
CAPTAINOCTAVE 3 years ago
Wow awesome video
Branflakes91093 3 years ago
great use of the computer mate! now how long does that thing last im tired of buying lasers that last about 2 weeks and break
cottonmouth101 3 years ago
Well it feels very sturdy, but I haven't used it enough to draw conclusions. Why don't you just buy something that has a warranty.
SteamFox 3 years ago
most lasers dont have warrantys but if it does its normally not worth weighting a few weeks to ship it in and recieve a new one and the shop that i buy most stuff doesnt have warrantys on any airsoft stuff
cottonmouth101 3 years ago
1 year warranty,chinabestsuppliersdotcom
aqueen201 3 years ago
i feel sorry for you im about to get for $5NZ which is like US$4
stifmyster1 3 years ago
love the hitman blood money vegas song :P
Snakx3 3 years ago
thanks
ComputerLearner 3 years ago
hahah snoopy likez it huh shyt i take me one than. sweet vid bro
duranesjoker 3 years ago
what is that band sort of thing called?
zamy4eva 3 years ago
LOL AWESOME VIDEO AND REVIEW...
bigrtard 3 years ago
why did you use splinter cell music
conan5567 3 years ago
hello people, does this laser sight have a name or model e.t.c :D ?
robertlucky 3 years ago
Did you watch the video? ;)
SteamFox 3 years ago
My shotgun doesn't have any mounts on the bottom, only the sides and the top. I have a scope on top and a light on one side. Could you put a laser site on the side?
Relytsyah 3 years ago
Yes
BroodHrdyJr 3 years ago
wow you are very good at video editing.
DarkOsirisRose 3 years ago
ok,thanks Steamfox
a12 OUT
a122222222 3 years ago
steamfox,could i put a laser sight on my kwc spring pistol?
-thanks, a12..
a122222222 3 years ago
If it has the required rail why not? But the sight can't be too heavy compared to the gun or it'll feel ackward and/or brake it..
SteamFox 3 years ago
mistäs ostit ton laitoksen?
J0uzze 3 years ago
Katsopa 00:35.
SteamFox 3 years ago
Aaa sori en huomannut, etin pelkästään siitä alusta tota kauppaa.
J0uzze 3 years ago
What is the music used?
Azuriitko 4 years ago
Have a look at the video description.
SteamFox 4 years ago
:) my bad
Azuriitko 4 years ago
This was very helpful. And a great video. I buying this :)
motormuil 4 years ago
does anyone know a laser sight that i dont need to put at teh place of my scope, like under teh barrel( in canada ) for a daisy winchester and i also need a gun stand, like, u know the one that looks like a A at mid barrel, please reply if u know
eliankou 4 years ago
nice video editing + recording
good music
ikkebenjens 4 years ago
Thanks!
SteamFox 4 years ago
cool vid mate
3 q's
do dealextreme sell rechargers fo these batteries?
how big it the red dot out to 50 yards
do you think it would be good for a .22 rifle?
jonutarr 4 years ago
The laser uses CR123A 3V Lithium batterys. The one that comes with it isn't rechargeable. Don't know if they sell rechargers, but my guess is that these will last quite a long time before draining.
For the other two can't really answer because haven't tried how it looks to 50 yards nor do I know anything about .22 rifles.. But why not? :)
SteamFox 4 years ago
I bought the 65$ dollar version from ebaybanned. Green laser, with everything included. Very powerful and really menacing-looking. Had the same problem fitting it on my HFC m190 (mount needed to be stretched) but it was well worth it. Turn it up towards the sky on a fogy night and you'll look like a jedi.
bogdan192 4 years ago
The problem with powerful green lasers is that they are too powerful; unless everyone agrees that you may fry their eyes with it, I wouldn't recommend using it in a match.
Other than that green lasers are cool and it's not like lasers are very useful in most games anyway.. Anyway you probably knew all this, just writing it here for the general public to read :)
SteamFox 4 years ago
lol like a jedi, remember though same thing applies never look directly into the lightsaber
asiandude77 4 years ago
you would do better to ut it on a bigger gun. sumtin like an m4 or m16 or ak if you own 1
LeeMaher06 4 years ago