R/C Lowrider truck w/hydraulics......driving around

[HighRum13]

I can't wait to see you sell this man, you are gunna make a but load! Great work!!

[sdimes10]

I sent you a message on here if u would plz get back with me and I would greatly appreciate it. Thanks

[NokturnalHtx]

I want one I want one I want one!!!!!! ------ crying like a little kid

[aldoaldo9100]

the truck you did you or did you buy?

[ThePattonboy123]

Where did you get this? Sick as hell haha

[13Jaysun13]

You sir, are a servo master. Will you sell this truck?

[malibu45680]

man that's a killer set up i got an 1982 c-10 and i would like to see when ever you are ready to sell one let me know i want one man that little truck is sick.....great job...

[simonz28]

thats awesome work .. ive always wanted to see a clod buster body done like that

and you nailed it !!

well done ..

[diamond244815]

i can deal with out the hydraulics but does anyone know where i can buy that body

[Khaos5591]

That's hella sick do u sell them

[alfredo59735]

man, this is fucking amazing =D

[airtrifle]

plz can i buy 1 jokes but id is so kl

[firekilller13]

sweet



[mad3inchicag0]

super fake g0od job on the graphics tho

[jonathantrans4567]

@mad3inchicag0 this shit is real

[ezescousin14213]

would be pretty fucked up if a car came by and ran it over

[carter8766]

I always wanted 1 man they're cool..r the hydros servos or Wut..I use 2 do hydro models but never could figure out how 2 make them r/c.cool

[gorsk69]

VERY cool!

[totallyawsomebigfart]

DOPE DOG

[Stylensky]

Nice job.

[griffinmayne]

great work and detail.

[MrFrankier27]

Man i wish i had 1 of those in real life

[arkone77]

Is there a site I can get one of these at message me a link please thnks

[98cumminscoalroller1]

1/64 scale?

[blazeratw]

nerd



[computer0722]

that is like the nicest rc truck ive seen wow , Kudos!!

[jaymzedge1]

I need an RC dunp truck can I borrow yours? HAHA JK I am not a fan of low riders and hydraulics, but I will say since it is scratch built mostly, great work good bit of engineering there.

[shadowgiratina1998]

plz learn me how to do it

[jeepin2485]

this thing is cool. what would it cost me to have you build me one. send me a message on you tube.

[LastK5]

Very nice work. You've built a pretty awesome truck - thanks for sharing!

[andusasghost12]

i want like that bro.nice truck.where i can got lowrider rc bro ?please help bro .thx

[210gunz]

IF YOU WANNA MAKE ONE YOU CAN GO TO HYDRO HOPPERS AND YOU CAN MAKE ONE FOR LESS THAN 50 BUCKS AND IT DOES MORE TRICKS THAN THIS RADIO SHACK SHIT! LMAO

[berndiggydiggy]

ITS SO SCALE!!! I was expecting a 5and a half inch cholo to step out.

[TheGabboss]

is it for sale

[nolo148]

what chassis is this?

[Wolfangel37]

There are very few parts from an actual R/C car on this truck. It has a scratchbuilt brass frame.......I am using a-arms and a rear center section from an r/c car....that is it.....everything else is handbuilt.  This does NOT have an available r/c car chassis under it.

[2low4snow1]

@Wolfangel37 Is there a possibility that anywhere in the world can you buy something close to this work of art?? and I thought i saw you say that u may be making more to sell, Is that true??

[mahrenballs]

I just had to say I'm glad I saw this video because that is just true artwork...The attention to detail is incredible and it actually hurt a little when I read it wasn't for sale! lol Mad props man you deserve it and I hope you get it patented cause I'd camp outside a damn hobby shop for a week for this one if I had to man!!

[tillyb1989]

All it is is servo's and rods. He said in the last video he hooked servo's up to the shock's. Its not that hard to figure out how to build one.

[caliboynow]

Respond to this video... thats hellka sick how did u get the hydraulics

[Wolfangel37]

Like it says at the start of the video.....NOT FOR SALE. Sorry

[074nathan]

@Wolfangel37 i give you 1 million dollars for that toy!

[79cutlas1]

$1200 cash....

[alexdevries420]

@79cutlas1 holy crap 1200 $ and still no lmao

[GoyMeyoto]

Autobots! Roll out!

[FASTTRAXXAS]

how much

[TheGoped23]

Nice man im a crawler guy myself and ide like to know how u did this cuz this could come in handy while im crawling

[dvnvaughan]

@TheGoped23 dude think about it its bacally like a crawler with the exciption that its prollly has almost revo push rod supion but instead of shocks servos more of a scaler go to 58 seconds u can see the crawler drive lines as well as the axles this is how he gets the effect that its off the ground an no this probally wont help in a crawler place one exception is that it is a steep incline an lower front an raise the back thats it i to have been crawling for some time to

[Wolfangel37]

@dvnvaughan --- You are right about being crawler driveline......i wanted it to be as real as possible when the bed was raised. I do have a 1/18 scale crawler driveshaft.....but that is is. Everything else is handbuilt. The only parts used off of an r/c car is the rear axle center section and the 2 a-arms in the front. It does have shocks connected between the servo and the suspension.

[alut6793]

my jaw fell open at 0:55

beautiful!

[EYEKANDYKREATIONZ]

this is pretty neat ! !

[treyc3010]

great job dats real nice nd great to see u built it yurself nd didnt buy it

[lapurisima09]

Add some skid plates and drag that bitch (Dropem)

[bradoe2003]

lowriders and rc cars. gotta love it man. nice freakin work

[rkttkr]

Talent, pure talent Wolfangel37.

[MicrotekMybisi]

SICK man... I'd like my 83 to do about half that... lol Nice work man, and great choice in truck! (see mine in my flamethrower in action video)

[hubbard1506]

drag it!

[Pitpointer]

welcome to the club you are selling the club lol great part

[Wolfangel37]

I dont know about this scale, but i have one of those bed-dancing kits.....and isnt it made for 1/24-1/25 scale? This truck is 1/10 scale. Quite a bit larger. If they do have it, thats cool, but this truck is all handbuilt.

[dvnvaughan]

@Wolfangel37 it works like a dump truck effect?

[teveneyes]

its easy to make I finally found a hobby store that have lowrider bodies and rims,hydros, And My Favorite one-the bed dancing kit-for the back for the truck to go up and spin.

[jewci64]

drag that shit

[jewci64]

drag that shit

[skinakagza]

sweet!!!

[renegaderc]

that shit is bad ass wish i could get one somehow

[hobby0rc]

Where did you get the rims?

[lazie82]

that truck moves like jevries 64 impala "RAW DEAL" does it have the same set up?

[kermitjohnson1]

awesome. cant wait to see how you rebuild it

[Wolfangel37]

Nope, sorry. Like it said in the video.......not for sale. I am working on a patent for the design......and i do not want it to be in somebody elses hands until then.

[wessywess6]

cool i hope u get patent then i can buy it

[AReptileMan]

Would you take $1000.00 for it?

[619rudee]

i want to buy one from you.. how much???

[OrenjiGurl]

I want one!

[aliendo1]

Nice!

[3239chevy]

were did u by the hydro for the truck????...

[OtaraCaranalE]

cool

[cwazmann1]

Man your truck is smooth & so realistic too!! Peace!!

[steviecrazy3]

man that is tight how do you do that with scale model let me in on some info

[carolinasled]

I subscribed, I dont want to not be able to find this video again. Very Cool.

[Wolfangel37]

Amyrulez234.........I must say.....that is the most unusual comment i have gotten so far. I dont think i have to worry about giant crabs. And the video was shot in my driveway. Anyway, i am about to change it real good.......it is going to get a repaint.....and it will have a scissor lift bed with a spinning bed. Hopefully have a video up in a month or so.

[Amyrulez234]

i wouldnt want to drive it around on a trail or where ever you were what if some one didnt see it and step on it or a GIANT CRAB eats it

[blazerluver]

I built 1 identical to this. It's been on a lift. Then I found a c 10 chassi that was already dropped. Primered the truck gray. Then painted it candy red and silver. Put scuicidal doors a bed cap with a iPod screen in the back. Make it look custom. Took me a week to get it just right. And 4 days to slam it to the ground. 1st model I've ever had to drop.

[blazerluver]

Haha agreed with the person below me. I built an old chevy model

[hairyalien]

Haha all the comments on these lowrider RC car videos are all the same.

"OMGZ How did you do that?!?!?"

"Where did you buy that?"

"Can I buy it?"

What's wrong with people?

Everyone seems to think there's an easy way to get what they want these days.

It takes time and skill to create something like this.

Great work man.

Love it!

[chevyken86]

sick,sick,sick!!! first i love older chevys, second i build model trucks, and third i really want that truck!!! wat all did u use? that thing is sick!!!

[pantablo]

That's pretty awesome.

[vicandgloria]

thats one sick truck son!!!!

[Wolfangel37]

I made it. You cant buy it anywhere.

[bmanwhiteboy95]

you were did u get that i want reply to this comment

[Wolfangel37]

Sorry man, its not for sale. Its the only one i know of like it. Im sure there are others that are better, but, i cant sell this one. Sorry.

[josezavala816]

thats kool can u make one like it

[josezavala816]

how much u want 4 that itz sooo cool

[Wolfangel37]

ANTTZZPA---the body is from a Tamiya Clodbuster 4x4 monster truck. Its a hard plastic body, not lexan. It was a one piece body, but i cut the bed off to make it tilt.

[annttzzpa]

where did you get the truck body from?

[ramblagurl]

could you build me one of those trucks, how much would it cost?

[labreck12]

WOW i wish i could build one.. so sick

[NTComputer86]

you should get this patented and on shelves, It would be a hit!

[vincecarder]

Wow...pretty sick..

[jevries]

I LOVE that truck!! It works like a charm, it looks good and it lays low! Good job man!

[Wolfangel37]

Let me know what you think