The actuall concept of this is quite simple, but I never would have thought of doing it that way. That algorithm you showed is really just a commutator. The only part that could prove to be confusing memorizing wich way to turn every corner.
At around 8:05-8:25 you do D' F to get the white, green, orange corner up into the buffer zone from the bottom layer (position 6 I think). Is there any particular reason why you can't just do F2?
the buffer zone(bottom left of U face)is where u place ur corners to orient them. if u need to orient a corner in eg the bottom right of the F face,u would need to rotate that corner so its in the buffer zone,without disturbing the disturb zone. then u just perform the required alg to orient that corner IN the buffer zone. u can only disturb the disturb zone if u r doing an alg. when u have oriented the corner that u placed in the buffer zone,reverse what u did 2 get the piece in the buffer zone
Ha-ha 1 Im proud i could do it in 21 Sec.!! My Record is 16. Go Cubers!! Happy Cubing and uh by the way kylek1127. Your wrong. Im am no nerd. Neither is him. Also Lrn how 2 spell rite wuld ya? And dont call this guy a KID. Hes a guy.
i was tryin to learn how to solve how to a rubiks cube and i jus clicked on this video to see how hard solvin a rubiks cube blindfolded was and if u read my comment up above u would hav seen that im not callin any1 who does the rubiks cube a nerd im jus sayin this kid is a nerd.
everytime i have a piece in the front right corner not oriented but when i try to put it in the buffer zone to solve it and i put it back it doesnt get oriented right and the blue or green piece doesnt face up and thats the same with the back too
Your very detailed. I tried learning from seerusgod, he's a very good teacher as well but he's just a little impatient, whereas you want to make sure you cover everything. Thank you, hopefully all your tutorials will help me blindsolve. I have strept so i can't go to school tommorow so this will be my entertainment for tonight, cause I slept all day. Lol.
huh? 8 months? im just over 2, i avg 28 secs as well, i learned all plls and olls =p i think if i can remember 80+ algs ( including f2l special cases) then i should be able to do this =p
I think I am ready. I have been cubing for 8 months and I average 29 seconds. I really want to learn how to bld solve but I do not understand macky's method.
The actuall concept of this is quite simple, but I never would have thought of doing it that way. That algorithm you showed is really just a commutator. The only part that could prove to be confusing memorizing wich way to turn every corner.
Elrog3 6 hours ago
how is it blindsolving when he has to orientate the corners first while looking at it ?
razz0404 1 year ago
@razz0404
Because he isnt going to do that in the comp....
Duh!!!!
rennboyz 1 year ago
"There are two steps of solving the rubiks cube. in this video im going to show you the three steps..." WTF?
SuperMegaPeanut 1 year ago
woooow... I'm waaaay too tired to learn that now :S I subscriped anyway -I'm gonna start learning it another day ;D
JustCallMeFreak 2 years ago
TYVVVVVVVVVM
x0teehee0x 2 years ago
This has been flagged as spam show
i didnt get your video
technoholic562 2 years ago
thath ith hard....
makulitkaha 2 years ago
you look like rock lee from naruto the tv show
lambo6519 2 years ago
hahaha i was thinking the same thing lol
GAGE15RAW 2 years ago
You eyes are so gayfull :D
RUL1S88 2 years ago 4
kewl so far this is easy, but i still dont think ill be able do it at the end
highflyer916 2 years ago
why do you use beginner's notation (i instead of ') if you say this is an advanced video?
I don't mind myself, but I'm just wondering
d4m4s74 2 years ago
i dont get it Dx
x3AngelDeFeux3 2 years ago
awsome!
so far... XD
feba95 3 years ago
i dont get it
rubiklegend 3 years ago
i dont get it
aoyamasgirl 3 years ago
smarrtttyyy :D
BeastOnProductions 3 years ago
wow. ur pupils are huge. Nice vid though.
jedipatster 3 years ago
This comment has received too many negative votes show
YOU IDIOT YOU DID L INSTEAD OF Li IN YOU FIRST ALGORITHM. LEARN THE STUFF BEFORE YOU TEACH IT YOU QUEER!
gordonj005 3 years ago
...you can't be serious
floatingcloud 3 years ago 4
This comment has received too many negative votes show
lol this guys queer
wakeboard023 3 years ago
For your second example why didn't you just do F2
Hersirheros 3 years ago
excellent video
rememberthe314 3 years ago 6
This has been flagged as spam show
i agree
fucking racist moms
deaner123987 3 years ago
where did u learn how to solve it like tht like where did u get the instructions or who taught u? or where did u go to learn tht?
ginobilishuffler 3 years ago
peter?
edw0010 3 years ago
im so confused
fallintotheabyss 3 years ago 2
This has been flagged as spam show
fuck u
luiz10112 3 years ago
When I am on the edge step, I always get a stream of 24 letters, when it should be about 12 waht is wrong. I double chek
Rubiksguy 3 years ago
This has been flagged as spam show
lol
Dazizco 3 years ago
how come when i get the 7 corners oriented the undisturbed isn't oriented?
Dazizco 3 years ago
tht means uve been switching stickers (or pullig it apart and putting it bak 2gether wrong)
envy2530 3 years ago
you remind me of the guy from wonder years....
gerbiluvdoom 3 years ago
At around 8:05-8:25 you do D' F to get the white, green, orange corner up into the buffer zone from the bottom layer (position 6 I think). Is there any particular reason why you can't just do F2?
Keith ;)
keithrx3c 3 years ago
do i do both of the algorithms
xxshadow910 3 years ago
those words are important
Ram012593 4 years ago 3
This has been flagged as spam show
boring... to many words... too little teaching
tansingco0thea 4 years ago
uhh... last time I checked you have to talk to teach.
Grintoth 4 years ago
This has been flagged as spam show
ya know what i hate? people with black hair.
sniper947 4 years ago
that comment was not just mean, but racist in a way
philliesrule3690 4 years ago 7
i dont think he even has black hair
tansingco0thea 4 years ago 2
black haired people arn't a race but i know what you mean and good on you for saying what ya think!!!
Go Grintoth
edw0010 4 years ago
black haired people arn't a race but i know what you mean and good on you for saying what ya think!!!
Go Grintoth
edw0010 4 years ago
This has been flagged as spam show
your mom is racist to your other mom
sniper947 3 years ago
you know what i hate?
haters like you
junhyuk 4 years ago
i think it would be funny if sniper had black hair..
PlatypusCubes 4 years ago
I don't even have black hair...
Grintoth 3 years ago
no, sniper said he hates people with black hair
alice61 3 years ago
i dont understand why theres a left inverted and left algorithum, which one do i apply w=to which situation..?
opuim123 4 years ago
Left inverted...what algorithms are you talking about?
Grintoth 4 years ago
dude nice vid, like the other people i kinda dident get it in the begening but it is really easy... thanks!!!
queenlovertheone 4 years ago
no puedes hacer un video enseñando el blindfold cubing en español???
davidr216 4 years ago
very good video !!! in the beginning I didn't understand it later on i did ! thx
martijnowned 4 years ago
nice thanks, that was really clear and easy to learn from, if you guys don't get it, then you must not be very familiar with the cube -_-
afmaspd 4 years ago
-__- i am just saying i dont really understand at the first try,now i understand it -_-
bboydragon29125 4 years ago
i still dont get wut it means by disturbance zone and buffer zone damn it
bboydragon29125 4 years ago
the buffer zone(bottom left of U face)is where u place ur corners to orient them. if u need to orient a corner in eg the bottom right of the F face,u would need to rotate that corner so its in the buffer zone,without disturbing the disturb zone. then u just perform the required alg to orient that corner IN the buffer zone. u can only disturb the disturb zone if u r doing an alg. when u have oriented the corner that u placed in the buffer zone,reverse what u did 2 get the piece in the buffer zone
sydhuman 4 years ago
ya,i already got that,thanks =D
bboydragon29125 4 years ago
hey i learnedall the algorithems and stuff but i was hoping if you could make a memorization video from the begining cuz im kind getting cunfused thx
runnerban 4 years ago
Aye, I learned it this summer and I can solve it in 33.485 seconds so... I can still do this right?
Darkwagon 4 years ago
Yep.
Grintoth 4 years ago
What's i Mean in the Algorithum
timbrand333 4 years ago
It means inverted, so you do the opposite of what it is usually, like F is turn clockwise , Fi is turn clockwise.
inukagekun 4 years ago
(to timbrand333) If you don't know standard notation, you probably shouldn't be learning how to blindsolve.
Grintoth 4 years ago
This comment has received too many negative votes show
nerd
kylek1127 4 years ago
noob
dextiir 4 years ago
go ahead call us rubiks cube geniuses nerds we'll just say shut up..... on that note.... "SHUT UP!!!"
petenator112 4 years ago
um we are nerds. but theirs nothing wrong with that. my freinds love watching me do Rubiks cubes
wikedgamers 4 years ago
we are "pure Genius"
PestVic 4 years ago
hell yeah bitch (.).)
mrdrjeffsir12696 4 years ago
the rubiks cube is just a toy. just because we can solve a toy doesnt mean were nerds.
nace112 4 years ago 3
im not callin any1 who does the rubiks cube a nerd im jus sayin this kid is but im sorry and i shulda never said it
kylek1127 4 years ago
i can do a rubiks cube in 38 seconds but by no means am i a nerd i fucking kick the shit out of nerds
mrdrjeffsir12696 4 years ago
yea i can do it in 2 min
kylek1127 4 years ago
Ha-ha 1 Im proud i could do it in 21 Sec.!! My Record is 16. Go Cubers!! Happy Cubing and uh by the way kylek1127. Your wrong. Im am no nerd. Neither is him. Also Lrn how 2 spell rite wuld ya? And dont call this guy a KID. Hes a guy.
kaimanathemetalhead 4 years ago
why were you even on this page anyways...?wow
gerbiluvdoom 4 years ago
i was tryin to learn how to solve how to a rubiks cube and i jus clicked on this video to see how hard solvin a rubiks cube blindfolded was and if u read my comment up above u would hav seen that im not callin any1 who does the rubiks cube a nerd im jus sayin this kid is a nerd.
kylek1127 4 years ago
everytime i have a piece in the front right corner not oriented but when i try to put it in the buffer zone to solve it and i put it back it doesnt get oriented right and the blue or green piece doesnt face up and thats the same with the back too
comedynerd2632 4 years ago
I don't know why that would happen. make sure you aren't turning any sides you're not supposed to turn.
Grintoth 4 years ago
This has been flagged as spam show
fkn nurd
lepypas1 4 years ago
evrytime i orientate the bottom corners, the top ones get messed up?
uGottaLUVmel 4 years ago
Make sure you put them back the same way
Grintoth 4 years ago
Your very detailed. I tried learning from seerusgod, he's a very good teacher as well but he's just a little impatient, whereas you want to make sure you cover everything. Thank you, hopefully all your tutorials will help me blindsolve. I have strept so i can't go to school tommorow so this will be my entertainment for tonight, cause I slept all day. Lol.
threeXofXspades 4 years ago
i've tried but i just cant get it. =(
uGottaLUVmel 4 years ago
but this is amazing! so well explained =p
JasonJRY 4 years ago
huh? 8 months? im just over 2, i avg 28 secs as well, i learned all plls and olls =p i think if i can remember 80+ algs ( including f2l special cases) then i should be able to do this =p
JasonJRY 4 years ago
I think I am ready. I have been cubing for 8 months and I average 29 seconds. I really want to learn how to bld solve but I do not understand macky's method.
cube41 4 years ago
you're cute :3
Sithiswhitehand 4 years ago
yucky ducky
tamatalk1 4 years ago
Ha first view, comment and rate sweet any way whats two? Is it the times two or what i dont get it.
kaimanathemetalhead 4 years ago
he means do it twice
seerusgod 4 years ago