Smart Parts Epiphany disassembly

[raeliz12]

You. Are. Adorable!

[TheJack0807]

what can i do if the dire chamber is stuck in the body and simply cant get it out of it ??? i need help pls...

[freerunning10]

hey bro i need help! my epiphany is leaking and i dont know why :S my marker is leaking from the power button... thanks!

[CGOreball]

@freerunning10 A loose hose at the solenoid or banjo fitting, Or it could be worse, the solenoid could have been overpressurized by opening the reg too far. i.e. You would need a new board completely.

[juank12345ps3]

and by the way if the leak is on a hose how would i know?

[juank12345ps3]

hey i need real help with my epiphany today i found a leak and i think it comes from the banjo fittings because one is loose but i dont know how to tighten it plz help

[p8ntballfan]

i got a smart parts epiphany and i really recommend it i like the FREAK barrrel!!!

[pballer45377]

what do the thicker or thinner fire chambers do

[bdm020]

The thicker chambers is more pressure to the gun but rate of fire goes down, thinner chambers release less pressure but you get to shoot at a faster rate of fire.

[LAXchiLL08]

ok ive had my epiphany for like a year with no problems and just today i unsrwed the board to get to the bolt put it back to together checked for leaks and there was a small one. i opened it back up and the hose screw that connects to the regulater snaped in half. jw will they fix it fo free kus the other half is still screwed in... please help

[booyahbla]

WHAT IS THE LIL NOB THING DO BY HE GAS GAGE isnt it to stop the air flow so u can take the tank off witout it bustin?

[booyahbla]

no it cannot use co2 only nitro/compresed air only if it has a specific upgrade it can use co2 but it sucks wit the epiphany

[cburton1995]

Can the epiphany use CO2? Please respond, Thanks

[checkoutjestybeatz]

NO YOU CANNOT USE CO2 WITH THE EPIPHANY

[Pattys2627]

yea use a remote tho

[mrmeatloaf5]

either that or you need a anti siphon adapter to be put inside the co2 tank

[riachk]

does the epiphany use impluse/ion barrel threads or shocker threads?

[hockeypb94]

impulse/ion

[OrcOnAFork]

wolf mother pwns

[PaintballPride]

lol. ass raping music

[shabongo]

is it possible for this gun to have a bolt out the back body

[hockeypb94]

nope put the eos and the shocker and the vibe do

[Sazaka]

Ya, so what color is the better sleeve?

[heynoway1384]

which is the best insert, green, blue, or silver?

and what are the differences between them

[bpion]

nice shop man

[iannsr125]

hi ya just wondering is the eos the new desing epiphany because there is no 2008 epiphany

[trevorswann56]

yes, the eos is the new version of the epiphany

[50M30NE]

no more epiphanys, sadly. sp doesn't support them anymore

[randazzzzzoo]

does the epiphany come with barrel inserts for the freak jr?

[ACDCdude953]

no it only comes with a .693

[greenspank34]

depends i got an insert

[Snopphooy]

do you need to have the same strict maintaince on a epiphany as an ion?

[mabuack123]

not as much the epiphany is much more maintanable and u dont have to clean it as much

[spartanA12]

Does anyone recommend the Epiphany to a noob like me with a descent amount of money

[hotshotMarine]

no its not for noobs its a good gun even pros have been known to use it so get a diff get a ion or spider.

[islander223]

no this is a really nice gun i would get an ion, there way cheaper

[islander223]

no this is a really nice gun i would get an ion, there way cheaper

[ftfpaintballer]

getta vibe

[XDigitalTwitch]

nice vid man

[randazzzzzoo]

metalmosher buy the epiphany cause it comes with a good trigger feedneck and the freak jr. anyone, how come they dont sell epiphany bodykits like the ion? tHAT WOULD BE COOL.

[harvolev]

Because they are interchangeable, you could buy an ion body to put it on your epiphany

[metalmosher3]

im in a huge bind on deciding wether to buy an ion or epiphany any advise?

[hunterc44]

epiphanys are a much better invesment

[shabongo]

Does it need a lot of maintnence? and can someone rate it for me on three things

Durability:

Maintnence:

quality:

[JordanTheBassmasta]

Epiphanies suck.

[Nathrron]

great video but on hint instead of saying this thing goes into this just call it somthing

[xGossipx16]

I have a leak and i think its coming from the Regulator any suggestions?

[BLSNick]

Take your reg off, and take the filter off the top, you dont need it

[CGOreball]

I've already explained that earlier, check out previous posts...

[arturr03]

for what are those rears? and why they put 3 in the stock package?

[dhuffer1977]

where can i find that gun vice???

[haloaddict73]

they still make the epiphany ion998

[vonnzzie]

i love that song guns nice too but myself i would stick with my uped ion

[redwingshockey19]

o nvm i posted that before it said that it does

[redwingshockey19]

does the epiphany have eyes

[Paintballfreak131]

yea i tihnk

[GuitarMan6293]

yes...duh

[redblackepiphany]

this video is good thank you really helpful

[Psyco726]

it isnt that bad on the weight it is like 2 lbs

[0143932823]

heeeeyyyyy someone told me it was a heavy marker can someone tell me if it's true? i'll buy one with a n2 iron tank no aluminium can someone please tell me it's weight??????

[specialedbob]

its seems really light to me

[ion998]

they dont make them any more plus its a bit heavyer then the iopn but not to bad

[remotemans]

is that a good thing if it takes up more room

[mzatFTW]

the faster you shoot the bigger it should be i think.. the size depends on your shooting speed

[burkhardt18]

Everytime I put my NOS tank on my gun it sounds like it is leaking air but shoots find does anyone else have a problem with this.Other than that I love this gun.

[CGOreball]

That's probably because you're using Nitrous Oxide. I'm just making fun. Where's the leak coming from, barrel, trigger, between grip and body....?

[burkhardt18]

right were the tank connects to the gun.

But weird thing is that it doesnt seem to be losing air.

[xXGolfurGodXx]

If your losing air right from where the tank/gun connection you might want to check your o-rings otherwise idk.

[danga6969]

hey dude i just got my epiphany and im brand new 2 paintball ide just like a kinda up close video of how 2 clean and maintain my gun if u could cuz most vidz on here aint the best especially if i dont wanna fuck anythin up thnx dude

[XGCRicochet]

basicly take it apart like an ion and wipe down paint that may have gotten inside.. and dirt and such then dont forget to reoil it before you put it back together=] glad people are picking up the sport

[drewboy91]

hey can u do a reassembly if u havnt...and wat do the different sleves do?im hopefuly bout 2 buy one!!!

[biggy944]

i purchased a Smart Parts Epiphany to day i put it together and it fires once then loses all pressure behind the ball and fires the air out of the trigger from the air overflow pipe but it still fires fast with no pressure not enuff to fire 2nd or 3rd ball .if i fire it once then wait 8 to 10 seconds it fires again ok. i carnt seem to get it to fire more than 1 ball with out the 8sec rest?is it somthing iam doing wrong ?the psi clock shows 260..thanks for any help

[SlipknotMcGee]

It sounds like you over-pressureized it. All of the pressure that was let in blew the soleonoid which would explain why air isnt getting to the valve and is exiting through the trigger. A new solenoid should solve your problems. After you install the new one, turn the velocity ajuster way down to ensure that the solenoid will not blow againwhen you attach you air source.Oh, and just to let you know, the gauge isn't supposed to exceed 200 psi.

[CAPTAINOCTAVE]

what velociy will the gun fire at with the thicest sleeve?

[highenddiesel]

epiphany or promaster

[CSPAINTBALL]

epiphany i own both

[pope120]

where do the eyes come in and how do you remove them ... if you can i am thinking of getting a piff and dont really nkwo much bout em so message me with an answer please

[Mik3p4intb4lL]

y would u take out the eyes then go buy some cheap gun with out eyes y take em out wen ucan turn em off???

[someguy95981]

nice but nopopallowed does a better job at explaining for the n00bs that need it like me

[rrrtttaaarrrddd]

lot of hassle takin it appart

[Watup246]

so what are the sleeves for because i am looking into buying the sets for the ion that uses them if you could tell me that would be great

[CGOreball]

The sleeves take up space in the chamber so not as much air is needed to reach the pressure needed to fire the ball. The thickest sleeve is the most efficient, but, may not allow the marker to fire at 17 rounds per second, it will have dramatic shootdown. The thinner you go, the larger the chamber will be and the more air will be needed to fill that chamber at the proper pressure, but it will have the ability to fire more quickly.

[christiandoy]

hey, i was wondering if you could help figure this out. I just got an epiphany in today and i was wondering why when i degas the marker and try to unscrew the tank, i cant. so basically, i screw in the tank, turn on the asa, turn off asa, get rid of any extra air, and i try to unscrew my hpa tank, and i can't

any help would be greatly appreciated!

[CGOreball]

It does not matter if the valve is on or off on the ASA because there will always be pressure between the tank and the Knob on the ASA. Therefore,even if you degas the marker, there is still pressure against the o-ring and threads of the tank. My suggestion, sit down on a bench, point the marker at the ground, and hold it between your knees/legs, give the tank a 1/2 to 3/4 turn to the left(out). ONLY THEN will the marker completely degas, because you've un-pressed the pin on the tank.

[upurnose46]

i think the music was planned. Its soft in the begining then all of a suden its loud? And the girl walking away from the backround?? hmm

[upurnose46]

ok so what sleeve is better for the stock gun with a virtue board?

[stolein45]

woot joker and the theft is playing in background

[mastajdog5493]

minis r better and a hell of a lot lighter that epiphanys like lead

[bigleon33]

minis r lite but the suck to complicated not friendly user ions really easy virtue board all up grads in gun take a look at leon's ion video not good but can see and hear gun shooting and it will kick your gun ass

[StinkyMojo]

It's

Wolfmother - Joker & The Thief

[xzxtkimxzx]

what song?

sounds like white stripes

[clayphoon326]

id go 4 the rail too prob, protos are really nice. I have a nerve, how is the epiphany?

[hpvs15c]

which is better a pmr or an epiphany? PS: Awesome video!!!!!!!!!!!! Great job

[cj397]

personal preference.

[CSPAINTBALL]

wolf mother haha

[rocknwill003]

mini, epiphany or rail? its so hard!

[p8ntballerking007]

rail, r u a dumbass? jk

[rocknwill003]

i no i made my decision about that a few days ago, i realized that the mini sucks, no upgrades, the epiphany sucks, pretty much an ion. so the rail is my choice.

[p8ntballerking007]

and a good choice

[sasqautch22]

epiphanies dont suck retard or ions see me in airball i will rip ur face off with ur piece of shit rail

[rocknwill003]

its not that ions suck. upgraded. i was just looking for a little more, the rail is just mor hight tec

[cj397]

put a virtue in an epiphany.

[hpvs15c]

I heard that there is no virtue for an epiphany. 

anyways, i got an nxt shocker which is better than any of those. :@

[cj397]

goto virtue's site and look

[crazboy21]

get the epiphany

the rail has bolt problem out of the box the battery weires look fried and brunt and has leaks in the reg

the mini is so sentestiveyou have to have a low pressure tank and set the veloicty right and my tank into mini the soilniod and blew i had to send it back.

[MELOVEPAINTBALL]

which is better the pmr or t

[MELOVEPAINTBALL]

so your saying the epiphany is just a ion with more psi intake??? if thats the case just but a ion!

[m0nkey16]

The Epiphany is juss a ion with mad ps

[berettapaintball]

lets say you get .689 barrel but a .682 paintball the barrel is to big so the inserts will make the barrel .682 so they paint has all of the force of the air and not half

[paintballerseraph]

i meant in the firing chamber

[CGOreball]

The thicker the sleeve, the more space it takes up that air could be filling. It's like puting a brick in the tank of your toilet to save water, only this is air.

[CGOreball]

The Epiphany is like an Ion, but there are differences aside from the milling, the grip is more comfortable, the power button is easier to use, the firing chamber has interchangeable sleeves to kill shootdown and up air efficiency, and the solonoid runs at a higher pressure to allow a faster recharge rate when the different sleeves are in use.

[paintballerseraph]

whats the difference of the inserts other than size and what do they do

[cj397]

made to fit different size balls

[CGOreball]

no, not to fit different size balls, but to fill up the volume of the air chamber inside the marker. You're thinking of the Freak barrel system from Smart Parts that you can change to fit the bore-size of the paint you are shooting. Big difference.

[cj397]

oh my fault i thought he was talking about the freak barrel

[milenkoman]

it is a nice song in fact...

Wolfmother - Joker and the Thief

[Jdtms07]

thats a nice gun clamp you have there. who makes it, where'd you get it?

[CGOreball]

Long time ago when I was a kid, it's my dad's.  I really don't know.

[strat6661]

thanks it was very helpful!

[robeee333]

whats better a bigger sleve or smaller

[demon212]

duno i was wondering that myself

[CGOreball]

The difference in sleeve depends on what speed you are shooting, if you have a QEV, or aftermarket regulator. The long of the short is: it's case sensitive

[ollielangjr]

how do i get the lid off of a suicide shell

[paintballa4life]

do you work at smart parts or something

[Paulson14]

hey iam wondering if u could put the ion virtue board and virtue laser eyes in the Smart Parts Epiphany

[iLLVoKaLz]

Nope, it won't work. The solenoid from the Epiphany is different from the Ion, and the Ion Virtue board isn't compatible with the Epiphany.

The only board you can get for the Epiphany right now, I believe, is the Ion Blackheart. Smart Parts made the Blackheart to be compatible with both Epiphany and Ion solenoids.

The Virtue board for the Epiphany is coming out next month from what the Virtue people told me at LA Open.

[CGOreball]

iLLVoKaLz is right, except for the eyes, the eyes are accepted in the Epiphany.

[iMaciMan]

hey, nice vid. i'm wondering if i should get an 04 angel speed or one of these. Any suggestions?

[CGOreball]

I don't know as much about Angles as I do Shockers and Ions, but just from the standpoint of being able to fix your marker, I would pick a SP, Dye, or Proto marker.

[bigsishio]

Hi dude, i have a question, what is the stock qev of the epiphany? I have one, i think the marker is good, because all the components costs more than 200$. It my opinion...

[CGOreball]

I hate to burst your bubble, but there is no "stock" QEV in a stock Epiphany. The Quick Exhaust Valve is an aftermarket part that allows the marker to run more efficeiently, without a science lesson on how it works.

[Bloodwake14]

PMR'S ROCK

[redbullpaintball]

PMR is better

[Bloodwake14]

its basically a ion its even slower than one only at 15 bps.... pesonally i hate them theres no point in them.. but thats only my onpinion

[CGOreball]

Actually it's Ion programming in the board; so whatever an Ion does, the Epiphany does it as well. The only difference is the solonoid is stronger to handle the higher pressure.

[Bloodwake14]

ye but still its 200 dollars more expensive then the ion and you can build an new solanoid forthe ion just by adding stroger hoses and a stronger qev nothin rele too major. onw queston about it tho. can there bodykits fit on an ion?

[CGOreball]

The body kits can fit the ion.

[firearms2k]

lookin good:P but i don't think i would spend 400 dollars on it, when it has to compete with the Proto Rail, and Invert Mini..

[Garro01]

u dont really need a clamp.

internals look just like an ion.

[CGOreball]

Would you like to hold the marker while I work on it? You're more than welcome. I used it to show what I was doing. They are ion internals.

[yamban]

Dont you work at badlands paintball? Just wondering because you look framiliar...

[CGOreball]

Nope. I do not work there. Actually, that's about 2.5 hrs. away from my field, in the Quad Cities. I've been to the badlands to play but never worked.

[coastie007]

the music makes the video much better nice cowinsedence..also dont buy a gun on looks for the love of god

[CGOreball]

I like it.

[reiDadaMconoRjessE]

is it a good gun? im thinking of buying one

[aznlaosta]

It has better n lighter than the ion

[rudabega4life]

wow... its an ion. i was expecting a much better marker then this. the only difference is realy the looks and solenoid.. SmartParts is trying to pull a fast one on us.

[Johnnybravo60025]

Smart Parts wasn't trying to pull anything. They admitted that it was an upgraded Ion. The shell will be able for purchase as an Ion shell sometime in the future.

[paintballsniper33]

im gona get 1 they look kool