yes i am. and thank you! i need to post new videos. the truck has a set of dynatech longtubes on it. different sound, but like an old school muscle car. :)
actually, the original super bee was based off of the coronet in 1968.
my truck was a rumble bee, yes. but i converted it to a one-off and called it a super bee. i still have plans to supercharge it, hence the name change.
the back piece has been completely modified. it started as three parts, like yours. we dipped the center piece down to work with the new exhaust tips and molded all of the pieces together with a plastic welding product. then it was bondo-fit to the truck, primed, sanded and painted. we attached it to the roll pan with stainless screws.
i got mine from a local guy. he had it on his truck for a while and then sold the truck so he removed the aftermarket parts. however, it's a sir michael's pan. you should be able to find them on ebay or on sir michael's website. they come in unfinished metal, so make sure you have it sealed properly to prevent rust.
my boss has done a ton of mods on his hemi we recently put some doug thorley headers on it and it really woke it up. Huge upgrade from the log exhaust manifolds these trucks come with.
yea headers make a huge difference. i purchased and installed a set of dynatech longtubes on this truck before it went to the SEMA show last year. i need to post some new videos, but wow, what a change.
no, the air box did not have to be removed, but i went with a volant intake. the spacer comes with an inlet tube to replace the HEMI hat so you can connect it to the factory setup. when we customized mine further, the HEMI hat was replaced with the bottom cut out to cover the inlet tube. i guess i should post photos of the truck's engine.
hi. thanks for the comment. we went with this setup because of the design of the ground effects. it may be hard to tell in the video, but the ground effects actually dips in in the center. if we were to put the tips further apart, we would have had to redesign the rear piece.
yep, it's a sir michael's. i had it welded to the truck so there are no gaps. i also had the spare tire hole filled. and thank you for the compliment. :)
hey, love the truck. LQQKs great just have one question. were did you get you roll pan? i would LOVE one for my truck. can u help a brother out thanks. alex from miami
im buying a street scene roll pan to put my 4" tips thru and i was wondering what u think ill send u a link. u have exhaust like i want hidded so when i bag my truck it wont hurt my exhaust. hit me up
Sick paint job!
deweys 6 months ago
sikk ass truk i really like da stripes on it i thought about doin da same on my BEE...do a walk around on your next video id like to c it..
sikRumbleBee 8 months ago
On my rumble bee i've got a 3" exhaust coming from the stock headers and has a magnaflow under it but this thing sound UNREAL!!!
SaskSleds2011 11 months ago
that sounds sick man. My rumble bee has 2 inch on it. i wanted dulls but i dont have the money to get a new back skirt with the other cut out.
GwAr9407 11 months ago
That sounds absolutely amazing. Are you running a resonator with this setup?
02LM7 11 months ago
@02LM7
yes i am. and thank you! i need to post new videos. the truck has a set of dynatech longtubes on it. different sound, but like an old school muscle car. :)
pilotbear327 11 months ago
Are you running dule exhaust or single
nancybaj14 9 months ago
@nancybaj14 single pipe, dual tips.
pilotbear327 9 months ago
You need a transformers badge on the tailgate
ittstudent1989 1 year ago
this makes my balls tingle
MrLongNails1 1 year ago
nice truck how fast is it
5nip3r6 1 year ago
RUMBLE BEE NOT SUPER BEE A SUPER BEE IS A MODDED CHARGER!
airsoftloverusp 1 year ago
@airsoftloverusp
actually, the original super bee was based off of the coronet in 1968.
my truck was a rumble bee, yes. but i converted it to a one-off and called it a super bee. i still have plans to supercharge it, hence the name change.
pilotbear327 1 year ago 2
@pilotbear327 Oh cool i hope on picking up a 74 charger tommorow and supercharging it sometime.
airsoftloverusp 1 year ago
what did you use to fill in the body kit? i no that my daytona has it and they are in parts i like that its all one in the back
paullie300 1 year ago
@paullie300
the back piece has been completely modified. it started as three parts, like yours. we dipped the center piece down to work with the new exhaust tips and molded all of the pieces together with a plastic welding product. then it was bondo-fit to the truck, primed, sanded and painted. we attached it to the roll pan with stainless screws.
pilotbear327 1 year ago
@pilotbear327
cool thank you for the info I plan on working on my truck soon, I will post pictures or a video when its done.
paullie300 1 year ago
Do you have a single or dule exahust, because i am very tossed on what to do for my truck
paullie300 10 months ago
where did you get your rollpan my bumpers messed up few scratchs lol and iv been looking for one
RumbleBee2113 1 year ago
@RumbleBee2113
i got mine from a local guy. he had it on his truck for a while and then sold the truck so he removed the aftermarket parts. however, it's a sir michael's pan. you should be able to find them on ebay or on sir michael's website. they come in unfinished metal, so make sure you have it sealed properly to prevent rust.
pilotbear327 1 year ago
BAD ASS
TKOEST89 1 year ago
my boss has done a ton of mods on his hemi we recently put some doug thorley headers on it and it really woke it up. Huge upgrade from the log exhaust manifolds these trucks come with.
hadin101 1 year ago
@hadin101
yea headers make a huge difference. i purchased and installed a set of dynatech longtubes on this truck before it went to the SEMA show last year. i need to post some new videos, but wow, what a change.
pilotbear327 1 year ago
@pilotbear327 would go wit short tube or would u say they no good i got an 05 5.7l ram i wanna upgrade it dont know wut to do lol
JPJPJP420 1 year ago
Where did you get the exhaust tips from?
DecipheredMindz 1 year ago
@DecipheredMindz
they aren't available anymore and i don't remember the website. sorry!
pilotbear327 1 year ago
hey bro did u have to remove the air box for the spacer?
scampe187 2 years ago
@scampe187
hey bro, i'm not a bro. ;)
no, the air box did not have to be removed, but i went with a volant intake. the spacer comes with an inlet tube to replace the HEMI hat so you can connect it to the factory setup. when we customized mine further, the HEMI hat was replaced with the bottom cut out to cover the inlet tube. i guess i should post photos of the truck's engine.
pilotbear327 2 years ago
sounds great, but i dont like how close the duals are put together. but thats jst me
AKmikeW 2 years ago
hi. thanks for the comment. we went with this setup because of the design of the ground effects. it may be hard to tell in the video, but the ground effects actually dips in in the center. if we were to put the tips further apart, we would have had to redesign the rear piece.
pilotbear327 2 years ago
hey where did u get the tint for the taillights?
smc13s 2 years ago
hello! it's not film tint. i had them sprayed with a smoked paint and then clear coated them. a similar product is VHT nightshade.
pilotbear327 2 years ago
Nice swap. Wish Durangos looked decent with the Rumble Bee / Super Bee trim.
gothemi89 2 years ago
got it sir michael roll pan saw you car domin sorry but i have to say it your very cute no disrespect intended
cruzer2020 2 years ago
yep, it's a sir michael's. i had it welded to the truck so there are no gaps. i also had the spare tire hole filled. and thank you for the compliment. :)
pilotbear327 2 years ago
hey, love the truck. LQQKs great just have one question. were did you get you roll pan? i would LOVE one for my truck. can u help a brother out thanks. alex from miami
cruzer2020 2 years ago
hey..perfect truck..i have a 2005 ram daytona and i was wondering what brand/type of roll pan you have. i love this setup thanks
coolguy3432 2 years ago
hi there. it is a sir michael's roll pan.
pilotbear327 2 years ago
man that exhaust sounds great what is it a magnaflow or what i just loved that sound thats what im looking for to install in my truck
6308902241 2 years ago
If you would have bothered to read the description you wouldn't have had to ask.
HahnsB2 2 years ago
thanks hahns. :)
the muffler is an aeroturbine 3030.
pilotbear327 2 years ago
i love your truck i have a 2nd gen ram , what gears you have on the hemi
amermuscle 2 years ago
Nice work, amazing sound!!
badasspaintballer 2 years ago
thats a sick setup, ur that hot chick from cardomain? arent u, i havent seen this truck in a long time! nice upgrades...
scarface3131983 2 years ago
thank you. yes, i am on cardomain. ;)
pilotbear327 2 years ago
im buying a street scene roll pan to put my 4" tips thru and i was wondering what u think ill send u a link. u have exhaust like i want hidded so when i bag my truck it wont hurt my exhaust. hit me up
riverviewpowerhouse 3 years ago
really cool setup
Trendyrapslut 3 years ago
mann dude that truck looks freakin nice mann! is that lil wing part of the tonneu cover? or is it separate?
stevo0 3 years ago
hi... dudette here. and the wing is built in to the tonneau. thanks for the comment!
pilotbear327 3 years ago
Is that Gaylord bed cover? It looks awesome. If I didn't tow occassionally, I would want my exhaust to come out like that.
zandroes21 3 years ago
yes it is the gaylord TL with the wing. thanks :)
pilotbear327 3 years ago
that set up is fuckin sick. Props.
xtmracer91 3 years ago
nice exhaust
itsafloater 3 years ago
Hows the drone inside?
ramdaspadhye 3 years ago
hardly any. cascade and hushmat help with that, as well, but the aeroturbine 3030 has a nice sound with minimal cab drone.
pilotbear327 3 years ago