Sorry yall.. I haven't looked at this video in years. The car had 72lb injectors. Crower Rods, Wiseco pistons, 72lb injectors, jet ecu, stock cams (upgraded to 272's later), borg warner s262 turbo.
i was there in front of the car . lol i member that dyno day at rocks shop ! but umm "ka24desx" im about to pick up a DOHC from some guy here n greevnille, n imma get richard tha same place where the car sits now but imma get im to help me out with a few things wat should i do 1st ? to start my DOHC BOOST ?
im running 21lbs on a garrett 60mm turbo , just got an AEM EMS. What fuel are you running? I am trying to find some 1300cc or bigger injectors so i can finish an E85 conversion, any idea were to find those message me please, any ways, any ideas on breaking the 400whp range on pump gas?
of course! Gotten spanked and done some spankin as well.. Never know what those cars have until the race is over but not much will get in the way of a built supra on the hwy. nasty nasty cars.
The only ROM tune I like is JWT's program with the 72lb injectors. I don't care a whole lot for their 50lb or 96lb program but the 72lb is incredible. I personally know 5 KA-T guys all making over 500whp with that tune. Also got 30mpg on the hwy!
I would recommend talking to Andy Vaughn at AutoVaughn Performance for a Nistune ECU. Nistune unlocks your factory ECU to function as a real time standalone computer. Look for new Dyno #'s from me in the next few weeks..
ok so i did a 5 speed swap on my 95 s14 but kept the automatic ecu and im goin to install a t25 with stock sr injectors .. but im having some trouble finding an ecu already tuned for it. what do u recommend? or should i just get the 5 speed ecu n get a SAFC?
SAFC's suck. I got one for my ka24de and I dont like it hopefully i will ROM tune soon instead. Right now im running my stock maps with 370cc injectors on a t25. Its running rich but my engine wont blow up
I was using one SAFC II on my last set up and I don't regret. The car was running great and it made 270whp @ 9 psi with 370cc injectors and it wasn't running rich.
It's the Extended Tip S262 and it has 20lbs of boost @ 4200 and 28lbs @ 4600. I'm switching to an S364 or S366 in the next month so look for new numbers soon!
Crower Rods, Wiseco Pistons. ARP headstuds,mainstuds and OEM Fel-pro Headgasket. Turbo is a Borg Warner S362 w/.70 a/r. It currently makes 530whp/455tq @ 25lbs.
@ka24detsx JWT ecu not jet I mistyped that.
ka24detsx 3 days ago
Sorry yall.. I haven't looked at this video in years. The car had 72lb injectors. Crower Rods, Wiseco pistons, 72lb injectors, jet ecu, stock cams (upgraded to 272's later), borg warner s262 turbo.
ka24detsx 2 months ago
Want to know about the set up
kickahlick 2 months ago
What size injectors are you using?
supraman121 4 months ago
Hey man I have a stock 97 240sx and im thinking about a good build I want to run about 300 -350 whp got any tips or ideas on a build and cost wise?
benaiah09 1 year ago
you need Greddy Type-S bov
JaviSR20DET 1 year ago
i was there in front of the car . lol i member that dyno day at rocks shop ! but umm "ka24desx" im about to pick up a DOHC from some guy here n greevnille, n imma get richard tha same place where the car sits now but imma get im to help me out with a few things wat should i do 1st ? to start my DOHC BOOST ?
mellymelsj30 2 years ago
whats the build on that motor to be able to pull that kind of power at 22lbs
I seen 500hp ka24de at 30lbs barely pulling those numbers
whats the secret
onlydrinkkoolaid 2 years ago
im running 21lbs on a garrett 60mm turbo , just got an AEM EMS. What fuel are you running? I am trying to find some 1300cc or bigger injectors so i can finish an E85 conversion, any idea were to find those message me please, any ways, any ideas on breaking the 400whp range on pump gas?
NemansMQ 2 years ago
@NemansMQ Ok Here is my Dyno Video for this build as a Vid Response.
PrentissRacing 2 years ago
I BROKE 400WHP!!! CHeck out my response video! (This is NemansMQ account too)
PrentissRacing 1 year ago
raced any supras?
Pe3NuT 2 years ago
of course! Gotten spanked and done some spankin as well.. Never know what those cars have until the race is over but not much will get in the way of a built supra on the hwy. nasty nasty cars.
ka24detsx 2 years ago 11
yo would u recommend an enthalpy tuned ecu at all?
GunmetalSR 2 years ago
The only ROM tune I like is JWT's program with the 72lb injectors. I don't care a whole lot for their 50lb or 96lb program but the 72lb is incredible. I personally know 5 KA-T guys all making over 500whp with that tune. Also got 30mpg on the hwy!
ka24detsx 2 years ago
@ka24detsx Im over 500 crank power in my kat and only using 24psi. but I only get 22mpg bc I'm using E85. What fuel are you using ?
PrentissRacing 2 years ago
@ka24detsx no kidding for that kinda power 30mpg? shit thats not bad thats like a beefy v6 gas mileage not bad at all
Z32spdstr 1 year ago
@ka24detsx with a built motor/?
peacebomber8 1 year ago
@GunmetalSR both enthalpy and jwt have great roms, i have an enthalpy so i like them better, no problems with the tune great plug and play ecu.
supraman121 7 months ago
I would recommend talking to Andy Vaughn at AutoVaughn Performance for a Nistune ECU. Nistune unlocks your factory ECU to function as a real time standalone computer. Look for new Dyno #'s from me in the next few weeks..
ka24detsx 2 years ago
@ka24detsx ecu increase power?
peacebomber8 1 year ago
very nice man, just curious as to what you're running for tuning?
curly2k32007 2 years ago
At the time it had a JWT ECU. With the new setup I'm switching to it'll be Nistune.
ka24detsx 2 years ago
ok so i did a 5 speed swap on my 95 s14 but kept the automatic ecu and im goin to install a t25 with stock sr injectors .. but im having some trouble finding an ecu already tuned for it. what do u recommend? or should i just get the 5 speed ecu n get a SAFC?
roy23pim 2 years ago
SAFC's suck. I got one for my ka24de and I dont like it hopefully i will ROM tune soon instead. Right now im running my stock maps with 370cc injectors on a t25. Its running rich but my engine wont blow up
nis915 2 years ago
@nis915
I was using one SAFC II on my last set up and I don't regret. The car was running great and it made 270whp @ 9 psi with 370cc injectors and it wasn't running rich.
TNismo 1 year ago
when are you seeing full boost? is this an extended top or NON extended tip turbo?
STiTypeUK 2 years ago
It's the Extended Tip S262 and it has 20lbs of boost @ 4200 and 28lbs @ 4600. I'm switching to an S364 or S366 in the next month so look for new numbers soon!
ka24detsx 2 years ago
selling the s362?
STiTypeUK 2 years ago
wat size pistons are you running? stock bore?
driftingflacotrd 3 years ago
Crower Rods, Wiseco Pistons. ARP headstuds,mainstuds and OEM Fel-pro Headgasket. Turbo is a Borg Warner S362 w/.70 a/r. It currently makes 530whp/455tq @ 25lbs.
ka24detsx 3 years ago
ever drag race this car yet?
IKE5327 2 years ago
Now those are numbers..
MAINTAININ227 3 years ago
what internal mods did u do? or is it all stock? and what turbine as well?
ynawboi 3 years ago
so sick
tremer88 3 years ago