250f* If below 250 lean it down if higher than 250 richen it up. It is not easy to get the best reading with the wire on the glow plug because that is where you want to point the temp probe. Point the touchless temp probe straight down onto the glow plug for the best reading. I use a glow plug tool to start mine so I don't have to have the wire in the way.
just remember to clean after dirty running..specialy air filter ..u should get airfilter oil and 7,2 volt battery pack ;) ive had mine for 1 year and no problems so i recomend it..it does 40 mph stock if tuned right
I put a trx 3.3 in mine and it's too much motor. Going to put the 3.3 in my t-maxx and put it's 2.5 in the sport. You could probably lean out the motor a little more.
Freakn Right!!!! Im a huge fan like u!!! I have lots and lots of stuff in my display plus lots of other stuff in my boxes. You should see it! Do you have some too...
i've always been told 160 degrees over the outside temp. if its 50 degrees out, just add 160. thats in farenheight (im not sure where youre at)
STINKYbongWATER4207 2 years ago
This has been flagged as spam show
watch my vid and tell me if it is good for a noob
nitrorcx1998 2 years ago
I have my temps between 210 and 230 that way you get the maximum life out of your engine
RickThePancho007 2 years ago
250f* If below 250 lean it down if higher than 250 richen it up. It is not easy to get the best reading with the wire on the glow plug because that is where you want to point the temp probe. Point the touchless temp probe straight down onto the glow plug for the best reading. I use a glow plug tool to start mine so I don't have to have the wire in the way.
crazy7997 2 years ago
running a little rich are we?
MoRRisoNRisiN 2 years ago
running a little stupid are we?
RoBtHeQuAdEr 2 years ago
yes we are
RcUniverseGuy 2 years ago
This comment has received too many negative votes show
your poor
majrascal863 3 years ago
im thinking of getting either a sport or a evader st which would u or anyone prefer??
i have a maxx 3.3 but have had to much problems with it!
koolkat2417 3 years ago
Im thinking of getting one of these for my first nitro truck.
how much is the truck and the tools needed (not including gas)?
hedintheclouds62 3 years ago
just remember to clean after dirty running..specialy air filter ..u should get airfilter oil and 7,2 volt battery pack ;) ive had mine for 1 year and no problems so i recomend it..it does 40 mph stock if tuned right
traxxasnitrosport94 3 years ago
mine was 400 and that was in like o3 so probably expensive
RoBtHeQuAdEr 3 years ago
u dont need tools unless u break sumthin i think mine cost 400 to 425$
RoBtHeQuAdEr 2 years ago
I love to Pass cars with my T-Maxx and my Nitro Sport!!!! :()
1993TMAXX 3 years ago
I put a trx 3.3 in mine and it's too much motor. Going to put the 3.3 in my t-maxx and put it's 2.5 in the sport. You could probably lean out the motor a little more.
TimmyTisme 3 years ago
Put a .18 in it. It would be MUCH!! better.
jeffgordonfanian 4 years ago
GO JEFF GO!!!!! I have a freaken huge collection of his stuff!
1993TMAXX 3 years ago
He's the best ain't he???
jeffgordonfanian 3 years ago
Freakn Right!!!! Im a huge fan like u!!! I have lots and lots of stuff in my display plus lots of other stuff in my boxes. You should see it! Do you have some too...
1993TMAXX 3 years ago
Ya I have some diecast cars, shirts, etc...
jeffgordonfanian 3 years ago
jeff is #1!!!!!
koolkat2417 3 years ago
no he's #24! lol i like dale jr.
wrnr8393 3 years ago
nice video it really cruses for a little pro .15! Mine has a Nosram RS.18 engine and there is a huge difference in power.
mathewec 4 years ago 2
would you plz be able to tell me what you did to get a rs.18 engine mounted step by step
i want to consider trying it
wattle17 3 years ago