hi guys ! i have a problem whit my kontrol x1! i have the kontrol + omni control from numark. and when i'm doing the midi mapping for the kontrol. the buttons and the knobs scramble/ mix whit the omni control's mapping. for ex when i turn a knob for the loops the pitch changes and onther things like that; any ideeas? thanks :d
i would pick which controller to keep its configuration and make changes to the midi mapping conflicts on the other. im no expert i just started learning midi mapping but i would give it try
@radu10121991 both units are on the same midi channel. you need to change the midi channel of the kontrol x1 (to anything other than 1, which is what the omni is probably on), by using the configuration application supplied with the x1 drivers.
I currently use 2xCDJ 400's + DJM 400 and my macbook pro, will i be able to use this to utilise traktor Pro's effects, and keep my CDJs as my MIDI controllers for selecting tracks etc?
amazing...one question... i will buy new equipment but i dont know how to connect all together...
if i buy Xone 92 than two Kontrol X1 ( probably this must be better than xone 1d?? ) and traktor pro than i must buy audio 8dj or i get this in traktor pro box??
so if i have all this that must run perfectly?
and i dont know exactly the difference between audio 8dj and 4dj...??
Xone92 plus the KontrolX1 can be used as stand-alone equipment, if your soundcards performance is good.The Audio4 has 4Mono-Outs, the Audio8 has 8Mono-Outs(or better, 4Stereo-Outs).I recommend( I already have it) the Audio8.
Hope I could help you, sorry for my bad English, regards from Germany
I have the X1700 mixer along with the Denon DN-S3700 turntables. LOOOOVVE that kit. IMO its one of the best mixers out on the market. Dual effects banks are awesome.
What's the pink piece of equipment next to the X1? Is that part of something else?
birthdaypig2000 4 months ago
@birthdaypig2000 I think that's part of the mixer :)
benedicttucker 3 months ago 4
yeah but im lookin on how to assign 3 (more than just 1) affects linked together on one deck..key word 'linked'
because im able to assign 3 affects to one deck but not linked, i cant figure it out
dvaifilmsdotcom 9 months ago
@dvaifilmsdotcom
Somewhere in setting go to effects and change advanced to chained
i think thats what your looking for
DJJayD33 6 months ago
thx man is great...hehehe
lowrider692 10 months ago
I'm buying one of these this weekend. Pumped!
GrantmotherTubes 1 year ago
what if i want to have x1 and maschine coonected at once? my comp has only one usb in
beatjugglez 1 year ago
@beatjugglez get a USB splitter
apwnr007 1 year ago
@beatjugglez usb hub?!
Maxzom 9 months ago
demo en francais svp merci.........
djtom83160 1 year ago
does it work with final scratch 2??
djfeel89 1 year ago
the track name is: gaiser - oolooloo
facu9002 1 year ago
turntables?
pkyomama02 1 year ago
@pkyomama02 those are technic 1200's using traktor timecode vynyls
TheXxRoSsXx 1 year ago
The name of the last song... pls :) !
DaddoJunkie 1 year ago
i did it ... the same night i posted the question on youtube :p thanks anyway .. me 2 i'm a bigginer :p
radu10121991 1 year ago
Hey what company produces that red center peice in the dj setup, if im not mistaken is that an external FX processor?
xxhackerxx100 1 year ago
@xxhackerxx100 It's a denon mixer with a fx unit in it
matthijsvangastel 1 year ago
@xxhackerxx100 it's a Denon DN-X 1700 Mixer.
DJNDM 1 year ago
hi guys ! i have a problem whit my kontrol x1! i have the kontrol + omni control from numark. and when i'm doing the midi mapping for the kontrol. the buttons and the knobs scramble/ mix whit the omni control's mapping. for ex when i turn a knob for the loops the pitch changes and onther things like that; any ideeas? thanks :d
radu10121991 2 years ago
i would pick which controller to keep its configuration and make changes to the midi mapping conflicts on the other. im no expert i just started learning midi mapping but i would give it try
youngn420 1 year ago
@radu10121991 both units are on the same midi channel. you need to change the midi channel of the kontrol x1 (to anything other than 1, which is what the omni is probably on), by using the configuration application supplied with the x1 drivers.
tehpsy 1 year ago
ola se eu kiser abrir e fechar canal dela nde k eu vou
GUSTAVOEVAN 1 year ago
@radu10121991 thats just the denon mixer...
tooflytocry 1 year ago
GAISER TRACK!!!
xsonic01 2 years ago 2
I currently use 2xCDJ 400's + DJM 400 and my macbook pro, will i be able to use this to utilise traktor Pro's effects, and keep my CDJs as my MIDI controllers for selecting tracks etc?
AppleOnCampusDCU 2 years ago
from Part 1/3, it is possible!
deepviolator 2 years ago
Yes! You just have to configure it properly...
xfp21 2 years ago
400's have USB
LucaRox19 2 years ago
but I can also use the other effects of traktor or just delay and reverb filter?
TheSimonec82 2 years ago
You can assign the buttons to control whatever effects you want.
Grimseyface 2 years ago
amazing...one question... i will buy new equipment but i dont know how to connect all together...
if i buy Xone 92 than two Kontrol X1 ( probably this must be better than xone 1d?? ) and traktor pro than i must buy audio 8dj or i get this in traktor pro box??
so if i have all this that must run perfectly?
and i dont know exactly the difference between audio 8dj and 4dj...??
if somebody know please answer...
tnxxxxxx
DZOMBAAA 2 years ago
Xone92 plus the KontrolX1 can be used as stand-alone equipment, if your soundcards performance is good.The Audio4 has 4Mono-Outs, the Audio8 has 8Mono-Outs(or better, 4Stereo-Outs).I recommend( I already have it) the Audio8.
Hope I could help you, sorry for my bad English, regards from Germany
BenitodelTerror 2 years ago
trackt is Gaiser - Oolooloo (Original Mix)
AndreDuha 2 years ago
track ID anyone? =D love that tune
Hiclyon 2 years ago
shitttttttttt makes it real hard to choose between a second Xone 1D or a Kontrol X1 now..
they look so SMOOTH.. SEXY.. and they're less expensive..
monyetbesar 2 years ago
Can't wait till Februari, want this controller !
D2V3 2 years ago 2
what mixer is he using?
tikubii 2 years ago
denon dnx 1700 =D
Hiclyon 2 years ago
I have the X1700 mixer along with the Denon DN-S3700 turntables. LOOOOVVE that kit. IMO its one of the best mixers out on the market. Dual effects banks are awesome.
shadow12one 2 years ago
=D yei they´re awsome but I think I´d rather using the xone 92 =D cheers
Hiclyon 2 years ago
ugh i need
pandaemon00 2 years ago
I'm the first viewer! :D
speedRickspeed 2 years ago