How are the cab sims with this tube power amp/guitar cab solution? I've heard they lack the prescence etc that the FRFR solution provides. This sounds great though.
This comment has received too many negative votesshow
any modelling unit will never get the dynamics and punch as a real tube amp. All modelling amps sound like they are recorded, ie: what you play sounds recorded. It is OK if you record, but live it is so lifeless and uninspiring.
jaeger28 I own a Mesa Boogie 50/50 power amp you think it would make sound as good with the Axe-FX preamp like your VHT or would make it sound fizzi? Please need some feedback to buy a preamp like this.. thanks
The 50/50 is a highly regarded poweramp, so I don't see any issues with using that instead of the VHT. It will sound slightly different, but not to an extend that it couldn't be adjusted with the parameters in the preamp.
men i have a question, when you use the vht power amp you need to use both chanels ?? because i hear that if you use only one you can damage the other.
As long as you leave it on standby its all fine.. but you should never turn on a tubeamp without having a load on it(Meaning a speaker or power-attenuator.).
Volume poti on the guitar and switching between pickups (the Les Paul has individual volumes for neck and bridge, so you can switch from full on bridge to a clean neck tone)
hello....do i need a power amp or is it possible to connect it directly into a cab?
jeffdisario 1 year ago
dude how much is the vht power amp???
ghost666HAZE 1 year ago
@ghost666HAZE
Depends on what kind of price you can find. Between 600€ and 1100€ depending on new/used and where you buy.
jaeger28 1 year ago
Everything is backwards......?
bmwm3cs 1 year ago
@bmwm3cs
jaeger28 1 year ago
This set up sounds very nice. what FRFR are you using now? any suggestion? thanks in advance
misawa520 1 year ago
@misawa520
I am back to amps. Now playing mainly a Bogner 100B and a Marshall 2554.
jaeger28 1 year ago
aint nothin like the real thing...
edmamg 1 year ago
The Nuge!! Love it man - Got a very simaler set up but the G-Major 2
DirtyNz1 1 year ago
did you get to test the 2902 power amp when you got your 2502?, just wondering if you have any thoughts on the difference tone wise?
I can't make my mind up!
watchtheskies 1 year ago
can't beat those rengoB cabs :)
watchtheskies 1 year ago 6
@watchtheskies
Well, my llahsraM 3791 eats it for breakfast :O)
jaeger28 1 year ago 2
How are the cab sims with this tube power amp/guitar cab solution? I've heard they lack the prescence etc that the FRFR solution provides. This sounds great though.
amarr1 1 year ago
is it better than a regular amp? (for live purposes ofc)
ekdavid 2 years ago
im buying an axefx soon, so sick dude...
i wanna get the engl e-530 and the vht power amp you have too
TruNikkaz 2 years ago
I think he's using the AxeFx as a preamp directly to the VHT poweramp.
waynegacy666 2 years ago
yea that's exactly what he's doing
i was planning on using the axefx as my effects processor and back-up rig
TruNikkaz 2 years ago
This comment has received too many negative votes show
any modelling unit will never get the dynamics and punch as a real tube amp. All modelling amps sound like they are recorded, ie: what you play sounds recorded. It is OK if you record, but live it is so lifeless and uninspiring.
knikk77 2 years ago
jaeger28 I own a Mesa Boogie 50/50 power amp you think it would make sound as good with the Axe-FX preamp like your VHT or would make it sound fizzi? Please need some feedback to buy a preamp like this.. thanks
mxr2000 2 years ago
The 50/50 is a highly regarded poweramp, so I don't see any issues with using that instead of the VHT. It will sound slightly different, but not to an extend that it couldn't be adjusted with the parameters in the preamp.
jaeger28 2 years ago
@mxr2000 vht power amps are nice but your mesa should be just fine i'd probably get an engl power amp
brandon5pennies 1 year ago
men i have a question, when you use the vht power amp you need to use both chanels ?? because i hear that if you use only one you can damage the other.
rockboy8812 2 years ago
I run one side only, leaving the other on standby. No issues whatsoever.
jaeger28 2 years ago
As long as you leave it on standby its all fine.. but you should never turn on a tubeamp without having a load on it(Meaning a speaker or power-attenuator.).
notuern 2 years ago
You had the carvin power amp and now the vht amp. What are some the differences between the two and what made you swith?
colbys1019 2 years ago
The VHT is tube, so it responds different, more warm, more elastic, if that makes any sense.
Meanwhile I use a fullrange FRFR monitor and am in fact very happy with that solution.
jaeger28 2 years ago
01:29 to 01:36= marty friedman licks!?!?
anahowana 3 years ago
ehm no :o)
Jimmy Page, Since I've been loving you - ish ..
jaeger28 2 years ago
how do you change from distortion to clean?
dayton4957 3 years ago
Volume poti on the guitar and switching between pickups (the Les Paul has individual volumes for neck and bridge, so you can switch from full on bridge to a clean neck tone)
jaeger28 3 years ago
Sounds great! I hope to hear more from ya.
xVSxNightamre 3 years ago
awsome5*
hiro8002096 3 years ago
\o/ sweeeeet
LewRKop 3 years ago
i dont get the point of a vid if its not going to show anything that moves.. like the playing.
DMal 3 years ago
the level on the axefx and shadows are moving!! :-p
LewRKop 3 years ago
yeah well ... I didn't shave today, y'know :o)
But you do see my shadow playing, and you can watch the gear ..
jaeger28 3 years ago
Very nice!!!
A bit too much room ambience (together with the delay from the guitar tone). What is a rengoB cab?
:-P
jimmypagefan33 3 years ago
Sounds great! Do you have the cab sims on or off?
harold282 3 years ago
Off, as it is running through a guitar cab.
Power amp sim is on, but "Thump" is off
jaeger28 3 years ago