CRX SI D16Z5

[kamikazicrxsi]

the one who vote that he dont like my vid or my car i would like to tell me the reason that forced him to do this action.thank you.

[Brendon00000]

nice start to the crx make a walkaround video but please get those stock tailights and corner signals back on, these are ricey, and try some JDM rims, I understand we crx owners dont have all the money we need, my parts list has about 40 part kits on it adding up to $15,000 but that makes a jdm showcar out of it, with a k20a which I will eventually get, but I will make a picture slideshow soon, I drove mine for the first time in deep snow yesterday, sliding all over Lol lots of fun

[kamikazicrxsi]

@Brendon00000 hi.i respect your opinion about the tail lights but i were fit them on when a drunked teen had crushed on my rear bumper real hard.that time there was no jdm tail lights anywhere exept those.about the rims i have to tell you that the brand is advanti racing which is brother company with advan racing!!they are ultralight!for jdm style i like integra but even the96 spec(which they have4 bolts)they dont fit with my axle specs.if you made true the k20project that  will be just great!

[xboxalpha]

WAAAAAAAAAAAAAAAAAAATATATATATA­TATA 

[Cliostreekiller]

toyo r888......

[kamikazicrxsi]

@Cliostreekiller  this tire is blessed by god!!i have a pare on my front axle and they have changed the car behaviour in corners dramaticaly.if you dont have one i suggest you to get,you will love them!!

[kamikazicrxsi]

 I ♥ japan

[sonosuke123]

nice car

[metallicaguzman]

@kamikazicrxsi yeah i know funds make it all possible. bad thing is my crx is a base model so its not stick yet where would u recomend i start with it???

[metallicaguzman]

nice rex man i love it

im workin on my '90 crx

plan on dropping a b16 type r for engine

but funds are low XD

[kamikazicrxsi]

@metallicaguzman thank you for your good words.i am trying to have it as good is possible.im done with the engine and am planing to refresh the color to a brighter white.yea money are the final frontier to our tunning opetites,be patient XD!

[metallicaguzman]

@kamikazicrxsi yeah i know funds make it all possible. bad thing is my crx is a base model so its not stick yet where would u recomend i start with it???

[hondacivicpower100]

@metallicaguzman hey man, i recommend not to buy a b16A1, they mostly have the VTEC crack, they make a lot of noise in the high revs, a B16B runs much smoother, the B16A2 runs better then a A1, a B18 is even better but you will need the money for that. Good luck with your project :P

[metallicaguzman]

@hondacivicpower100 thanks man good info :D as of right now i got a hold of a d15b for dirt cheap ima rebuild it then save for a b18 so well see how it goes :)

[kamikazicrxsi]

@SHANGRALAAAA17 these rods are made especialy for this block so they didint need any extra work to fit on!

[kamikazicrxsi]

SHANGRALAAAA17

i didnt see the block notched to fit those new rods.

[macius125]

Nice!!!!!!!

[kamikazicrxsi]

these words on the number plates are egsisting only for the honda haters!so theres nothing to worry about.thanks anyway...

[Mazis22]

@kamikazicrxsi

Ok i see.

Well i have now 3rd honda with d16z6 I didn't have any other car exept HONDA :D

PEACE dude ;-)

[kamikazicrxsi]

you must really love this chassi to have it three times!this is my first honda and in the future i would like to go b series and buy an integra type-r : ) !!by the way exept the head(sohc) your engine bottom is similar like mine's as the power our engines produce.i ve done a lot of work in the engine and i left for last the paintwork.this summer im going to refresh color but in stock combinations!as a true honda fan neither i want to have an other car except a HONDA!!HONDA--JDM 4 LIFE!!peace

[Mazis22]

@kamikazicrxsi

Yes. both engines are the same lets say...

And i really like honda's and the mst of it... ENGINES. high power on small engine and incredible high factory rpm's :) I have restored all the body and rebuit the engine. everything is stock. Well it's enough to drive and have fun with it, but i have a dream ... to have B series VTEC engine in a car... :) ... HONDA... POWER OF DREAMS ;)

[kamikazicrxsi]

honda has an enormous choice of engines to choose.you have the ability to put ab16b(civic type r), b18c(integra type r)but if your hp goal is higher a k20a(civic type r) or an H22(preliude type s)!all of these are aprox185- 200-220 hp and allways naturaly aspired!!honda the stronger and nore tunable n/a engines ever!!

[Mazis22]

vudeo would be nice if it wanst that F***Y*** lisence plates.

So get rid of that and good luck with Your CRX

PEACE

[Mazis22]

Nice video, but lisence plates... grow up man :)

That's an advice

Everything would be nice if it wasn'r that F*** Y** reg numbe.

peace and good luck with Your car

[fistikis100]

8ελει πλυσιμοοοοοοοοοοοοοο

[kamikazicrxsi]

nai re mlk to vlepw kai to lypamai!gamimenh lasph!aaa....kai kati teleutaio fae re file kai kanena fistiki........

[fistikis100]

vafto blue marine kai sprwxto sto aperado gallazio..

[kamikazicrxsi]

SKUNK 2 KAI TA MYALA STA MIXER!!

[cela4308]

very nice !!! But what happen no block guard .ihave a almost the same situp mine is zc dohc with eagle rods &wiseco pistons .40 overbore  but stock cams crespo cams coming soon

[kamikazicrxsi]

it didnt need to have one.we wearing the same rods but my pistons are jp.with forced pistons you can make high compression and reliable.when you make your new situp send me how mutch power it pulls!

[iczerone2000]

nice ride!!

[danijelmarkovic11]

nice vid and nice car :)

[te37drift]

very nice build. what rods and pistons did you use?

[kamikazicrxsi]

the rods are eagle(heavy duty) and the pistons are jp(similar with stock).

[cesaria]

very nice...... were did you buy the part on the minute 1:34?????

[kamikazicrxsi]

thats the engine block,can you be more specific?thaks