wouldnt this gun be good enough if you had a professional work on it making it good? i mean its CA you really can't go wrong cause they are all decent and durable
the RS dragunov has a problem where it will jam a lot, and I have only seen it fixed by taking the box out and holding the pin back to full auto and firing it, it will then work again, but still return to the jam (yea a lot of semiautos jam, but its usually the way the gears spin on those, on this its a little lever that changes from semi to full that will jam halfway)
ummm buddy i own this gun to and the forgrip is to small for a lipoly battery if tried to fit a socom gear 11.4 volt stick and it wouldnt fit so hmmmm
thats not even a lipo hes using so look whos stupid its an 8.4 volt 1400 mah ak stick type so learn your facts you probably cant even shim your own gun or know how to decompress the gearbox while taking it apart
I didn't say "read the manual it says to use a lipo". Airsoft gun manuals are a waste. According to you, I should still be running my CA on an 8.4v block battery, and it should have an SP90 in it.
See why you don't read directions on airsoft guns?
Modding guns is half the fun. If people didn't have the balls to make 500 fps builds or install strafer kits, airsoft wouldn't be the sport and the hobby that it is today.
It's idiots like you that are confining airsoft to a little box.
@Kavurcen "they don't have the balls" ?? :D ...do you think airsoft is about spraying plastic into the woods (with 500fps)? Hmm, we play airsoft our way, you play it your way. (but SP90 is to low power, agree)
To be honest, I value my investments, and don't have the balls that some other people have, so no, I don't bring my guns up to 500 fps. IMO, that's just dangerous. But it's people that are pushing the mechanical limits of airsoft (not necessarily to play with, but just as a learning experience), which are helping our sport to grow and to advance.
This comment has received too many negative votesshow
you fucking idiot its not made to run off a lipoly im making a review now u guys are idiots it says 8.4 mini ak type battery right on the box so suck my dick
This comment has received too many negative votesshow
yeah i bought this gun it was my first classic army il never buy a product of theres again i had to cram my 8.4 volt 1400 mah stick battery into it and it still barely fit
Dude. It's meant to run on a Lipo. You shouldn't be buying any guns from any manufacturer because you obivously don't have the common sense to operate them.
What? You broke your crosman on a 11.1v? I'm so sorry for you, mate... Must be disappointing showing up at your friends garden on your cul-de-sac without a gun.
Now, as for the rest of your post...
Since I couldn't understand it, I'm going to have to interpret it as a homosexual advance. Unfortunately, muffin, I don't do guys... Maybe try Specldorf.
Small battery space in a gun = LiPo.
And for you nubs...
"LiPo Ready" is Evike BS.
You can run any gun on a lipo. It just might not last.
yeah i have bought the classic army svd and i get mine next wednesday and was wondering is the new hop-up really that great and revolutionary i hear this is a big deal for classic army
sometime that happen when the battery is getting low, and CA Motors usually drain batteries quickly. If you are using a 8.4v battery try a fully charged 9.6v / 10.8v battery to unlock the gearbox. If that don't work you may have stripped the piston or gear.
noooooo svd is nothing like an ak-47 its just looks similiar internals are way different on svds using a rotaing bolt system unlike an ak the svd was truly revolutionary mags are nothing alike
Hey Guys, just an update on this great SVD from CA, it will be in stock at hotspotairsoftdotcom on Aug-03,...and as CA said...Quantities are extremely limited, so if you want one act fast!
Thanks for your input assassinofhiddenmist, I though it was already very clear, but I understand for some people maybe still a little confusing so I will make that "Correction". On the other hand, the fact that is made overseas and you can buy it there doesn't mean is available everywhere and doesn't change the fact that in USA in not been released yet. US always get's stuff after ASIA and for good reasons, but the most important is "Quality Control". trust me you better off... waiting!
The Retailer you are referring to is located oversea, not in USA. if you read the description on the upper right corner and lessen the video you can clearly understand that we clearly refer to "USA" market in which this gun has NOT been released or available yet.
Considering the gun is manufactured overseas and the company is overseas, not to mention those who are really interested in buying one don't really care if its in the US or not, if the gun is released they will buy it, instead of waiting.
When you have "not yet released" in the title it creates confusion. I would change it "not yet released in the US", otherwise you will eventually get more comments like this.
this is sick! really impressed about the build quality...but as we all know CA dosen't skimp on anything....5 stars! hope to see you guyz soon to get some new stuff!
which one is better,RS or CA SVD?
raxaxaganaz 3 months ago
No matter how good the gun if you have a craptacular team...YOU WILL LOSE
xxReaverXXCerberusxx 6 months ago
what metallica song is this?
keyblade09 1 year ago
So is it at all possible for you guys 2 compare the Realsword version and the CA version like fps and accuracy comparisons
xxg00glexx 1 year ago
music is too loud
itention 1 year ago
how did u get the barrel unscrewed mine is almost impossible to unscrew.
dognatan 1 year ago 3
@dognatan Same. They used aircraft loctite. You need a heatgun supposedly.
Exarach 1 year ago
@dognatan Look for screws keeping it in place. Different releases of some guns have different screw placements. It's the same with the A&K SVD.
Snake4015555 11 months ago
what crappy music, ruins the whole video.
davkenrem 1 year ago
wouldnt this gun be good enough if you had a professional work on it making it good? i mean its CA you really can't go wrong cause they are all decent and durable
guitartate92 2 years ago
I would rather buy the RS.
Cougar545x39 2 years ago 7
the RS dragunov has a problem where it will jam a lot, and I have only seen it fixed by taking the box out and holding the pin back to full auto and firing it, it will then work again, but still return to the jam (yea a lot of semiautos jam, but its usually the way the gears spin on those, on this its a little lever that changes from semi to full that will jam halfway)
rusher38 2 years ago
When you cant get the RS or dont have the money, you get the CA which is the best alternative.
picure 2 years ago
ummm buddy i own this gun to and the forgrip is to small for a lipoly battery if tried to fit a socom gear 11.4 volt stick and it wouldnt fit so hmmmm
SNIPERRussian 2 years ago
thats not even a lipo hes using so look whos stupid its an 8.4 volt 1400 mah ak stick type so learn your facts you probably cant even shim your own gun or know how to decompress the gearbox while taking it apart
SNIPERRussian 2 years ago
I didn't say "read the manual it says to use a lipo". Airsoft gun manuals are a waste. According to you, I should still be running my CA on an 8.4v block battery, and it should have an SP90 in it.
See why you don't read directions on airsoft guns?
Modding guns is half the fun. If people didn't have the balls to make 500 fps builds or install strafer kits, airsoft wouldn't be the sport and the hobby that it is today.
It's idiots like you that are confining airsoft to a little box.
Kavurcen 2 years ago
@Kavurcen "they don't have the balls" ?? :D ...do you think airsoft is about spraying plastic into the woods (with 500fps)? Hmm, we play airsoft our way, you play it your way. (but SP90 is to low power, agree)
Cougar545x39 2 years ago
@Cougar545x39
To be honest, I value my investments, and don't have the balls that some other people have, so no, I don't bring my guns up to 500 fps. IMO, that's just dangerous. But it's people that are pushing the mechanical limits of airsoft (not necessarily to play with, but just as a learning experience), which are helping our sport to grow and to advance.
Kavurcen 1 year ago
@Kavurcen agreed
dingbat667 2 years ago
This comment has received too many negative votes show
you fucking idiot its not made to run off a lipoly im making a review now u guys are idiots it says 8.4 mini ak type battery right on the box so suck my dick
SNIPERRussian 2 years ago
This comment has received too many negative votes show
yeah i bought this gun it was my first classic army il never buy a product of theres again i had to cram my 8.4 volt 1400 mah stick battery into it and it still barely fit
SNIPERRussian 2 years ago
Dude. It's meant to run on a Lipo. You shouldn't be buying any guns from any manufacturer because you obivously don't have the common sense to operate them.
Kavurcen 2 years ago
ok u out a lipo in this gun and im just gonna laugh when u say....my gun broke cuz i was a fucking idiot
angrymuffin123 2 years ago
What? You broke your crosman on a 11.1v? I'm so sorry for you, mate... Must be disappointing showing up at your friends garden on your cul-de-sac without a gun.
Now, as for the rest of your post...
Since I couldn't understand it, I'm going to have to interpret it as a homosexual advance. Unfortunately, muffin, I don't do guys... Maybe try Specldorf.
Small battery space in a gun = LiPo.
And for you nubs...
"LiPo Ready" is Evike BS.
You can run any gun on a lipo. It just might not last.
Kavurcen 2 years ago
fornitures? lol i fornicated on my fornitures
lufah234 2 years ago
whats sad is i pre-ordered the socom gear barrett accidentally cancelled the order and regreted it and now im recieving a classic army svd cant wait
SNIPERRussian 2 years ago
THAT GUN IS FRICKEN INDESTRUCTABLE!!!!!!
full metal inside and out and
FIBER GLASS FURNITURE!!!!!!!!!!
A1RS0F7 2 years ago
yeah i have bought the classic army svd and i get mine next wednesday and was wondering is the new hop-up really that great and revolutionary i hear this is a big deal for classic army
SNIPERRussian 2 years ago
lucky u i have to upgrade the CRAP out of a JG svd to make it look more dragunov........ish
ur lucky ur not on a budget. =P
A1RS0F7 2 years ago
Or you could upgrade it to look like a Vintorez.... Or svd-s.
DanXDM 2 years ago
Does it come stock with a tight bore? do you know?
PV48Z 2 years ago
No, standard inner barrel.
HSAirsoft 2 years ago
what store was this in: ct or ny
espnfreak1997 1 year ago
out of all the airosft stores.. it happens to be you! !!!! yay
see46 2 years ago
So,.. what exactly is so strange about it?
HSAirsoft 2 years ago
they do all the reviews
see46 2 years ago
haha asgi just got it so ur not the only 1 muahaha!
A1RS0F7 2 years ago
That's right...many retailers.... "Just Got It".
you may want to take a look at the video DATE?
HSAirsoft 2 years ago
so if this fits an 8.4V stick, it would definitly fit a 11.1v 1200mah stick lipo. Am i correct?
shuuushii 2 years ago
Has anyone complained about the gear box locking up because it happened too mine.
12gaYote 2 years ago
No, no complains so far.
sometime that happen when the battery is getting low, and CA Motors usually drain batteries quickly. If you are using a 8.4v battery try a fully charged 9.6v / 10.8v battery to unlock the gearbox. If that don't work you may have stripped the piston or gear.
Thanks
Claudio
HSA Team.
HSAirsoft 2 years ago
ehh, i rather get the real sword SVD looks much nicer
metalchocobo410 2 years ago
you know if the SVD-S is being released anytime soon?
Schultz98 2 years ago
Agreed
Minion3425 2 years ago
is there gunna be a wood variant?
Tripod160 2 years ago
How much will the magazines run?
doubleray18 2 years ago
they will probly take ak mags
see46 2 years ago
noooooo svd is nothing like an ak-47 its just looks similiar internals are way different on svds using a rotaing bolt system unlike an ak the svd was truly revolutionary mags are nothing alike
SNIPERRussian 2 years ago
Hey Guys, just an update on this great SVD from CA, it will be in stock at hotspotairsoftdotcom on Aug-03,...and as CA said...Quantities are extremely limited, so if you want one act fast!
Thanks
HSA Team
HSAirsoft 2 years ago
Thanks for your input assassinofhiddenmist, I though it was already very clear, but I understand for some people maybe still a little confusing so I will make that "Correction". On the other hand, the fact that is made overseas and you can buy it there doesn't mean is available everywhere and doesn't change the fact that in USA in not been released yet. US always get's stuff after ASIA and for good reasons, but the most important is "Quality Control". trust me you better off... waiting!
HSAirsoft 2 years ago
This gun is already out, and has been for weeks. gunner airsoft has them back in stock now.
assassinofhiddenmist 2 years ago
The Retailer you are referring to is located oversea, not in USA. if you read the description on the upper right corner and lessen the video you can clearly understand that we clearly refer to "USA" market in which this gun has NOT been released or available yet.
HSAirsoft 2 years ago
Considering the gun is manufactured overseas and the company is overseas, not to mention those who are really interested in buying one don't really care if its in the US or not, if the gun is released they will buy it, instead of waiting.
When you have "not yet released" in the title it creates confusion. I would change it "not yet released in the US", otherwise you will eventually get more comments like this.
assassinofhiddenmist 2 years ago
sweet. hopefully they'll make a wood version if that's not too expensive.
xXgoROTinAsack89Xx 2 years ago
I hope the wireing isn't crap like on all the other ca's.
SargentShooter 2 years ago
this is sick! really impressed about the build quality...but as we all know CA dosen't skimp on anything....5 stars! hope to see you guyz soon to get some new stuff!
URM0MW4NT5MYJUNK 2 years ago
they dont skimp on their externals, just on the internals
eleeschalow 2 years ago
well kinda but they are easy to upgrade so thts np
URM0MW4NT5MYJUNK 2 years ago
nice store ! and gun !
xplodingbunnys 2 years ago