Our Ultimate Kit will fix your issue,We have customers emailing us with track records of 10 months,The Xbox 360 still running strong.The reflow works but you have to have a good shim kit to keep it pushed down when it gets really hot.
ok so, after i clean the gpu off, and put it on it should work? or like i neeed to overheat the xbox? also i do not have xclamps on my cpu is that a problem?
I just purchased this kit and it cured the E-74. It was a very easy fix to do and the seller was very helpful communicating via email when I had questions.
hey i have the e74 1022 and i did the xclamp fix about 8 months ago about 2 weeks ago my xbox e74'ed again and now it does it every 2-3 days will this fix it? or do you think i need to get my board reflowed?
Hello all, I just wanted to tell everyone in doubt, That I have bought a second kit from these guys, 1 for E74 and 1 for rrod, the E74 has been running strong for 2 months now. Ask about the "addition" for this kit. I will NEVER use "screws and washers" again. This kit needs to be sold at Gamestop. I hope you get your patent soon
To add my xbox did have previously rrod but fixed via xclamp now its e74 rather annoying and wont go away. I wish in the 1st place Microsoft addressed this situation of their heat sink and better developed it on launch rather than just sent out a system that was going to break.
wow really. oh hell yea. im gonna get this when i get my check. now i dont hav to keep taking my 360 apart and fix it all the time, bcuz i was just thinking about buying a fan. oh and 1 more thing. do u also get the liquid with the part 2 put on the cpu?
it prevent that part of that mother board or under the gpu form warping under loads of heat. this kit works, i fix my xbox with it and i have purchase this from ebay a number of times. i highly recomend this.
I would clean every bit off if you can,Because that past sitting on the small chips can cause heat build up.Take a tooth pick and magnifying glass and scrape that off around the small chips,Then take you some goo gone or paint thinner,and clean it off.Make sure to clean the heat sink good too.Then apply the plate and heat sink.
Im fixing a friends xbox360 arcade model. I can tell they did the "towel trick" b/c the CPU & GPU's previous thermal past were pancaked off the chips. Now some of that previous thermal past connected with the smaller chips. Will this effect my repair of the E 74 error code?
how did you clean it off the cpu and Gpu? i bought a RROD console to fix but it is hard to get the thermal paste off using alcohol they did the towel trick too.
i had the e74 and i did xclamp, than later on is failed, i than got it reflowed, 6month later here i am with it again, will it fix it?
is this a permanent fix?
rafi458 2 years ago
Our Ultimate Kit will fix your issue,We have customers emailing us with track records of 10 months,The Xbox 360 still running strong.The reflow works but you have to have a good shim kit to keep it pushed down when it gets really hot.
Or your back to the red light again.
lespaulman67 2 years ago
ok so, after i clean the gpu off, and put it on it should work? or like i neeed to overheat the xbox? also i do not have xclamps on my cpu is that a problem?
rafi458 2 years ago
i saw this on ebay!! may get one..
mwfail 2 years ago
I just purchased this kit and it cured the E-74. It was a very easy fix to do and the seller was very helpful communicating via email when I had questions.
blitzix 2 years ago
hey i have the e74 1022 and i did the xclamp fix about 8 months ago about 2 weeks ago my xbox e74'ed again and now it does it every 2-3 days will this fix it? or do you think i need to get my board reflowed?
kickop123 2 years ago
This fix works great and will fix it.
lespaulman67 2 years ago
Great Product. Easy Fix.
BloodyHands00 2 years ago
does this kit come with nylon washers or just that replacement of the xclamp and screws?
Didjumom 2 years ago 2
Hello all, I just wanted to tell everyone in doubt, That I have bought a second kit from these guys, 1 for E74 and 1 for rrod, the E74 has been running strong for 2 months now. Ask about the "addition" for this kit. I will NEVER use "screws and washers" again. This kit needs to be sold at Gamestop. I hope you get your patent soon
mustangs2002a 2 years ago 2
To add my xbox did have previously rrod but fixed via xclamp now its e74 rather annoying and wont go away. I wish in the 1st place Microsoft addressed this situation of their heat sink and better developed it on launch rather than just sent out a system that was going to break.
esko23q 2 years ago 2
our kit will fix that for sure.
lespaulman67 2 years ago
I need that kit u guys do shipping?
esko23q 2 years ago 2
We will ship outside the USA if you pay the shipping with insurance.Thanks
lespaulman67 2 years ago
I have a question, would this fix 1 red ring in the Q4 of the xbox. And fix the e74 error with the hidden error 1022.
Go0dInk 2 years ago
Hello Go0dInk
Yes this is the easy fix with our kit.1022 is the most common error.Works great with it and will last along time.
lespaulman67 2 years ago
An amazing idea thats so simple to apply and it WORKS! You deserve a pat on the back.Thank you so much for making it available to the public!
mustangs2002a 2 years ago
i have a question. im kinda new at this stuff and i like fixing things on my own. what exactly does this kit prevent.
LPATRON19 2 years ago
Hello LPATRON19
This kit is too fix the RROD and E74 it also keeps the motherboard from warping under the GPU.
That is one of the reason that causes all these problems.
lespaulman67 2 years ago
wow really. oh hell yea. im gonna get this when i get my check. now i dont hav to keep taking my 360 apart and fix it all the time, bcuz i was just thinking about buying a fan. oh and 1 more thing. do u also get the liquid with the part 2 put on the cpu?
LPATRON19 2 years ago
it prevent that part of that mother board or under the gpu form warping under loads of heat. this kit works, i fix my xbox with it and i have purchase this from ebay a number of times. i highly recomend this.
teamkvs 2 years ago
This product is GREAT!
Thank you very much for your easy to do
E74 fix.
We have tried the HYBRIDS Xclamp fix, and the Xclamps are complicated and do not even work well.
Yours took less than 30 minutes to put on and works great now.
Thanks again for this product!
koolkatkittyman 2 years ago 3
Awesome! Also you dont need washers with this install? Thanks again!
WendzDarKnight08 2 years ago 4
WendzDarKnight08
I would clean every bit off if you can,Because that past sitting on the small chips can cause heat build up.Take a tooth pick and magnifying glass and scrape that off around the small chips,Then take you some goo gone or paint thinner,and clean it off.Make sure to clean the heat sink good too.Then apply the plate and heat sink.
lespaulman67 2 years ago
Im fixing a friends xbox360 arcade model. I can tell they did the "towel trick" b/c the CPU & GPU's previous thermal past were pancaked off the chips. Now some of that previous thermal past connected with the smaller chips. Will this effect my repair of the E 74 error code?
WendzDarKnight08 2 years ago 4
how did you clean it off the cpu and Gpu? i bought a RROD console to fix but it is hard to get the thermal paste off using alcohol they did the towel trick too.
fenix0green 2 years ago
fenix0green we use paint thinner works great.
lespaulman67 2 years ago
k thanks i was just wondering since paint thinner well eat through paint so on CPU and gpu i don't know how it will react
fenix0green 2 years ago
we been using it for over a year and never had problems.We clean the die with 99% alcohole afterwards.Just use a cuetip and rub it off.
lespaulman67 2 years ago
Works Great I Bought One And I Havent Had Thr e74 error at all
DeeAkADBOi 2 years ago 4