Extremely Detailed 4ch 2.4ghz F4U Corsair 800mm Warbird

[dudeguy2157]

SUPER

[Gazzz87]

you mumble terribly. SLOW DOWN.

[RCbuilder888]

i want to upgrade the battery in my corsair that im getting. (yellow one) will i have to change the plugs in the plane if i want to get a bigger battery?

[MilesDatdude]

DOes the stock battery come with jst plugs?

[chicaviszla]

Would this be a good first 4ch plane?

[javamochacocoa]

@chicaviszla Hey I bought this as a first (first rc airplane). I have had a little experience on the cheap fms simulator but after I got this things correct cg it flew really well. No bad characteristics either. Oh CG is approximately 30mm from leading edge. (25%)

[darren1492002]

guys if u need a prop fix heres how u do it take a 8x6 gws prop slow flyer and put that on and take 3 small washers and put them on after the prop take the regular nose cone and tighten it down it works perfect dont wait around on nitro planes to get parts go have fun with ur plane cuase we all know that they dont like to keep anything in stock or try to do anything about it

[fukyourmom]

it says the approximite flying time is 8 minutes.....is this true...if so what would be a good replacement battery....

[ketiakoren]

I got one, like it a lot but the paintings keep coming out like it wasnt dried properly

[il2sturmovikfb]

planning to get one

[HungerGamesFan101]

Hey, Looking for a few extra props, mine broke on the first flight, pilot error. hehe

Any info you guys can give me would be great! thanks

[TRAPBOULTERNAS]

i just got this plane!!! it was my first order from nitro planes, so i hope everything works out!!! i have been surfing this site since i got into rc, and even tho i have only bought one plane, it has helped me alot just reading about the planes/helicopters. if this purchase works out, i will definitly be back for more planes!!!!

[1PrankWars]

i dont like this plane. i have a f4u corsair arttech and every time i plug in the battire and turn on the radio it does these twitching movments on its own and its really hard to fly with it and it making its own decesions. do you think you could HELP because i would really like to fly it. i only flew it 2 times.

[eaglespetty]

Would be nice if you guys stocked the replacement parts for these. 4-6 weeks for a new prop is bullshit.

[mrt9001]

anyone else have a problem with trying to find replacement props? theyre always sold out on the website

[HungerGamesFan101]

@mrt9001 yeah i need some to, i broke mine on the first flight...pilot error.

[25852Dan]

Looks like you were fighting with the wind.

[mcgrimes]

could it lift a go pro camera?

[TheHelper661]

how do you become a flyer for nitroplanes can you pm me if you can please? and if you do become a flyer do they send you planes

[cunningham91]

where can i get replacement parts?

[3255959]

When are you guys going to get more of these corsairs? I want one for sure..

[bkedp]

Sorry if this is a dumb question, I know nothing about RC Aircraft, but is the entire fuselage and wings made of Styrofoam? Is something like this style of airplane good for beginners? Thanks

[papergunmaster123654]

@bkedp No, even though most planes are made onlycwith "styrofoam". Start with a 3-4 channel trainer such as a piper cub or cesna 172.

[WaiSideOriginal]

Jet Li looks young in this video

[enjidiogo]

Hello my name is Diogo live in Lisbon Portugal

I've been on your web site I wanted the model F4U Corsair here in Portugal but do not know if there if I order online how does he come from?

[Emandudeguyperson]

Corsair? 2.4ghz? Is it a computer?

[covercalls88]

Balance the CG and make the control movements to the Corsair according to what Tony's suggestions in the video !! I was there during the maiden flight and Tony had the CG according to the original plans and it was a handful. At first I though Tony was just testing how strong the plane was, his first loop he cleared the ground by about 3 feet. He really showed his skill in getting it down in one piece. Once he rebalanced the Corsair, it really flew nice from that point on.

[nitroplanes]

@CarlosMerighe Thank you for the comment, CarlosMerighe! Your spare part will arrive in no time, we apologize for the inconvenience =)

[nitroplanes]

@CarlosMerighe Thanks for the continuous support, always, CarlosMerighe! Great choice =) and for any questions you may come across, you are more than welcomed to check out our forum at RCDiscuss. com where many of our customers and hobbyists share their advice, thoughts and experience on the hobby! Have a great one, CarolsMerighe!

[CarlosMerighe]

@nitroplanes, the replacement wing arrived. Thanks!!!!

[startazz]

The F4U Corsair is one of my all time favourite warbirds and when i do order from you boys this will be the bird for me ;-) one thing though does enough air flow get to the battery and ESC?? i'm sure it would but would like to know before i go for it and thumbs up as always ;-)

[Reviewsofthedude]

DO NOT FLY OVER RIFLE RANGE kinda good advice!

[shartne]

sweet plane

[LeChave]

love the assault rifle fire from the gun range lol! Nice RTF birds though.. if I ever get one (or similar) it'll be through nitro planes.. as i purchased a EXI 450 heli & motor + servos through their sister site, XHeli.. and even with shipping to the UK it was cheaper than I could get here!!

keep up the good vids guys!

[evanator211]

what planes would you reccomend for 11 year olds with no price range but they dont want a flimsy plane that brakes easily??

[Prttimeninja2]

@evanator211 If hes 11, I would get the Apprentice, It is Powered by a 15 size outrunner brushless motor, has a large wing span of 58 inches, made out of EPO Foam, which makes it Minor Crash friendly, and they fly great. I teach people to fly all the time, I can't think of anything better. It comes Ready to fly with a DX5 Transmitter 2.4GHz and a Li-Po battery. If I were you, I would look into it, Also get a better charger and at least 2 extra batterys.

[covercalls88]

@evanator211

If the 11 year old is a novice, I would suggest a Hawk Sky from nitroplanes, or something similar to it. Because it is a of pusher design it can take a bit more punishment.

[pacrat90]

Wow, That flies to fast for me.

[krtex56]

Those holes on the frount of the wings are vents. Not guns.

[0MoTheG]

even with the extra weight the flight looked light.

[lewandlo]

I too had great experiences with NitroPlanes. Had all my orders shipped very fast and no problems. I`m sure I`ll be back . If you order a plane ,make sure you go over all the plane and reinforce if there is a weak spot in the design. If you like a plane make sure you check out all the reviews and the videos on Youtube. It helps to make up your mind when buying a plane you like. hey Thanks NITROPLANES for all the great selection of Rc gear....Lew

[anderman72]

Beautiful plane and a great landing Tony! You handle the wind very well! I love your products Nitroplanes!

[pem1968]

Thx for the vids! I'm wanting to get into RC planes and would love to fly this F4...is it easy to fly for a beginner?

[covercalls88]

@pem1968

In one word NO !! Not recommended for beginners. Try the Hawk Sky, it is one of Nitroplanes best trainers.

[pem1968]

@covercalls88 Thanks, will check it out.

[rowdyrodcumming]

Very nice... I love the Corsair... one of may faves.... great work on the the FunFly... wish I could have been there, looked like a lot of fun!!

[ArcticRc]

Scale warbirds are just lovely. And you can make such great videos of them. The fly beautiful.. Bigger is better but i really want one of these. Hey Tony did you see the BEAST from hangar 9 when you where at the rc show.. Damn what a plane that is..

Keep on feeding us with great videos..

Greetings from Norway. Bengt

[dingo7222]

Very nice review, I might get one sooner or later.........sooner rather than later

[Trueflights]

is it tail heavy or is the elevator just a bit touchy? It looks very twitchy. Nice detail on the plane though.

[10fantic]

looks tailheavy!!!!

[scooterking85]

Looks a bit tail heavy ; )

[rezerk66]

Nice sunglass ! :)

[lejink]

just thought id do a little customer testimony, i got a couple helis from nitroplanes over the past year.. great service, also ordered a part but canceled the order with no problems.. helis came well packaged , was just a really smooth experience dealing with this site.. im still kind of new to shopping online so im not very trusting of most sites, this was before i found this youtube page too.. but ill definitely be back to this site for my next rc project.

so a big thank you, cheers

[nitroplanes]

@lejink Thank you so much for all the support, Lejink! Our representatives would be glad to help you with any inquiries you might have at any time. Helping our customers feel at ease in ordering with us online is our top 1 priority. For any questions you might have with the hobby, please feel free to visit our forum at RCDiscuss . com where many of our customers and hobbyists share their thoughts and experience with our products. Hope the information helped! Have a great one, Lejink.

[flyingchimp99]

LoL

[badgolf1]

niice planes..good job

[jauchiu]

Nice looking plane. Watch out for the guy flying the Zero, he will T-Bone you.LOL.

[nitroplanes]

@jauchiu hmmm and I wonder who the pilot was for the Zero haha

-Tony

[wazzap496]

@nitroplanes theres something i want to know. just out of randomness, i was watching Jeff's build video of this plane while admiring my own (its an awesome looking plane) and i realized that the elevators on his and the ones in this video are different than mine...they're bigger and their shape is different. It still flies great for my first plane, and i look forward to my next purchase from your site, but i would love an explanation too.

do me a favor and respond. =)

[badgolf1]

Tony..love the tips man!!..keep them coming..niiiice

[Prttimeninja2]

@nitroplanes I just looked through your videos and I did not see a p-47 2.4G Extreme Detail 5-Channel AirField RC P-47 1400MM Review. Ready2fly has the only video I know of with this bird in the air, tho there was no review.

[covercalls88]

@Prttimeninja2

Nitroplanes hasn't received the P-47 yet. When they get it Tony will test it. To bad they do have the kit version, because I'll be jumping in there and upgrading it.

[Prttimeninja2]

@covercalls88 Yea, thats what Tony told me, I agree with you, I want to buy a Kit version, that way I can put my own stuff in it and save money in the long run. If its anything like The FMS P-51 then its gonna need alot of work.

[Prttimeninja2]

These Birds are beautiful, I fly them from time to time, I do not own one but a Friend does.

Can you PLEASE review the P-47 Giant size EPO with retracts? If its anything like the FMS P-51 electronic wise then I want to know before I buy it when it finally comes out.

[nitroplanes]

@Prttimeninja2

The P-47 is not in stock yet. Still waiting for it to arrive and once it's here I will do a review on it

-Tony

[Prttimeninja2]

@nitroplanes Thanks Tony, I'll be waiting :)

[flyingchimp99]

Haven't even seen it yet but...... FIRST!!!!!!!!

[flyingchimp99]

Haven't even seen it yet ..... First!!!!!!

[dangerousprimate]

@flyingchimp99 mmm actually you are second now cos of your first idiotic comment?