Bob Long Victory Proficiency Engine Maintenance

[xTotalGhost]

Would it be fine to use eclipse gun lube on it cuz bob long said any grease??

[THESNOWYCONE]

sic grips

[rjkoneill]

good vid, nice advice too :)

[thatfingmexican]

Bob long says to put some inside the hole and on the other pieces.

[rottimus300]

Great video I'll be getting one soon. You guys keep up the good work.

[amishterminator]

Do you seriously use that little amount of dow 55? I dont overlube but you got so little i doubt there was even enough for a thin layer on all the engine orings that need grease

[paintballdude26]

is the Proficiency Engine a major upgrade from a older boblong bolt.

[adamkennard]

Is the Proficiency Engine stock on the Victory? Or is it a separate purchase like with the rest of the Marq series?

[sprint234]

nice video. this was very helpful. do you have one on the regulator?

[0230578779]

thanks 4 this maintenance..please add a full maintenance with Regulator, boardsettings and so on ;)

i want to buy this peacemaker

[buddy767]

whats the poppet seal?, is that the white part at the back of the engine?

[buddy767]

whats the poppet seal, the white part at the back of the engine?

[Neurosis1984]

I think this guy also loves dry sex *RoFl* ... Use a little bit more grease

[Ryanardo2]

Nice grips

[buddy767]

thinking on getting a new gun, victory,ego10, ironemen dm9

which one?

[PHLYEpaintball]

Victory

[noobtard4896]

ego 10

[Luketc]

Victory

[soccerguy2433]

thanks for making this since there isn't a manual!

[prooney526]

id get the creed.

[prooney526]

HaterSauce and HaterMarmalade are great for any markers, also.

[M40kc]

nice grips haha

[theitalianbubble]

Would you recommend lubing with Sleek? I might get one of these I was hoping to not buy more than I have to.

Thanks

[PHLYEpaintball]

Sleek will work on the bolt o rings... dow55 for everything else.

[theitalianbubble]

alright thanks

[soccerguy2433]

what lub is dow55?  What is Sleek? also where can I find the Victory manual that is supposedly online?

[IgnoranceInABag]

wowowoowowowo do not put grease on the bolt head

[danthebubba]

@PHLYEpaintball 2011 victory vs geo 2.1

[justis101]

I sold my EGO9 for a Angel A1 Fly (was better then the EGO) then I bought a Victory that I play with and keep the Angel as a backup... The Victory beats the EGO9 100x over...

[bl00dbaFF]

lol funny how all of you seemed to post the same thing at the same. Bitches drinkin' the haterade....

[stewey956]

You should not lube all the metal surfaces. Putting lube on the spring is useless.

[unitedgray]

Bob Long recommends gun oil on the bolt o-rings as well...he as for years.

And you don't put Dow 55 on the bolt because that causes FSDO, and if you use enough it will buildup in front of the eyes.

And the one o-ring on the back of the ram (the one o-ring you didn't touch) is probably one of the most important in the entire engine.

[PHLYEpaintball]

there was no dow55 put onto the bolt watch the vid again. Also follow the manual like I have. ****** BASIC PE MAINTINENCE******** does not require the ram to be lubed.

[unitedgray]

I never said Dow 55 was put on the bolt. I was correcting your reasoning as to why it shouldn't be used. You said that the o-rings would swell and wear out faster...that is false.

[unitedgray]

You're an idiot. You don't lube the spring or any metal components. The parts ride on the o-rings.

[PHLYEpaintball]

Then why did those parts come lubed from the factory?

[PHLYEpaintball]

It it was going to hurt the gun bob wouldnt have put it on there in the first place. Dont be a jackass. And you really shouldn't be crying about our vids that actually are doing something to help ppl. Instead of posting vids on how many modes your gun can shoot... be worth while and put your knowledge to good use if my info is so wrong.

[unitedgray]

Those metal components do not come lubed from the factory. When you shoot the marker, the lube tends to be moved around a bit, and it can appear that way. Why would you lube a piece of metal that doesn't come into contact with anything? Why lube a spring?

[PHLYEpaintball]

because it will move and touch it does not just float in the PE. I am just doing what I was told from a gun tech that was taught by bob himself. I am not going to go against anything he says bc he has never steered me wrong with in comes to gun maintenance before. Putting a slight smear of lube on the spring will not hurt anything

[unitedgray]

I didn't say that lubing the spring would hurt anything. It's just pointless. You're using an o-ring lubricant on a metal surface. Use some common sense.

[PHLYEpaintball]

Then why would you put lube on the plastic part of the PE casing? If you don't like the vid, then make your own. Our fans respect our opinion, and we put out quality information for them. I hope you can be more respectful and productive on here in the future. We appreciate you watching.

[unitedgray]

I'm not sure what you're referring to there...are you trying to refer to the white delrin donut? That would be what the poppet seals against and Dow 55 helps to swell that piece and create a better seal.

Dow 55 will not swell aluminum on the other hand.

I just get mad when people post up informative videos with incorrect information in them.

[PHLYEpaintball]

You said not to put dow55 on anything metal cause it is pointless... so you are saying that putting dow55 on the front and back half of the PE is out of the question because that is not an o ring... even though it will help the PE slide in and out of the gun??? That makes no sense.

Also you do not want to put dow55 on the seal/donut... it will cause the donut to swell and cause abnormal and inconsistent operation of the firing sequence(valve stick).

[PHLYEpaintball]

The donuts are made to fit perfectly already... unless you have a donut that was not fit properly from the factory. If that is the case call blast and they will send you a new one free of charge. dow55 on the seal would f it all up.

[PHLYEpaintball]

Also if you have a problem with this call Matt from Blast... he will recommend keeping the poppet seal clean!!!! You can not argue with that

[unitedgray]

The only part of the engine that comes into contact with the inside of the marker are o-rings. Metal does not come into contact with metal.

And lubing the donut was recommended by BLAST to fix odd leaks that the Proficiency engine had. I have done this to all 3 Marqs I have owned, and the dozen or so I have teched.

[PHLYEpaintball]

Well obviously this is not recommended by Matt who is BLAST's head tech

[IgnoranceInABag]

if you are talking about putting dow on the donut, it was recommended by terry. it is only supposed to be for the victories that were having plroblems.... and putting dow on any metal will have no effect besides having more grease in your engine that can work its way into air passages. also it wastes a lot of grease

[unitedgray]

If you really want to lube a metal surface, you should put some lube on the ram shaft because there is an interior o-ring on the poppet that needs a little lube. But you ignored that one too.

And BLAST (Bob Long himself and the rest of the techs) recommended to lube the donut to solve mystery leaks in the PE engine. There is a sticky in the Marq forum on Pbnation with this info.

Matt is referring to the sealing side of the poppet itself...not the donut.

[PHLYEpaintball]

I am sick of this convo... if you want the manual for the victory to look over for BASIC maintenance then just ask I have it and do not think it is available online yet. You will find that almost nothing you said was mentioned in it. Most importantly feel free to make your own vids since you are the self proclaimed expert on all that is bob long. Our fans will continue to watch and support us and I am sorry if you choose not to. Good day

[SuperPhlye]

you are also an asshole and for that reason people wont care what you say

[bl00dbaFF]

you're also a fucking cunt. There's a reason why we like this mate's account and if you don't then bugger off. If you're a self proclaimed guru try making some fucking maintenance vids instead of just showing people you know how to pull a trigger. Seriously piss off you stupid fucking wanker.

[09Pbking]

What the hell is your problem? If you don't like these vids then DON'T WATCH THEM.. yes, critque is good but calling someone an idiot is NOT critque. These guys work really hard on their videos and if you don't like them, then make your own.

[09Pbking]

and i'm talking to unitedgray

[Wiivolution360Lover]

My victory coming in this week and I was wondering how often to I have to perform maintenance on the PE? I play tournaments every weekend.

[PHLYEpaintball]

Not very often, I have heard some ppl not worrying about performing maintenance on it up to 20 cases.

[PHLYEpaintball]

hey I just got the manual for the victory from a great fan!

It has a break down of when to do maintenance on each part of the gun. According to the manual you will need to do this maintenance after every weekend of play... aprox 2-4 cases.

[Wiivolution360Lover]

Thanks for the info! BTW you guys are so helpful! Even for people who have experience :D

Do you think you could link the manual so I'm not blind when I get mine? haha

[BLVictory91]

Nice video of the maintenance. Bob Long does recommend using gun oil for the bolt o-rings. I have a copy of the manual from Bob Long.

[PHLYEpaintball]

Well thats good... I dont have to worry about telling people to do something that would void the warranty lol.

[ajabar805]

nice ass on the grips

[pbjunky126]

what grips?

[ccrj350]

You know how I know you're gay?

[pbjunky126]

what?

[bl00dbaFF]

do you not see dat ass?

[pbjunky126]

still dont get it. by "what grips?" i meant who makes them

[PHLYEpaintball]

haha this convo made me laugh. The grips were purchased from ansgear. They are from stinger paintball.

[bl00dbaFF]

lol my bad. I thought he didn't notice that there was a nice ass on the grips...

[pbjunky126]

k thanks, and i actually didn't notice. i thought it was white swirls. lol.

[4hardPAINTBALL]

sick grips and vids

[nikkonaa]

love the grips ;-) keep going with the vids guys

[ldimillo19]

nice vid bro

[PaintMan4499]

nice grip dude. its sweeeet!!!

[MadHatter52190]

Helpful