Hypertherm apparently doesn't recommend using Powermax with water tables. Have you experienced any problems the nozzle, electrodes or the consumables in general? Have you tried to cut with the plate underwater? If so, has it had any negative affects on your parts?
@HHOREGON on my machine i have to have the water up that high or its kinda pointless to have it. If i have it 2 inches down it doesn't catch half the smoke and none of the water comes up threw the cuts to cool the metal and keep the warpage down.
This has been flagged as spam show
Hypertherm apparently doesn't recommend using Powermax with water tables. Have you experienced any problems the nozzle, electrodes or the consumables in general? Have you tried to cut with the plate underwater? If so, has it had any negative affects on your parts?
csurowka 3 months ago
Hey man it is a great machine, do you have an e-mail to contact you? I'm very interested to talk with you about this.
jgarnav 1 year ago
great machine. are sides too high if you wanted to put a heavy sheet on?
what are you using for torch height?
automateanything 1 year ago
Did you build the table yourself and then add the electronics and motors? Can you give the build plans for this?
Porsche9874 1 year ago
Nice machine, Why in the world do you have your water leval so high??? should be at least 2 inches down from the workpiece
HHOREGON 2 years ago
@HHOREGON on my machine i have to have the water up that high or its kinda pointless to have it. If i have it 2 inches down it doesn't catch half the smoke and none of the water comes up threw the cuts to cool the metal and keep the warpage down.
jdsanchez473 1 year ago
@HHOREGON
I usually cut with the water approx. 1/2" from the surface of the steel.
It stops the thin steel from warping due to heat and also keeps the smoke down.
2" is way too low, it would not be worth having it at that level.
Some people even cut with water above the sheet!
Andysthename 1 year ago
WOW- don't know what it's cutting but it really looks impressive!!
john..
aflatminor 3 years ago