excellent vid mate .... im in the midst of building a htpc,iv got the amd phenom ii x6 processor and the gygabyte ga890gpa ud3h motherboard,would it be possible if i contact u when i start my project as soon as i get the rrst of the stuff like the h50 cpu cooler,blu ray drive,and a couple of 1tb each hard drives,can u recommend the best ddr3 ram and how much ram thank you,ive subscribed many thanks thumbs up
Nice video. I never seen anyone saying that they don`t need to remove the backplate. I just saw a video with AMD install, and he removed it. It be a great time saver and makes it a lot easier so can you confirm for a second time that all am3 socket motherboards do not need the backplate removed?
dude i need ur advice i have a really cheap cuztom pc for 200$ >_< and i have a n msi k9n6pgm2 V class mother board and i wanted to kno that that could fit into my pc
@Containforum well ty and i also wanted to kno if its that my procesors its arround 73°c when im playing cod4 my procesor is AMDx2 64 7750 2.7ghz black edition
overcloaked speed with my fan system gets to 3.2ghz but it says it can go up to 3.8 but i fires up tp 80 degrees and application crashes >.<
@Containforum im not sure... if my dad manage to delay my computer parts i may get that if it is a bit cheap...
btw... my brother is making think my technology experience is really like shit. he said he built a i7, huge case computer for around 600 dollars... is that even possible? in all possibility? he wouldnt tell me the parts and he replied "ur an idiot and u dont need to no"...
im kinda looking around to see if that's even possible... any idea O_O?
He's just being an ass. If he can't prove to you that he built it for 600 dollars then it didn't happen. Allt he prices of the parts are online. So check it out and you have a reliable idea of prices.
did you clean the thermal compound that came on the heatsink, off first? lol, or did you leave them both on? xD, and how long does the stuff you bought take to cure? anddddd.... would it be better to just leave, the stuff it comes with on? or get aftermarket? O.o
Yes, the stock compound was cleaned. The cooler had been tested prior to installation. The compound I used has no curing time. It works at it's best as soon as it is applied.
It's best to keep the stock paste on. I believe that it's a Shin Etsu. Either way the stock one is high quality stuff.
You should expect 40-50C on full load. The PC is my fathers so I am unable to test at this time. BVut it is much much quieter than the stock cooler. The stock cooler is loud enough to disturb another person watching tV in the same room. Withthe H50 they can't tell that the PC is even turned on.
Nice...you should be able to overclock it a decent amount with the H50 though. I had a PhII x4 945 before my current system and it wasn't a bad overclocker at all, even with the locked multiplier.
excellent vid mate .... im in the midst of building a htpc,iv got the amd phenom ii x6 processor and the gygabyte ga890gpa ud3h motherboard,would it be possible if i contact u when i start my project as soon as i get the rrst of the stuff like the h50 cpu cooler,blu ray drive,and a couple of 1tb each hard drives,can u recommend the best ddr3 ram and how much ram thank you,ive subscribed many thanks thumbs up
supastauk 9 months ago
Nice video. I never seen anyone saying that they don`t need to remove the backplate. I just saw a video with AMD install, and he removed it. It be a great time saver and makes it a lot easier so can you confirm for a second time that all am3 socket motherboards do not need the backplate removed?
Serpentmatrix 1 year ago
@Dog0BGYN
General use. Watching videos, mildly editing videos. Sorting out albums, burning DVDs, etc.
Containforum 1 year ago
thank god for Fast FWD
Drebln893 1 year ago
You know what makes your computer so much better?....
CABLE MANAGEMENT!!!! lol.
nice video bro.
cloud97fold 1 year ago
dude i need ur advice i have a really cheap cuztom pc for 200$ >_< and i have a n msi k9n6pgm2 V class mother board and i wanted to kno that that could fit into my pc
TheBigupz 1 year ago
@TheBigupz
Yes it will fit. Remember to subscribe to show your support!
Containforum 1 year ago
@Containforum well ty and i also wanted to kno if its that my procesors its arround 73°c when im playing cod4 my procesor is AMDx2 64 7750 2.7ghz black edition
overcloaked speed with my fan system gets to 3.2ghz but it says it can go up to 3.8 but i fires up tp 80 degrees and application crashes >.<
TheBigupz 1 year ago
would u recommend this CPU cooler? i do need a cpu cooler but at a cheap price. this seem better...
im building my own comp sooo... ya
aznfire31 1 year ago
@aznfire31
I definately recommend this cooler. It's small, it's high performance and it's cheap.
It's a very nice CPU. You can even overclock pretty well with this.
Containforum 1 year ago
@Containforum yea my cuzin persuaded me with this :D thx for the reply sir :)
aznfire31 1 year ago
@aznfire31
You're welcome. But if you want more cooling performance you can wait because Corsair is releasing the H70 soon.
Containforum 1 year ago
@Containforum im not sure... if my dad manage to delay my computer parts i may get that if it is a bit cheap...
btw... my brother is making think my technology experience is really like shit. he said he built a i7, huge case computer for around 600 dollars... is that even possible? in all possibility? he wouldnt tell me the parts and he replied "ur an idiot and u dont need to no"...
im kinda looking around to see if that's even possible... any idea O_O?
aznfire31 1 year ago
@aznfire31
He's just being an ass. If he can't prove to you that he built it for 600 dollars then it didn't happen. Allt he prices of the parts are online. So check it out and you have a reliable idea of prices.
Containforum 1 year ago
did you clean the thermal compound that came on the heatsink, off first? lol, or did you leave them both on? xD, and how long does the stuff you bought take to cure? anddddd.... would it be better to just leave, the stuff it comes with on? or get aftermarket? O.o
tigerag29607 1 year ago
@tigerag29607
Yes, the stock compound was cleaned. The cooler had been tested prior to installation. The compound I used has no curing time. It works at it's best as soon as it is applied.
It's best to keep the stock paste on. I believe that it's a Shin Etsu. Either way the stock one is high quality stuff.
Don't forget to subscribe to support our work.
Containforum 1 year ago
Nice Video.
What kind of temps do you get when at full load?
Also how much quieter is it then the stock cooler?
jase8907 1 year ago
@jase8907
You should expect 40-50C on full load. The PC is my fathers so I am unable to test at this time. BVut it is much much quieter than the stock cooler. The stock cooler is loud enough to disturb another person watching tV in the same room. Withthe H50 they can't tell that the PC is even turned on.
Containforum 1 year ago
@jase8907
Also remember to subscribe to support us.
Containforum 1 year ago
Nice...you should be able to overclock it a decent amount with the H50 though. I had a PhII x4 945 before my current system and it wasn't a bad overclocker at all, even with the locked multiplier.
IHunger4Battle1 1 year ago
@IHunger4Battle1
Yeah, I use to use it to overclock. But this is my dads PC. He doesn't need overclocking. I gave my H50 to him and I made myself a custom loop.
I have a Phenom II X6 1090T.
Containforum 1 year ago
@Containforum Cool deal man. How you liking your 1090T or is it not in operation yet?
IHunger4Battle1 1 year ago
@IHunger4Battle1
It's running very well at 4GHZ! Couldn't have asked for a better CPU at £230.
Containforum 1 year ago
@Containforum Nice nice...how bout an update vid on your water cooling? :-)
IHunger4Battle1 1 year ago
@IHunger4Battle1
Soon! Just awaiting the arrival of 2 scythe Kaze jyuni fans to go on the rad.
Containforum 1 year ago
that paste has no cure time?
snipesre 1 year ago
@snipesre
No cure time! It should instantly be at it's best.
Containforum 1 year ago