Vertical Axis Wind Turbine

[TheOpenDialog]

Can someone explain to me how the wire is collected to each other?

[marcelohimmler]

very good man!

[wind2volts]

See our web site for the International Shipping details. Currently, we are a USA only company.

[ehuber999]

I would like to order - the shop does not ......

Please send a message to ehu@ewaldhuber.de - thanks - Greetings from Germany

[wind2volts]

Paint the metal parts for corrosion protection. When used for charging a battery bank, the system voltage is constant, locked at the state of battery charge. Rotor speed is controlled by electrical load.

[SilverShotBee]

Very good design! How did you waterproof the design? Also, your turbine looks like it has the potential to spin very fast, what method do you use to stop over-voltage?

[Bsdeitch1]

Nice job. Well constructed. Have you been able to measure the output from that

And how much power is it putting out?? Volts and amps??

[tpajohnb1]

Are you using the super magnets or just regular hardware bought ones.????johnb in tpa

[midodiali]

Therefore the diameter of the rotors are smaller than the diameter strator?

magnets does not occupy the surface of the coils

[runez03]

You're welcome for watching.

[tyuiwas]

____ w w w diymagneticmotor com  has FREE energy INFO ____

[Me102288]

this is the the turbine wind gen kits dot com sells..

[taur561]

Very neat workmanship and incredibly informative. Would a second stator at the top affect the operating in any way ?. The wiring could be run through the center of the pole and possible increase output which makes it ideal for small area's where the VAWT is placed .

[myuutsuuCMCE]

5 people are blind…

[DontFriendInviteMe]

@myuutsuuCMCE 5 people work for the Saudi oil corporations. ;o)

[myuutsuuCMCE]

@DontFriendInviteMe Both. *thumbsup*

[HostileHST]

Looks to run around 500 watts max, but that would be very good to have.

[itsandbits1]

@HostileHST

in a hurricane , but it is a good steady design that is used and would probably withstand it

[levannu]

good

[fedoresko]

What is power of this turbine?

[JRudynow1]

I want 1 !

[coilsinamotor]

@walkertongdee oh :O i c

[MrSchpankme]

You never finished the series .. shame on you!

[coilsinamotor]

you sould put another roter coil at the top of the axis for duble the power :) 

[TheSolarProject]

Good Job. This turbine is very professional. Good luck with Your projects

[jonathanspindler]

just a quick question!! Im in the planning stages of my VAWT, just wondering about number of coils and number of magnets, i'm seeing alot of 9 coil, 12 magnet configurations, can someone explain to me the relationship of coil/magnet with this setup? i understand 3 phase, just wondering about the position relationship, how the magnets are crossing over the coils at any given moment ? am i making sense?

[fukyaimback]

omg that is the best thing ever...

loved it thank you =)

[steffeml]

with the Turbine you build in the video how much output does it have...in general terms what can it run? the whole house?

[L3f7y04]

@steffeml In the post he states that it typically charges only 2 batteries. At most this could charge a laptop and maybe run a tv, 1.5kW is not enough to do much more than that, like he states it is used to charge 2 12v batteries essentially its charging car batteries.

[pangavamanos]

You really have done a nice job here.

Windthot

[juancarlosruiz1985]

What is the output rating of this turbine?

[helloman1976]

Incredible design and implementation work, it's very professional. What do you do for work? You were very meticulous, well done!

[outofphase66]

what size wire did you use for the coils?

and it says " AC output is provided by a 1500W inverter"

what is the actual.watts out put are you getting 1.5kw or is that just the inverter

Thank you

[L3f7y04]

@outofphase66 @juancarlosruiz1985 The actual output is 1500 watts, the inverter only changes amps and volts by increasing one and decreasing the other. Watts is Volts X Amps so either way watts is constant. 12VDC * 125A = 1500w and after the inverter its 120VAC and 12.5A = 1500W

[TylerMontana]

this is brilliant and yet so simple. If the aliens come and see what we're still using to produce energy, they'll think we're highly stupid.

[Multi1000001]

thanks

[caporali66]

Sei molto bravo!!! OK continua così

[querdenker79]

Nice work...:-)

[NiteReepa]

TF2 Heavy: "YOU DID WELL"

[GoJian]

awesome idea. vertical axis is the way to go! how much power can you generate with this?

[bello770]

Every house in the World should have one on the roof top!

And stop burning decade trees, and dump the Oil.

[bosatsu76]

They come in kit form but this was excellent skills at work. Kudos.

[nakamuraka777]

This is amazing..Great mind .two thumbs up to your project..=>

[vivek00]

Very neat job . Is there a DIY plan for this?

[SayAgain709]

Have you considered making the ribs and spars out of aluminum as well for corrosion resistance (no dissimilar metals)? The ribs can be stamped out of thinner material and rivets and gusset plates can be used throughout Instead of welding.

[WSBToulouse]

Remarkably well done!

[Nvelascog]

Do you have a little wind speed/watt chart? I would like to build one with a 250 generator and it would help to understand thx

[MrGrimreaper1995]

that looks welgood you wana start selling nonebay or some thing for cheap people will buy

[zbitkus]

could you share cnc brochure?

[WildGhorgh]

how does the wind generator is mounted to the platform. is it via the stator? some one please explain

[WildGhorgh]

how do yo keep the water out of the stator/ or alternator

[Eaglebird]

The stator is cast in resin, so aside from the three terminals for the phases, it's completely sealed.

[salvino12]

you can have the design and number of balls through the rotor

[FridaySternShow]

what do you think the life is on one of these.

[Eaglebird]

Probably as long as the bearing lasts through weather, or until a storm speeds it over what the alternator can handle or what the structure(s) can't withstand.

[salvino12]

ciao posso sappere di wuati kw e grazie

[visra2005]

Very good I like it.

But if I need 2KW for 15m/s could you help to modify the generator?

[whtrepblcn]

visra, you can connect as many of these axial flux alternators in parallel until you reach your desired wattage.

[whtrepblcn]

Data:

At 400 RPM - 425watts

At 200 RPM - 145 watts, 25 volts (three phase AC). Very easy to convert to smooth DC.

This is the 12 mag- 9 coil design, soldered in the 'Y' configuration. Do not add magnets or coils. This is the optimum setup for this size. Many hours of R&D went into this design. Also I have some tricks to help you with the construction of this.

[steveman223]

i think its definitly more pleasing to look at then the traditional ones

[whtrepblcn]

Yes, steveman. It takes up very little room, and does not need to be directed into the wind.

[ethanhines]

how much watts of Energy does this generate?

[mrally64]

what wind speeds can and can't it run in and do you have a way off stoping it in high wind ?

[BRILLOPADral]

Ok good, but why not save some money and make the wings from wood eh????

 f in rich bastards

[mlg779]

Can u use 16 magnets instead of 12 ?

[bncesper]

I like the epoxied coils. That's gotta boost reliability big time.

[mlg779]

I'm waiting for the power test, maybe I will just buy one because takes to much to make it

[whtrepblcn]

Excellent video! I'm building this exact turbine. Very easy! I may replace the steel wing design with AL, to keep the weight down.

[chrisnotap]

does this type of wind generator create much torque? I want to make a wind device that will drive a small mechanical diaphram pump. It will pump 75 ml of water per minute. The stroke on the pump, which I have made is only 1/4 "

[jwwm2]

Absolutely the best video I've seen on this subject. Love the design, looks sturdy, and attractive.

[polarkerr]

The best I've seen so far, the most sturdy

[imikewillrockyou]

Lenz 2 turbine? Very nice work.

[joelito101]

how quickly does this charge a 1 12 volt battery?

[joelito101]

Great design.

[tartagliamassimo]

Very nice turbine! Very good job!

[terrytrooper]

very good but what is the output.

thanks

[cypresbyrne]

nice fabrication looks profesional thought out and well built well done

[cdimmm]

You have to go to wind power, to many chemtrails for solar power.

[NerdsWannaParty]

Gr8 vids!!! Awesome design! Simple and functional!

Is there the possibility of a vid about mounting the turbine... how to fix it so the magnets don't touch the stator etc... would be much appreciated and useful! Thnx Energy is FREE!!! lets catch it!

[andruha11234]

so, how many watts can this wind generate make?

[joeusa1776]

Very Nice stuff!

 I can't wait for my kit to arrive!

-Joe

[Kyrill100]

Very nice. wow! Please can you tell us a few more informations about messures and the power of the maschine?

Peter

[swedfog]

ottima realizzazione.. complimenti.

[umagrama]

I really really really really would like to know what the power generated is for such VAWT. It's beautiful!

[insAneTunA]

Awesome, I love the turbine and the video, great work !

Greets, iT

[medi40]

Hey. This is a brilliant work in every details. I like it. Think of market for it. Will you sell it as a kit? Thanks for sharing your work.

[bg0821]

nice I like it neodymium magnets also. the way to go.

[MrPizzaman09]

I was thinking an extra 3 foot in the air would probably help a lot.

[MrPizzaman09]

Very nice, you thought to use a water jet or cnc machine. Every business should have one.

[SolaPazEnergy]

Excellent work. Thanks for sharing your video. From Zaragoza (Spain)

[DeanC993]

beautiful

[michael970]

now that is a beautiful piece of work excellent job thanks for sharing your video