kinda, atm, ATM ive got i7 920 12gb 1600mhz 6x ddr3 on an asus i cant remember the name board with 2 gtx260 18gb gc, sli mode swiftech apogee 1366 waterblock swiftech v2 res, ek 120mm rad, 1/2" id 3/4" od red tubing, compression fittings, i think i covered most of it, but im gonna buy a 990x hexa-core i7, also what part of uk you from? and why you awake :P
@elliottjameswalsh Was really cheap in total, did come to about £235 in the end. How do you find the 260's in SLI? You would be best just waiting for IVY release now, but for the price don't think you can go wrong with Sandybridge bang for buck I'd own it over 980/990x... But I'm only a gamer, nice setup you have there though! I am eagerly awaiting release of Nvidia's Kepler gpus.... and with me using socket 1155 Z68 mobo I should be able to use IVY on current setup. From Merseyside btw, wbu?
@Bionikkzz i meant to put 1.8gb gc.,. erm the 260's in sli are surprisingly good, i can run pretty much everything in max only downside is theyre dx10 so no ultra dx11 on crysis 2. all in all ive paid about £400-£500 for what i got now i also got an enermax 1000watt psu which is brilliant. im gonna get a 990x for this build as this will not be my main gaming one, the ivy-bridge are suppossed to be roughly same price as sandy when new, or ill just go all out and buy a lga2011 hexa-core cpu :D
@elliottjameswalsh I hink were gonna see a whole new level of performance with IVY. I bet with a 22nm were gonna see 5-5.2ghz being the norm 24/7OC for most people. With 6ghz plus for serious overclockers. Along with probably 20% IPC boost it will scream like a bat out of hell. Of course IVY-E would be right around the corner. With an obvious price premium. I can't see ne1 using more power if IVY is what it's supposed to be.
I have a very similar build.. my 2700k idles at around 40c and it's water cooled?? And I only have it OC'd to 4GHz! But when gaming or rendering a video it doesn't hit 60c?? Is your idle temp so low because your whole system is watercooled? PLEASE HELP!
@Bionikkzz I'm not sure what you mean under load, I have the Antec KUHLER H2O 620 CPU cooler and I do have the turbo on but I was using software that came with my motherboard (asrock extreme tuner) and i just dragged the thing up to 4ghz
@IMitteh.. Under load is 'stressed' CPUs maxed out usage temps!! Because of your cooler, temps are probably correct.. Download Prime95 and Real Temp!! Get you idle and load temps. Run it for about 10min!! I totally advise against using extreme tuner!! Ideally you want turbo mode enabled to overclock that. Loads of video's on here showing you how
a really nice rig, but isn't the 2700k a waste of moneycompared to 2600k? i might be wrong but if i remember correctly, i read somewhere that it is basically a 2600k with higher multiplier and higher clock speed. i dont know though if there are any more differences.
@Galient5 .. I was thinking about getting a black one and using the white panels for it!! Prefer the black interior for sure... Black one is nice though!!!
Needs more graphics horsepower.
4x AMD Radeon HD 7970
OR
4x NVidia GTX 680 (when they are released)
FishamanP 2 weeks ago
@FishamanP 4 x GTX 680's all the way!! Just waiting for release, although I'm just going for 2.
Bionikkzz 2 weeks ago
Nice cable management, very neat and tidy :-)
snobad 2 weeks ago
kinda, atm, ATM ive got i7 920 12gb 1600mhz 6x ddr3 on an asus i cant remember the name board with 2 gtx260 18gb gc, sli mode swiftech apogee 1366 waterblock swiftech v2 res, ek 120mm rad, 1/2" id 3/4" od red tubing, compression fittings, i think i covered most of it, but im gonna buy a 990x hexa-core i7, also what part of uk you from? and why you awake :P
elliottjameswalsh 2 weeks ago
@elliottjameswalsh Was really cheap in total, did come to about £235 in the end. How do you find the 260's in SLI? You would be best just waiting for IVY release now, but for the price don't think you can go wrong with Sandybridge bang for buck I'd own it over 980/990x... But I'm only a gamer, nice setup you have there though! I am eagerly awaiting release of Nvidia's Kepler gpus.... and with me using socket 1155 Z68 mobo I should be able to use IVY on current setup. From Merseyside btw, wbu?
Bionikkzz 2 weeks ago
@Bionikkzz i meant to put 1.8gb gc.,. erm the 260's in sli are surprisingly good, i can run pretty much everything in max only downside is theyre dx10 so no ultra dx11 on crysis 2. all in all ive paid about £400-£500 for what i got now i also got an enermax 1000watt psu which is brilliant. im gonna get a 990x for this build as this will not be my main gaming one, the ivy-bridge are suppossed to be roughly same price as sandy when new, or ill just go all out and buy a lga2011 hexa-core cpu :D
elliottjameswalsh 2 weeks ago
@elliottjameswalsh lol birmingham
elliottjameswalsh 2 weeks ago
@elliottjameswalsh I hink were gonna see a whole new level of performance with IVY. I bet with a 22nm were gonna see 5-5.2ghz being the norm 24/7OC for most people. With 6ghz plus for serious overclockers. Along with probably 20% IPC boost it will scream like a bat out of hell. Of course IVY-E would be right around the corner. With an obvious price premium. I can't see ne1 using more power if IVY is what it's supposed to be.
lamiac2411 3 days ago
@elliottjameswalsh Similar setup??
Bionikkzz 2 weeks ago
@elliottjameswalsh haha! Brilliant... Yes, The Water Cooling Shop.
Bionikkzz 2 weeks ago
WELL FUCKING DONE!
ThaLaoGuy 1 month ago
@Bionikkzz Awesome, thanks!
AstarteVX 1 month ago
@AstarteVX No problem.... 580's run around 85c under full load!! Much hotter so going to look into gpu blocks soon.
Bionikkzz 1 month ago
You should see how Crysis 2 with maxxed graphics fares with 5760x1080 3D Vision Surround 2 (get three 27" Asus VG278H's).
Aphradonis 1 month ago
Vcore der CPU? über/over 1.35Volt?
Alpha6015 1 month ago
What watercooling equipment are you using?
RashidulThePlumber 1 month ago
@RashidulThePlumber :
EK-CoolStream RAD XT 240
EK-CoolStream RAD XT 120
EK Supreme LTX waterblock
Phobya DC12-260 12v Pump
Phobya balancer 150 Blk/nickel
3/8" ID (5/8") OD Masterkleer tubing
Nanoxia ''Heat Buster'' Thermal Compound
Xigmatek XLF-F1252 Backline 120mm Fans..
All compression but not sure what make they are.
Bionikkzz 1 month ago
How hot do the GPU's get while under full load, like gaming, for about an hour?
AstarteVX 1 month ago
I have a very similar build.. my 2700k idles at around 40c and it's water cooled?? And I only have it OC'd to 4GHz! But when gaming or rendering a video it doesn't hit 60c?? Is your idle temp so low because your whole system is watercooled? PLEASE HELP!
IMitteh 1 month ago
@IMitteh Have you overclocked using cpu multiplier or turbo mode increments? What are your temps under load and what watercooling setup do you have?
Bionikkzz 1 month ago
@Bionikkzz I'm not sure what you mean under load, I have the Antec KUHLER H2O 620 CPU cooler and I do have the turbo on but I was using software that came with my motherboard (asrock extreme tuner) and i just dragged the thing up to 4ghz
IMitteh 1 month ago
@IMitteh.. Under load is 'stressed' CPUs maxed out usage temps!! Because of your cooler, temps are probably correct.. Download Prime95 and Real Temp!! Get you idle and load temps. Run it for about 10min!! I totally advise against using extreme tuner!! Ideally you want turbo mode enabled to overclock that. Loads of video's on here showing you how
Bionikkzz 1 month ago
@Bionikkzz thanks so much, i couldn't find any decent information anywhere, you helped a lot, thanks!
IMitteh 1 month ago
@IMitteh No problem
Bionikkzz 1 month ago
a really nice rig, but isn't the 2700k a waste of moneycompared to 2600k? i might be wrong but if i remember correctly, i read somewhere that it is basically a 2600k with higher multiplier and higher clock speed. i dont know though if there are any more differences.
Biostorm7 2 months ago
@Bionikkzz nope, white, although im going to buy a black one aswell, build a seperate system in it and then install arch linux.
Galient5 3 months ago
@Galient5 .. I was thinking about getting a black one and using the white panels for it!! Prefer the black interior for sure... Black one is nice though!!!
Bionikkzz 3 months ago
@Bionikkzz The phantom as well, great case, I love it so far.
Galient5 3 months ago
It's fucking gorgeous, I'm working on a build with similar aesthetics, this just made me want to speed the entire process up ten fold.
Galient5 3 months ago
wow that is cable managed really well, very nice m8
TheRushfx 3 months ago
@Bionikkzz yea... :) you have nice overclock i have just 4.3GHz. yea but i like 580 in 3Dmark its high ranked :) and gpu to and psu :)
xMmymy 3 months ago
@Bionikkzz heheh :) whys that ? XD
xMmymy 3 months ago
lol i have all most same rig but i have gtx 580 power supply nzxt 1000w and motherboard: Asus extreme rampage 4 it cost 600-700 dollars :D
xMmymy 3 months ago
It should be PSU: Cooler master 1000W Silent Pro Modular not PSU: Corsair 1000W Silent Pro Modular.
DanRoh123 3 months ago
work of art. Well done.
raginube 3 months ago
How'd you get it so quiet? :O
ZeroColourz 3 months ago
This has been flagged as spam show
Man that thing is quiet.
DreDrizzah 3 months ago
how do you like the case? might get it soon
staticslipk5 3 months ago
nice and clean :)
demo8dave 3 months ago
I do love to see a tidy and yours is definitely one of the best
MonsterMoshi16 3 months ago
usa=shitty country with full of inmigrants ;)
xxxXXXCH04XXXxxx 3 months ago
Nice opinion...we 're english
TheMojojojomark 3 months ago
yeah, an english = shit
xxxXXXCH04XXXxxx 3 months ago
gay
xxxXXXCH04XXXxxx 3 months ago
Nice! What did you use to do the pain job? A matte black spray paint?
PaBl0T1n 3 months ago
gay
xxxXXXCH04XXXxxx 3 months ago
Comment removed
TheMojojojomark 3 months ago
This has been flagged as spam show
says you Gaylord
TheMojojojomark 3 months ago
very nice
vcore a 5ghz ??
timousatk 3 months ago
dude that is the cleanest cable management I have ever seen awesome rig!
Thegamingkid1000 3 months ago
nice rig boinks
TheMojojojomark 3 months ago