2006 Mustang GT: Dyno Pull Video

[rahu8670]

good numbers for just intake hpipe and exhaust. do u know what ur baseline pull was before ur mods?

[TacoBill35]

@rahu8670 No baseline numbers, but probably in the area of 270 rwhp.

[rahu8670]

@TacoBill35 ok koo. yea thats about the area I was expecting. I wish I had did a baseline before I started modding

[GMurphSC06GT]

put the edelbrock supercharger on it and you'll really be flying.

[MOTYJDM]

THATS "SWANSON" FOR ALL U GUYS!!!

[sctlivewire]

how come u only have three hundered hp

[TacoBill35]

that was to the wheels.

alot higher now, but still need to break in the motor.

[caseyryeback1913]

That would be at the wheels which I'd estimate as being around 340ish bhp at the flywheel/crank. Very impressive. Most stock GT's out the factory make 300bhp at the crank - so 300bhp at the wheels is very good. Nice power figures TacoBill :) What's it like to drive - does it pull hard from low down revs?

[TacoBill35]

shootit89.. sorry, deleted ur comment by accident. I only ran the car on their dyno, not dyno tuned there. I was running a BamaChips tune at the time.

[Kooly1]

awesome car dude, i wanna do this with the stang ima get

[Poohcifer]

First of all.. LOVE IT!! and DAMN YOU'RE LUCKY!!

Second.. not to sounds so ignorant.. but what does a pull do? Tests the torque?

I am a newbie to this mustang stuff.. since hubby don't trust me with 'cars' yet, he got me a v6 2004 mustang.. I only do short run..discreetly.. it's fun and I want to find a way to spike it up REALLY BADLY..any suggestions?

[Poohcifer]

Thanks, I'll be working towards that goal...and will be looking for BIG results..LOL.

She ain't as BAD ASS as yours...

[hammetowns92]

by spike it up do you mean go faster? if thats the case go with the simple mods first like exhaust, cold air intakes, headers, SCT chips, and a lower set of gears.

[1970mopar383]

nice stang. one question what would u rather have a saleen or a roush? j/w

[TacoBill35]

Both are nice, just depends which body kit you like.

[1970mopar383]

what about twin screw or roots supercharger?

[TacoBill35]

I'm not too familiar with either, but I've heard the twin screw is the preferred one to go with.

[ramairgto72]

You have a centrifugal supercharger like the ones that mount like an AC compressor and you have Roots that attach to the intake like the old 6-71.

[Kooly1]

lol i know u didnt ask me but id rather have the Saleen. Roush can run pretty high priced cuz theyre hard to come by. the engines alone are expensive

[brobinson75]

Nice car. Is it used as a daily driver, or just your sunny day weekend car?

[TacoBill35]

Sunny weekend car. =)

[fcpsan]

Good vids bill. I just purchased a used mint 06 GT about a month ago and let the mods begin. That Raptor shift light mounted in the outlet is cool. I am going to look into that myself. Keep up the great work!

[mooch37]

I'm still trying to figure out how it's only 305 max hp when it's supposed to be 300 stock, right? And you have have several performance mods on there so shouldn't it be quite a bit more than that? Don't take this as a negative comment, I'm just confused by the numbers.

[TacoBill35]

That's 305 Rear Wheel HP, which translates to around 350 HP at the crank (assuming a 15% driveline loss). Dyno's register RWHP, not flywheel (or crank HP), so you'll need to do the math to convert it back to the flywheel.

[dlcblue50]

Good stuff man, post up the new video too.

[dlcblue50]

What all mods are done???

[TacoBill35]

At the time of this dyno run video, FRPP 4.10 Gears | K&N CAI | Pypes O/R H-Pipe | FRPP Stingers | BamaChips 91R Tune.

I gotta head back to the dyno soon, just got thru installing C&L Racer CAI, FRPP CMCV Deletes, Steeda UDP's, and Coast 1-pc aluminum driveshaft.

[shreddmasterj]

Pypes sound the best in my opinion. Ive done my fair share of shopping around. Corsa is a close second. Stang sounds sic man!

[jbob727]

you need to put a supercharger on it, that will add 150hp at least

[Riverluck90]

I love this fucking sound of the mustang GT :-)

[shatter71]

Nice power!