Added: 2 months ago
From: UKOGjonboy
Views: 10,612
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (58)

Sign In or Sign Up now to post a comment!
  • thanx for replying and for the help ukogjonboy :

  • @dragonsxshadow You're welcome, glad I could help

  • i hope you don't mind me asking im thinking of ordering this wheel but im a lil worryed about holding the wheel in place how do i do that cos i've seen other vid where people have bolted it to tables im not able to do that as i only have one table so i would need to take the wheel off and on the table.

  • @dragonsxshadow No trouble at all, hardmounting is definately the way to go if you can, but if you can't Fanatec do the "Clubsport Table Clamp" on their site, under Racing Wheel Accessories it's €49.95 and should work for you. Alternatively there's the Rennsport wheel stand, or the GamePOD Wheel stand or also the Wheelstand pro. Google all three of those names and you should find what I'm looking for. Good luck.

  • Hi,i have a problem i can't use my shifter Paddles , How can i set it in F1 2011 and forze ?

  • Oh and does it have an xbox microphone port?

  • @TROUS3RS Yes it does, but a lot of people complain about the Mic ports on all Fanatec wheels, some people get a lot of feedback or intermittant comms. I've always used a wireless mic myself.

  • How big are the firmware updates? 1gb?

  • @TROUS3RS Not sure on the size, I don't think they're that big though.

  • Can you tell me if the Driver update on the Fanatec Support page is the firmware update or something else? I just received my elite today and it only has the 707 installed. If you have a tip on the best way to install the new firmware, I would really appreciate the help. Thank you

  • @berkley15 Hi, the klatest firmware is on the Thomas Blog at Fanatec's site. You will need to upload FW 720B to get the best from your wheel. The new uploader makes it very easy to install the Firmware, I'm no IT expert by a long way yet just by following the instructions carefully I've installed all FW's so far with no problems.

  • UKOG the shifter on the wheel( not the H shifter) sorry for my english i'm not english guy

  • @domdom3d1 In that case I don't know, you'll need to contact Fanatec all the contact info is on their website.

    Good luck

  • Is it just me or does the wheel rim looks like the Momo from Logitech?

  • My csr elite wheel work perfect but my shiter on the wheel do not work ?? Your csr elite wotk with forza on the xbox but my wheel do not work with them!!! Please tell me why do not work ??

  • @domdom3d1 Is it the 'H' Pattern Shifter? Have you tried calibrating it?

  • This wheel looks extremely cheap and toyish compared to the GT2 and GT3 wheels and the price is ridiculous:0!

  • Hi jonboy, very sorry to hear about that. I hope you get everything sorted out, it's a bad time of year for that to happen.

    I done the firmware update with great ease (1st time)

    All the best bud, hope you have a better end to the year.

    Regards

    Stu.

  • Hi jonboy, got mine today :) but due to man- flu I've Havnt removed it from the box. Have you got a video in the wings on how to do a firm ware update?

    Regards

    Stu.

  • @V6stu Hi Stu, glad you've got yours. I didn't do a vid on FW updates ... I was planning to but I know Thomas has been working on a new updater so my vid with the old updater would have been a bit pointless. I'm afraid I'm out of action on vids for a while, my house got struck by lightning and among other things my XBox and PS3 are fried, but compared to no heating and a fried car the consoles are at the bottom of the list of priorities. Hope to be back in the new year.

  • Guy if you want to make a review of the racing wheel, you should show how it work with corners, loss of control, tire bumps etc.. not in straight line... |face palm|

    Sorry, but I hope you will understand, it's just constructive criticism.

  • @marinhosgi Yep that's all coming soon, the straight line stuff was for ACL, hoping to get to FFB etc as soon as possible

  • how do you have the wheel mounted? My main concern is that it looks like the wheel comes out of the base straight instead of at an an angle and i won't be able to get it in a comfortable position to drive. I have a playseat and it only allows you to raise/lower the wheel..not adjust the angle.

  • with manual with clutch and ACL turned on do you need to use the clutch on downshifting or is the shifting treated as if you were just running manual (meaning no clutch needed on downshifts)?

  • Can we have tis ACL on older wheels? I think that it is possible. Probably we have to wait some time for updated 681 version of firmware.

  • Looks like a great wheel. I will have to start saving up for one of these babies.

  • I notice you pressing the A button after selecting a menu option with the D-Stick and I was wondering if you can simply click the D-Stick in instead of pressing A to select the menu option?

  • @HomeskooledVideo Good question...pressing A is just a force of habit, I'll give it a try and get back to you soon.

  • @HomeskooledVideo I've been away and had a look and yes, you can click the D-Stick as an alternative to A

  • @UKOGjonboy

    Awesome, thanks!

  • Sorry but i have to say this, your reviews are just horrible, its not about the information you give but the way you are doing it.

    I just dont understand how fanatec could send you this wheel for testing.

  • @DaniloJFPica Thanks for your feedback, I know what you mean and I'm trying my best. In what way would you like me to improve what I'm doing? I'm afraid making videos is not a skill I've ever been taught so I'm just doing the best I can, I hope to get across as much information as possible, it may not be as proffesionally put together as others may do but the important info gets across all the same. I am open to suggestions on way to improve if you'd like to send any, be my guest

  • The scene cuts is the first thing i would improve. Then try to be alone when your filming and dont move that much the camera.

    Just watch other videos on youtube of csr elite reviews.

    If you could try the force feedback speed turning with drift settings on 5 compared to the GT2 wheel. I would like to know if this wheel works fine for drifting, because the porsche wheels and the csr were not that quick for countersteering in drifting, even with drift settings on 5

  • @DaniloJFPica Hopefully my latest vid should be of a higher standard ... have you seen it yet? It's taken into account your advice before I evne read it LOL

    I'll get to FFB etc soon but today there's been another FW update which has massively improved the FFB from the already awesome level it was at anyway, so it's gonna take some more testing.

    I hope my next vids are more up to the required standard for you.

  • what's difference to manual with cluth vs ACL ? i dont seem it is any faster than manual clutching and i dont find it realistic

  • @maverickcro There's not much difference, it just means you don't need to be a finger gymnast or use the clutch pedal to activate the clutch. In my experience it's more realistic than the alternative, I have driven a few real race cars on various tracks from Open wheel to NASCAR and the only one that required a clutch to shift was the NASCAR, other than that the clutch was only for pulling away. The way Clutch is used in FM4 and GT5 is very unrealistic so ACL brings the realism back

  • awesome review again, however do you use it with PC simulation racing games? like GTR Evo and iracing? I dont think console racing games are the same level of pro simulation as the games you get on a PC.

    would be interesting to so some review with GTR evo / F12011 & iracing on the PC

  • @sk8guitardrums I'm afraid I don't have a PC able to run the great sims, but I do have copies of F1 2011 on XBox and PS3 so will get testing with them as soon as I can.

  • Even though the video is not good quality I enjoyed it a lot and got some important info, thanks mate!

  • @ilonioum Thanks, I'm painfully aware that my videoing skills aren't of great quality, but I hope to be able to show as much as I can and as may of the features as I can on as many games as I can so you can make up your own minds.

  • Hi jonboy, review is better than I could of hope for :) now I'm really glad I pre ordered one. Thankyou bud and keep up the good work.

  • @V6stu Thank you

  • God Damned cheaters already in the game. So if I were to just buy the madcatz wheel I'd be left in the dust right?

  • @wastnTIMEwastnTIME Nope not at all, the exploiters have always been in the game, this new feature just negates the exploits that others have found with controllers. The ACL works best on the slower cars and hardly makes any difference from S Class upwards ...

  • How much did this cost in the UK?

  • @HalfDread87 It's €499 which at the moment works out at around £420, you can only buy it direct from Fanatec on their site.

  • this is not really a review is it lol, showing every mode and show every 10 increment omg

  • @skneo219 I'm trying to show every aspect of the wheel that I can so that you can make your own minds up about it, this is just the start. I'll be doing several videos, and will fit them in whenever I can. I have a very busy real life so will do as much as I can whenever I can.

  • @UKOGjonboy looking forward too those tell us about how it drives. the ffb and how quick and responsive the wheel is. detail in ffb does it feel better different more information ect.

  • @skneo219 Will do, I've got a very busy week this week, but I'll do my best to show and illustrate everything I can on every game I have.

  • @UKOGjonboy I was wondering how the fanatec CSR and the CSR Elite play on Gran Turismo 5. I'm trying to decide between the CSR and Thrustmaster T500 RS. I like what I've heard so far about the Thrustmaster T500 RS for the PS3 and GT5 but I also own forza 4 and would like a wheel that's also compatible with both systems. I know about the how expensive the CSR Elite is specially since I also want the ClubSport pedals. That's why I asked about the Fanatec CSR Forza 4 wheel (not the Elite). thx.

  • @Mthoroughbred Yep no worries, things are really busy right now, at home. Got a few Uni deadlines to meet and still sorting out our house after our lighning strike. I'm hoping to be able to continue my vids and tests in the next couple of weeks. Unfortunatley the lightning fried my PS3 so I have no GT5 gamesaves, and even less enthusiasm to go through the grind again. But I WILL be getting on it soon and will do a thourough test.

  • Comment removed

  • @lass8477 Do you man ACL? The info is in the vid.

  • Do you have any idea when Fanatec will start taking orders for the elite wheel?

  • @SpontsXF1 Sorry no, you'll have to keep an eye on the Thomas Blog for those details

  • That ACL is a bit of a cheat! At least pad users have to time a button press. Not sure I'd use it if it came to my Turbo S, not that I even have the game yet anyway. Keep up the good work.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more