Best West Point Bridge - $137,124.02

[Reaganfball28]

Great Job on the bridge, would you consider sharing it me? Would really appreciate it

[nanderson2015]

can i get this bridge im not sure how to private message.

[johnnyboyyyy69]

could u make a download link for this bridge i need it

[rj979]

Is that made of all hollow tubes, besides the bottom?

[MrSnowrocks]

Can I get the download please? I would like to compare it to my $167,000 bridge for 2012. Ill even send you the link to my bridge.

[dasniper4xx]

how did you get it so that there were members on both sides?

[Kayla2258]

@morrowindwaytoomuch did you use 2007?

[morrowindwaytoomuch]

@Kayla2258 Yes, as both my tags and the program in the video suggest.

[tiffy82twgps]

i have to do this for homework but i have to use the 2011 version and the bars, trusses etc. are all more pricey than the 2007 version. can you post your lowest bridge using the 2011 version?

[6737577]

I'm usin this to win the bag of skittles thx nerdz

[kpdoney]

Can any please help me and give me prints for a cheap bridge(I only need it to get an a NOT FOR A CONTEST) for 2011 west point bridge builder please!!!

[uvegotamossieonurbak]

DIS BE CUL. lol.

[capritubeHD]

YEA

[n62vlt]

i got $133,165.50

[paladain55]

@n62vlt ON 2012?

[stingray11x]

@paladain55

What? Do u need it for cheating purposes????

[paladain55]

@stingray11x nope, i already have a better design

[firehot427]

it deosnt sopode to slack at all and your goal is to amke it under 250,000 dollars

[gaudreaumaxime]

whats the truss you used

[morrowindwaytoomuch]

@gaudreaumaxime I didn't use any of the preset bridge designs, and I couldn't tell you what truss structure it is.

[hardcoregamerz4life]

can u make a good one on 2011 program?

[morrowindwaytoomuch]

@hardcoregamerz4life With time, yes, but I doubt it. I think 2011 has regulations on cable size, which would severely cap price.

[hardcoregamerz4life]

@morrowindwaytoomuch btw i just got 2nd at florida's state level bridge building :)

[morrowindwaytoomuch]

@hardcoregamerz4life Congratz.

[TheDragonn29]

@hardcoregamerz4life good job, meanwhile im directed here while doing research to make a cheap WP bridge, under 255,000, or 210,000 to get an A :(

[tiffy82twgps]

@TheDragonn29 i need to get it under 200,000 to pass

[TheDragonn29]

@tiffy82twgps god i feel sorry for you. did you need it to be max length?

[tiffy82twgps]

@TheDragonn29 yep

[tiffy82twgps]

@TheDragonn29 you bet

[TheDragonn29]

@tiffy82twgps i know, it sucks to have such a difficult goal to reach, actually if i didnt lose all the work due to a recent computer crash, i would upload the bridge design i finally came up with

[TheDragonn29]

@TheDragonn2 actually its still in my email (THANK GOD) so ill upload it to mediafire. here's the link on mediafire. just addthe missing mediafire.c om/dow nloa d.p hp?zn gezqtm884 jyhh

[TheDragonn29]

@TheDragonn29 what the hell does youtube have against links?!?

[metalstorm91291]

Very awesome. I used to fool around with WPBD 2007 a lot. My cheapest is $141,687.91 with the same deck elevation. One question though, which deck material and loading do you use for your bridge?

[morrowindwaytoomuch]

@metalstorm91291 All three.

[metalstorm91291]

@morrowindwaytoomuch What? I mean did you use medium-strength concrete or high-strength concrete for your deck material and the standard 180 Kn truck loading or the 660 kn permit loading?

[morrowindwaytoomuch]

@metalstorm91291 Medium-Strength. I keep everything on default, as was required for the competition I was in.

[whipcreamonthefloor]

I made a bridge somewhat like this one but I could only get it down to about 163,000. How did you make the bars on the top of the bridge hollow?

[MrMadMurder]

its a smart design and cheap but... No person 9n real life would drive or a bridge that bent that much

[Kitunamishi]

@MrMadMurder It actually doesn't there is a exaggeration effect during the load test that can be toggled

[morrowindwaytoomuch]

@Kitunamishi I just run defaults.

[MrMadMurder]

@Kitunamishi I am not making a huge comment jsut stating what I see in the vidio

[OUR1stBORNson]

hey can you give me the download plz

[xXDaRkNoScOpEXx]

Could u please make a download link for this bridge please man :)

[Doofusinater]

My most expensive bridge is 458,634,766,425,

[morrowindwaytoomuch]

@Doofusinater Whereas no one is impressed due to context of your situation, I do believe you are lying. Not because of the sheer size of the number, but the very copypasta-like extra comma there.

[42gamemaster42]

dude i have this west point bridge designer as a project in school and i neew to make a bridge under 200,000 for an A+. can u help?

[darkgodofgames]

@42gamemaster42

if its not too late, i may be able to help. one very good way to get about 190k-180k is go to 0m depth, then just make a low profile bridge, decreasing the size of the members to about 100 where possible, then as high as necessary to make the bridge work. this is using the 2011 version.

[leeiawright90210]

i will give you my email so u can contact me

[leeiawright90210]

can you show me how to make this bridge i really want to learn. i have wpbd 2010 on my laptop!!!! PLZ PLZ PLZ

[mideo2011]

grr I'm at 138,986 I used and under bridge truss design

[ridindirty22405]

i could never get under 400K

[MegaPanther2000]

im at $183K

[marschke77]

download link?

[morrowindwaytoomuch]

@marschke77 description

[BaboonAndWeasle]

@morrowindwaytoomuch please send this link to me, i really need this design(for school), because i've tried thousands of times and always failed or went over budget

[BaboonAndWeasle]

@morrowindwaytoomuch dude i need this for school, please send me the link, if not i'll probably fail

[kisa154]

GIVE ME THE DAM MESSURMENTS BITCH

[kisa154]

LIAR i COPIED THIS AND IT DOESNT WORK WHATSOEVER JERK

[leosynomi]

i have gotten 98,678.09

[morrowindwaytoomuch]

@leosynomi Ego altus dubio.....

[nigahigafan02]

@leosynomi LIAR!!!!

[blackvolt24]

@leosynomi how?

[morrowindwaytoomuch]

@blackvolt24 Don't worry, he's lying.

[MoonstarWStarmoon]

More than 50 people.

[morrowindwaytoomuch]

My official turn-in price was 136,550.06. I got 4th out of like 50 people. 1st place had theirs down to 132,000.

[swagbuckskid100]

can u e-mail me the bridge design because i cant re - creat it.

[swagbuckskid100]

do u have any tips for new bridge builders?

[morrowindwaytoomuch]

@swagbuckskid100 Try to look at mine. Use a smooth arch for the top. Use hollow tubes for everything. Your main goal is to try and get everything to 1 compression or tension. The inside bars (the "x's" and straight up and down bars) are carbon steel. The top is mostly high-strength, and the bottom is quenched and tempered. Now that you know this, you can easily get down to 140K without any more help.

[swagbuckskid100]

@morrowindwaytoomuch i made the same bridge and the price is 202,786.25 do u think there is a glitch in my software?

[morrowindwaytoomuch]

@swagbuckskid100 are you using 2007 or 2010?

[swagbuckskid100]

@swagbuckskid100  2010

[swagbuckskid100]

@swagbuckskid100 ty for ur help.