That thing pulls pretty good man. I have that same AEM AFR gauge, it looks like you were running really lean in boost on the video though. I hope you arent running AFRs like 14-15 like it looks.
lol...nawh that's all i been doing is googling. giving me alot of bullshit every time i search just trying to get this shit finished so i can sell and start this gnx replica off a t-type
@onet1me2007 dont no what manfacturer they were but u can find this shit on ebay. or online somewhere. dont b lazy google home boy its ur best friend LoL. and it came stock with them like i stated perviously
@zakzhoe Dude, you speak of not being lazy. Don't take offense to this, but look at your writing! You write like shit! You should be embarrassed! You need to clean that shit up, my man. I don't care if you are using a mobile device or not. LOL
@zakzhoe Either [1] you were unable to comprehend my comment or [2] you chose to be asinine ...how nice. If you appeared as you comment, you would appear unattractive. Truth is neat.
@zakzhoe And I'm sorry, but I felt guilty not tossing you a bone. I said, "Don't take offense to this..." Did that part zoom sky high overhead of you? :)
i need some help finding parts for an 88 tsi. shit is driving me crazy 2.6 is said to be a peice of shit but i wanna build it strong any suggestions other than swapping the motor would help.......please help
@onet1me2007 build the bottom end good. forged crank, pistons, rods. that will run u like 400 or 500. then have the head gone thru and redone, cut new valve seats have it re surfaced 3in exhaust and bigger turbo. and either blow off or bypass valve with it, and a hard pip kit 4 the intake system. thats pretty much all u can do
nice dude what you got done to it my friend has one that has some top secret work done lol you can watch it on my channle destroy a v6 camry, v6 tiburon, and even chace down the v-6 camry after spinnin the tires in 1st and 2nd
@DSMeclipsegst only a G16 turbo upgrade. using the full turbo LoL i think the head was gone thru and re surfaced, new vavle seats were cut and such. and a 3" exhaust nothing else really
Naaa.... ive owned 3 of these cars and none of them failed me over 15 psi... my newest one is a 88 esi-r with a 850 primary and a 1000 secdary injectors. welbro 95 psi 255lph fuel pump turbo back 3 inch exhaust. a full msd set up with a over drive vacum system i came up with for the msd set up i got running the stock bottom end with a fully ported head i done. port matched intake and exhaust. and runniung the stock 12 a but ported to its max turbocharger and a new/ custom cam i made..
Nice! I have a 92 VR4.. However I am also looking to get a 87,88 or 89 Conquest TS-i!.. I love these cars so much =)
LordKylik 5 months ago
@LordKylik same I have a 92 3k vr4 and just recently became obsessed with finding one of these
oneslowVR4 1 month ago
@Trickphlow No he says recording.
w3bbgh0st 9 months ago
That was fast. Should have shut the windows. :-)
StangQuest94 10 months ago
@StangQuest94 i wasnt driving otherwise i would have
zakzhoe 10 months ago
Sell your car, and get a real camera
archon808 1 year ago 5
@archon808 LoL
zakzhoe 1 year ago
Looks like you had the handbrake on
archon808 1 year ago
That thing pulls pretty good man. I have that same AEM AFR gauge, it looks like you were running really lean in boost on the video though. I hope you arent running AFRs like 14-15 like it looks.
donovansayler 1 year ago
@donovansayler car has been sold.. long time ago
zakzhoe 1 year ago
lol...nawh that's all i been doing is googling. giving me alot of bullshit every time i search just trying to get this shit finished so i can sell and start this gnx replica off a t-type
onet1me2007 1 year ago
@onet1me2007 ill do some research 4 u then. ill send u links in a message when i get back home later on 2night
zakzhoe 1 year ago
what type of pistons and where did you get them?
onet1me2007 1 year ago
@onet1me2007 dont no what manfacturer they were but u can find this shit on ebay. or online somewhere. dont b lazy google home boy its ur best friend LoL. and it came stock with them like i stated perviously
zakzhoe 1 year ago
@zakzhoe Dude, you speak of not being lazy. Don't take offense to this, but look at your writing! You write like shit! You should be embarrassed! You need to clean that shit up, my man. I don't care if you are using a mobile device or not. LOL
9b8 1 year ago
@9b8 how i write and how much im willing to research r 2 different things, u cant compare my typing 2 researching. LoL dumb fuck
zakzhoe 1 year ago
@zakzhoe Either [1] you were unable to comprehend my comment or [2] you chose to be asinine ...how nice. If you appeared as you comment, you would appear unattractive. Truth is neat.
9b8 1 year ago
@zakzhoe And I'm sorry, but I felt guilty not tossing you a bone. I said, "Don't take offense to this..." Did that part zoom sky high overhead of you? :)
9b8 1 year ago
@9b8 no i can read
zakzhoe 1 year ago
@9b8 no i can read
zakzhoe 1 year ago
@9b8 no i can read
zakzhoe 1 year ago
my bad thought it wasnt' posting
onet1me2007 1 year ago
@onet1me2007 hahahhaah no big man and no it was stock with deep dish pistons 2 handle the xtra boost :)
zakzhoe 1 year ago
damn....has the motor blown yet? where do you get your parts from?
onet1me2007 1 year ago
damn....has the motor blown yet? where do you get your parts from?
onet1me2007 1 year ago
damn....has the motor blown yet? where do you get your parts from?
onet1me2007 1 year ago
how much boost do you have
onet1me2007 1 year ago
how much boost are you pushing
onet1me2007 1 year ago
@onet1me2007 18 - 20 i think
zakzhoe 1 year ago
thanks...but where do you get all your parts i couldn't find shit for it a summit racing..
oh do you know where to find alum heads for it?
onet1me2007 1 year ago
i need some help finding parts for an 88 tsi. shit is driving me crazy 2.6 is said to be a peice of shit but i wanna build it strong any suggestions other than swapping the motor would help.......please help
onet1me2007 1 year ago
@onet1me2007 build the bottom end good. forged crank, pistons, rods. that will run u like 400 or 500. then have the head gone thru and redone, cut new valve seats have it re surfaced 3in exhaust and bigger turbo. and either blow off or bypass valve with it, and a hard pip kit 4 the intake system. thats pretty much all u can do
zakzhoe 1 year ago
nice dude what you got done to it my friend has one that has some top secret work done lol you can watch it on my channle destroy a v6 camry, v6 tiburon, and even chace down the v-6 camry after spinnin the tires in 1st and 2nd
DSMeclipsegst 1 year ago
@DSMeclipsegst only a G16 turbo upgrade. using the full turbo LoL i think the head was gone thru and re surfaced, new vavle seats were cut and such. and a 3" exhaust nothing else really
zakzhoe 1 year ago
Lets see your POS Omni, Daytona, and Talon do this, this fast!
carnypimp 2 years ago
LoL F-yeah!
zakzhoe 1 year ago
@carnypimp FUCK YOU. EVERY CAR YOU JUST NAMED BLOWS THE SHIT OUT THESE HORRID MOTORS.
BlueSpottedSpoons123 1 year ago
@BlueSpottedSpoons123 Shit your just mad because those car I just named are nothing but POS's. Conquest is way better!
carnypimp 1 year ago
even said 0-100 miles in the begining
iminsane84 2 years ago
Nice so whats done to it. ive had mine well over that but i am just asking... im pumping 21 psi max and 20 hold. with other mods and its fast as fu#$
starionboi 2 years ago
i think he had a G16 in that at the time
that was putting like 16 pounds or more
im not totally shur but yeah
zakzhoe 2 years ago
damn 21psi? i thought n e thing over 15 or 16 is gunna blow the motor unless u have a lot of mods? wut u got?
showoff07 2 years ago
Naaa.... ive owned 3 of these cars and none of them failed me over 15 psi... my newest one is a 88 esi-r with a 850 primary and a 1000 secdary injectors. welbro 95 psi 255lph fuel pump turbo back 3 inch exhaust. a full msd set up with a over drive vacum system i came up with for the msd set up i got running the stock bottom end with a fully ported head i done. port matched intake and exhaust. and runniung the stock 12 a but ported to its max turbocharger and a new/ custom cam i made..
starionboi 2 years ago
that was my car.........and it was in mph
mistapickles 2 years ago
i miss that car
:(
zakzhoe 2 years ago
oh my god... is this in miles or kilometers?
accordv6er 3 years ago
miles
zakzhoe 3 years ago