would it work just as well if you didnt have the metal frame holding them together? Like if you taped them together or something. Would that cut down on the resonance? Cause I dont know how to make the metal frame
Even though it's not a full octave, you still put what you had to good use! I'm really impressed with this, but might I suggest trying the same concept with metal instead?
theyre wayy to hight pitch, and youre hitting the plastic. Use a little thicker rubber or w/e is on that and make it an octive lower. (excuse the bad spelling)
I like the frame to hold the pipes. U have now to choose notes and tune the tubes accordingly. Open tubes= length is 1/2 of the wavelength
close them at the end and it's now 1/4, so shorter. U'll get proper resonance. then use a better membrane (of your choice). Voila... a super cool instrument.
Wavelength is 345/frequency of note. well just FGI. Needs work but You're on the right path.
Instead of plastic for the part you hit, try using something softer like rubber. Take a old bike tire and split it down the middle. Cut out a small bit and stretch it over the tube and then tape/rivet it into place.
The way you have it now sounds good, though. It sounds more like small tom-toms tuned to a specific note.
the colored ends are tape, holding a plasitc mouth to the end of the tube. Softer, air-tight mallets would work if the pipes were open (as the blueman use) but it is VERY tricky to strike the drum to get a good sound... So I did it my way. :)
tis a dragon secret... lol. naw, I got some thin wall 3" pvc, cut it into small rectangles, put batches of it in the oven on 150 for 10 minuts to get it all soft, took them out, sandwiched them between tile, and let them cool while flat. I cut them out to fit the mouth of the tubes, and taped them on. no glue. when struck, they viberate the air inside the tube, which gives the drum its 'pitch'. :)
The tubes are only 2.5". the longest tube is 39" and the shortest one is 18". the metal skeleton is from 3" fence post and 1/4" metal rod. Besides the welds, everything is held together by colored electrical tape. :)
not yet. The songs I can play that use all the tubes are limiting. I'll figure some more out and post them all in a single vid if you all would like. thanks for the comments!
would it work just as well if you didnt have the metal frame holding them together? Like if you taped them together or something. Would that cut down on the resonance? Cause I dont know how to make the metal frame
actrisgirl 8 months ago
It sounds great.
keyboardjeff 10 months ago
FAIL
intheshapeofhuman 1 year ago
you just made that up there and then didn't you..?
macdoran1994 1 year ago
noob
stapadanoob1 1 year ago
nice touch with the tie-dye shirt
Pimpmister78 1 year ago
blow into it
boinske 1 year ago
how did you make the ends of the tubes
mrfaget13 1 year ago
blue man group
MetalDrummer6928 1 year ago
how do you know what length of tube to use?
Gongerhockey22 1 year ago
your good i really would like to video chat
wolfeatmeat 2 years ago
ahahah a lost blue man group
pacoeras 2 years ago
that's COOL!
thetruekris 2 years ago
sounds awesome like super dodge ball kenya level for nintendo
zyxwfish 2 years ago 3
lol are those devil sticks?
Dharmazing 2 years ago
A tip, rig those to mics (preferably one mic in each tube) and then DIST THEM. FUCK. YEAH.
W4RW017 2 years ago 3
check out Harry Partch
medanzig 2 years ago
those tubes have endless possibilities!
DullPencil101 2 years ago
very cool!
this summer I hope to make some sort of pvc instrument.
guzza72 2 years ago
hahaha thats pretty awesome
Digitz111 2 years ago
stoner fail
enemygaming 2 years ago 8
ahahha totally... so fuckin funny
TheSleepingVillage 2 years ago
Even though it's not a full octave, you still put what you had to good use! I'm really impressed with this, but might I suggest trying the same concept with metal instead?
Hyenajaws 2 years ago
Metalpipes sounds so good <3
W4RW017 2 years ago
Pretty cool man.
Uberfoxbob 2 years ago
i want that thingy.
gaara924 3 years ago
Check RHYTHMTANDEM for another rare instrument.
rhythmtandemplayer 3 years ago
copy and paste if gears of war 2 brought you here
joeym15028 3 years ago
Ever seen the Blue Man Group? You'd like them a lot, they use the same thing like you are, but more expansive.
DSJeffers 3 years ago 3
Read the description...
Piratezrule 3 years ago 2
Ah, My bad lol. Forgot to read it this time. Cool vid though.
DSJeffers 3 years ago
its cool, just get annoyed sometimes
Piratezrule 3 years ago
hey at least he tried. Takes practice. its hard to do it.
struckmand 3 years ago 2
This has been flagged as spam show
your fucking gay
physco41 3 years ago
larry write is awesome!
ninjamonkies99720 3 years ago 3
This comment has received too many negative votes show
he sucks!
ninjamonkies99720 3 years ago
^^ flipflop
Dashinto 3 years ago
Ringo would kick your ass.
unnamednewbie13 3 years ago 2
your a total chode
foolsbetrippin 3 years ago 2
Awesome dude. Your playing is sloppy is all.
kjpdqpb 3 years ago 2
This comment has received too many negative votes show
that sux
KINGNEF 3 years ago
theyre wayy to hight pitch, and youre hitting the plastic. Use a little thicker rubber or w/e is on that and make it an octive lower. (excuse the bad spelling)
RenoGregory 3 years ago
wow garbage! but hey you tried!
bigtnew 3 years ago
This comment has received too many negative votes show
you suck at druming
cheesenberger44 3 years ago
This has been flagged as spam show
THIS IS THE STUPIDEST THING EVER!!! BUT I LOVE MY MOM AND DON'T WANT TO TAKE ANY CHANCES!
If you do not copy and paste this onto 10 videos your mom will die in 4 hours
NFL9104 3 years ago
I actually thought it was pretty cool
I kind of want to make one now
in fact... I really wanna make one
Qiwolf 3 years ago
This comment has received too many negative votes show
you are just a kid banging on sticks...that sounded like shit
jdugan999 3 years ago
and wheres your vids of you playing a musical instrument that you created yourself?
OMGlo0lz 3 years ago 4
I like the frame to hold the pipes. U have now to choose notes and tune the tubes accordingly. Open tubes= length is 1/2 of the wavelength
close them at the end and it's now 1/4, so shorter. U'll get proper resonance. then use a better membrane (of your choice). Voila... a super cool instrument.
Wavelength is 345/frequency of note. well just FGI. Needs work but You're on the right path.
bheumez 3 years ago 4
ahhh, my brain!
togaman13 3 years ago
@bheumez Hey DUDE! i am trying to make an instrument like this. I am not getting all the physics talk. Could you clarify please?
What's better: leaving the tubes open or closed to get more resonance?
thanks in advance :-D sorry for my english.
tolmol 1 year ago
"big bravo"^^ HAHA!
MrEhmKay 3 years ago
"much more beter"
kurt9898 3 years ago
C'est génial!
shashmaqom 3 years ago
maybe with some good sounding wood would be much more better..
big bravo for the idea!!!
:)
znatizeljac 3 years ago
Don't ever say "big bravo"
jgood911 3 years ago 7
hahahaha
Xioustic 3 years ago
Why???
kamerius 3 years ago
Because he sounds like a rump ranger
jgood911 3 years ago 3
hahaha fuckin big bravo
kurt9898 3 years ago
big bravo on his gay ass comment
jgood911 3 years ago
blue man group does something similar to that.
its pretty neat.
haleyT2011 3 years ago
This has been flagged as spam show
GAY ! ! !
Moocho77 3 years ago
awesome!
weaver2109 3 years ago
Instead of plastic for the part you hit, try using something softer like rubber. Take a old bike tire and split it down the middle. Cut out a small bit and stretch it over the tube and then tape/rivet it into place.
The way you have it now sounds good, though. It sounds more like small tom-toms tuned to a specific note.
Andyman3k 4 years ago
try some soft mallets and what are those colored caps on the end of the pipes?
basementconspirator1 4 years ago
the colored ends are tape, holding a plasitc mouth to the end of the tube. Softer, air-tight mallets would work if the pipes were open (as the blueman use) but it is VERY tricky to strike the drum to get a good sound... So I did it my way. :)
BalthezarArith 4 years ago
thats great! if you wanted to experiment with sound you might try some softer (might have to homemade) mallets. 5/5
ilikescreaming 4 years ago
really cool dude
frejtlejs 4 years ago
Your audience includes a bag of cat food?
cpsurf 4 years ago 3
me encanta, suena muy bien, jeje!
fotoplomer 4 years ago
I thought you were going to blow on the tubes, but you hit them and played them...
BeastG400 4 years ago
Naaaaaaaaaaaice
porilaud 4 years ago
como le hiciste esas boquillas a los tubos?
geldof75 4 years ago
VERY AWSOME DUDE
13STRINGS 4 years ago
what did u use to cover the end that your hitting
hopetown366 4 years ago
tis a dragon secret... lol. naw, I got some thin wall 3" pvc, cut it into small rectangles, put batches of it in the oven on 150 for 10 minuts to get it all soft, took them out, sandwiched them between tile, and let them cool while flat. I cut them out to fit the mouth of the tubes, and taped them on. no glue. when struck, they viberate the air inside the tube, which gives the drum its 'pitch'. :)
BalthezarArith 4 years ago
real cool! if u want to make summin similar i recoment u visit wx3(dot)bmgconstruction101 (dot) c0m
Bluemansoup 4 years ago
Wow lol at first I thought it'd be big, lol. cool though.
SlimZj 4 years ago
The tubes are only 2.5". the longest tube is 39" and the shortest one is 18". the metal skeleton is from 3" fence post and 1/4" metal rod. Besides the welds, everything is held together by colored electrical tape. :)
BalthezarArith 4 years ago
Pretty cool :D
monkeyboi159 4 years ago
great, but i've seen it before.
slayer884 4 years ago
Pretty cool!
EmperorEthan 4 years ago
interesting !
gori914 4 years ago
Pretty cool, dude!
RocketRodder 4 years ago
Got any more videos of you playing this?
Broshmosh 4 years ago
not yet. The songs I can play that use all the tubes are limiting. I'll figure some more out and post them all in a single vid if you all would like. thanks for the comments!
BalthezarArith 4 years ago
I AM 5TH
doodoobrains666 4 years ago
Nice
iceforthecards 4 years ago
VERY GOOD!
ScheissLeben 4 years ago
perty cool
LeviMan2001 4 years ago
not bad, good job on that one
Sweaves 4 years ago